Reviews
OEM style
It is rather heavy and seems to suppress the vibration of the Handlebar. I like the fact that it is not elaborate in design, but just OEM style. View detail
Sufficient quality at a low price
Fit to the inside diameter of the SteelHandlebar.
The price is just so low that you should not expect any texture.
There are Small scratches on the surface treatment and if you look closely, there are no problems at all in my sense.
Rather, it has an unobtrusive feel like OEM Parts, which is rather pleasing.
Anodized treatment and bar ends with unnecessary decorative cutting can make the whole motorcycle look cheap.
The mount is a type that is inserted into the handlebar, and by tightening the bolt at the end, the rubber parts inside expand and hold it in place. This method is sufficient because the parts are not to be attached and detached many times.
It has a moderate weight, so it may have more anti-vibration power than the lightweight Type made of resin or Aluminum.
We do not expect excessive durability. I don't know yet, but it seems to be NORMAL durable.
View detail
Fits: HONDA APE50 AC16, HONDA DAX ST50, HONDA MOTRA , HONDA CHALY, HONDA CUB90, HONDA GORILLA, HONDA MONKEY
If you are a CUB rider, take a good look at it before you snap it up.
I bought it without hesitation because it was marked for SUPER CUB.
Now I'm going to put it on and see how short it is.
Is this Suspension to make a short height car?
This Site has a number of traps like this, and I'm not tired of them, but I'm sick of them.
View detail
Fits: YAMAHA JOG R APRIO 10M|M 4JP1, YAMAHA JOG R APRIO 10M|M 4JP6, YAMAHA JOG R APRIO 10M|M 4JP4, YAMAHA JOG R APRIO 10M|M 4JP3, YAMAHA JOG R APRIO 10M|M 4JP2
SUPERValue JOG 220mm Shock
For general use.
No hindrance whatsoever.
Cospa, I think it's outstanding.
just (e.g. "just wait here")
if I must say
It's a little soft.
Rank.
If you're riding around town, this is one I recommend.
View detail
More than the price
I wanted to put on Plating's Mirror, I honestly thought it would come at a good price, but Plating is beautiful and it doesn't shake at all while driving, so I think I got a great deal.
Now we'll see what happens with Rust and other things after the rain.
View detail
I'm happy with the costumer!
I recently added a new motorcycle to my car and the Bar End was falling apart, so I was looking into buying a new one and found this product.
The deciding factor in the purchase
The price is very low, and the size was easy to imagine in the picture. I don't have a particular interest in Bar End, so I think it's enough for me.
My Thoughts on Actual Use
I think the product is solid for the price. The accuracy of the parts is good and the packaging was tight. However, the inside is not tapered, so if you tighten it down, it may interfere with the grip of the Throttle depending on the car model, which may make the feel of the Throttle operation worse.
[About the exterior]
The paint is partly uneven and there are some minor dents in the paint for the price. I didn't care about it because you have to look at it carefully.
What I'd like to see improved
As mentioned above, I would like to see a looser taper shape on the inside and an improvement in the texture of the exterior. Well, the price is the price, so if you're looking for that much, you may want to choose a different manufacturer's product that's a bit more expensive.
Products compared
I compared Posh face, KITACO and other sites, but finally I bought this product because it was inexpensive and the size was easy to understand.
【Review】
If you're a stickler for detail, I think other manufacturers' products are better, but only if they come with it like I do. I would recommend this product to anyone who wants to use it. It's not too bad for the price, but it's not too bad for the look of the product it's installed on, so I think it's a good cosmetic product.
View detail
Fits: YAMAHA VINO 5AU, YAMAHA VINO SA10J
It is easy to install.！
I bought them both to replace this time
Installation is just a matter of removing the screw with the +Driver and replacing the cover!
It was very easy to replace it with something beautiful
We had to increase the number of pieces to install two this time "2" I bought it as a
Number "1" You'll receive two items in the box at the same time, so be careful not to make a mistake
View detail
No different than an OEM!
The OEM Cover started to corrode and was the same again at the end of Season, even after polishing it I bought it because it was cheap and almost the same as the OEM Product I removed the OEM cover and reused the bolts to complete the replacement So you'll barely see it, but I'm happy with it, so I give it five stars! View detail
The best part is that it's a cosmetic
The end cap of the NS-1 I got used was scraped and cracked, so for Because it was this quality at a lower price than OEM, I bought it for Replacement I'm satisfied View detail
awful
The inner diameter of the Handlebar of our motorcycle is 17mm, and the size is also 17mm I bought it in the range of millimeters to 18 millimeters, but I had to tap into it by force, and even if I did, I couldn't insert it all in Right It looks bad
Also, there are many deep scratches once opened
View detail
Fits: KAWASAKI Z250F T, SUZUKI GSX400 F, SUZUKI GS400, YAMAHA XJR400, YAMAHA XJ400, HONDA CB400, KAWASAKI ZEPHYR400, SUZUKI GT380, SUZUKI GSX400 S, HONDA CBX400 F, HONDA CB400SF, KAWASAKI ZRX400, KAWASAKI Z400FX
That's what happens to the cheapest things
When I installed it and tightened it up, it was brand new, but the oil started blowing out of one side and I got confused
It's too bad it's brand new
But it's a cheap one, so I figured it's no use
It's definitely not a good fit for the ZrX400
Be careful what you buy
View detail
Fits: YAMAHA JOG 3WF Wiring may need to be extended depending on the model year., YAMAHA Wiring may need to be extended depending on the year of the JOG 3RY., YAMAHA JOG 3KJ Wiring may need to be extended depending on the year.
Super Value Tail Light Assembly
great quality and fast shipping will order again soon the fitting is ok and the packaging is superb i will restore my jog good as new thanks Webike MARAMING SALAMAT FROM PHILIPPINES! View detail
For the Mini bike race
I bought it for the Mini bike race
It's not a dress-up, it's just for Grip protection, so no problem
The color is also normal black, so you can touch up if you need anything I'm satisfied because it's cheaper than making it by myself
View detail
Fits: HONDA TACT AF54, HONDA TACT AF24
It's just cheap
The Gold amount is cheap, but that's just it, the quality is terrible, Large dust, Large thread [Color] Large amount of contamination in the Clear layer
Level that cannot be used first
I contacted him, but he hadn't contacted me in two days
I don't think he's inspecting them
It's funny that they're going to ship this to you
I'd like to be Minus one more star
View detail
It is an excellent item for COSPA.
The price is cheap, but it is used without problems.
It can not be used for Aluminum Handlebar to correspond to Steel handle.
Because it is a semi-matted black color, roughness of the finish is not conspicuous.
View detail
Fits: HONDA APE50 AC16, HONDA DAX ST50, HONDA MOTRA , HONDA CHALY, HONDA CUB90, HONDA GORILLA, HONDA MONKEY
About applicable models
Written as CUB 50 adaptation, but the length is not enough at all.
I think that it is very kind to be able to display the length of the OEM ratio on compatible models.
I ordered Long end eye on another mail order site.
View detail
Fits: YAMAHA JOG 3WF Wiring may need to be extended depending on the model year., YAMAHA Wiring may need to be extended depending on the year of the JOG 3RY., YAMAHA JOG 3KJ Wiring may need to be extended depending on the year.
Excellent product.
Without a doubt, the product is of excellent quality and meets all my needs. Good cost-benefit, although unfortunately shipping to Brazil is still expensive. As good as the original piece, it gave new life to my yamaha jog 50cc. Without doubt the product is of excellent quality and meets all my needs. Good cost x benefit, although unfortunately shipping to Brazil still be expensive. As good as the original, gave a new life to my yamaha 50cc.(translated by Google Translator) View detail
What was the shape of Shock?
A word - - - Boko ~ ~ ~ ~ !!!
Because there is a tie of more than 60 characters, there was no function as Shock at all,
It is immediately removed..
View detail
It may be important to COSPA
I bought it for gold price adjustment for free shipping
Would you consider it a good price for the price?
It seemed like that.
I think that it is the cause of my own environment
RightHandlebar side (Throttle side) If you attach it to a feeling
Does it interfere with Throttle cone or Grip? Since Throttle's return is bad
Is it a place like caution when installing it?.
View detail
Fits: HONDA APE50 AC16, HONDA DAX ST50, HONDA MOTRA , HONDA CHALY, HONDA CUB90, HONDA GORILLA, HONDA MONKEY
I installed it in MONKEY Z50J ♪
It is almost a normal monkey except Exhaust System.
So, I thought whether to change the suspension without having to change it, I was thinking to change it just by looking, and I was looking for a noticeable suspension and this suspension was noticed ♪
I immediately purchased it and installed it, as I saw it, the impression changed and I liked Large ♪
I am very satisfied ♪
View detail