Reviews
It is easy to install.
It was easy to install and looks really cool. View detail
I finally bought it after many years of hesitation.
I had wanted to install it since the time I purchased Motorcycle, but had put it off for a long time. At the time, the price was in the low 100,000 yen range, but the price has been increasing every year, and I took the plunge and purchased it before the price was revised again due to the recent high cost of living.
As a result, it was the right decision to purchase Large. The color was close to my personal favorite shade of Green.
The installation of the threaded part of the stopper that fixes the tank cap was very difficult, so we asked a friend of ours who is good at maintenance to install it for us. This time, the installation was done in the garage, but I do not recommend outdoor installation because I was afraid I would lose the smallest return spring if I skipped it outdoors. I think that if you buy this part directly from DOREMI, they offer installation service, but if you buy from ECSite, they do not offer this service, so I think it would be better to sell it with the lid installed on the tank from the beginning even if the price is higher.
I was able to install the ZEPHYR1100 cook without interfering with the frame as per the information on the Net. (The Instruction Manual also shows how to avoid interference, but it was easier to install without thinking about it.)
The key of the Seat was put in the Limit though it seemed to interfere with the hole of the Side cover by using the Snap on Key ring.
I thought the quality was such for the price, but personally, I am Large satisfied (I might not have felt this way in the past when the price was in the low 100,000's.) If you are a Style-oriented person, you will be satisfied.
The ride feeling is the same as the DOREMI Seat that was installed at the same time, and the hold does not get worse, nor is there any difference in ride quality. (Personally, I prefer this one)
I purchased OEM parts such as Fuel Cock, Fuel Float, Packing, etc. from Kawasaki's OnLineShop in advance, and installed them with a friend who is knowledgeable in maintenance. If you are not confident about maintenance or cannot prepare OEM parts, it would be better to ask a store to install them for you.
View detail
I thought this is what it would cost.
DOREMI's Fender is expensive, so we chose this one, which can be made into Plating at a low cost.
The color of the OEM version doesn't match the color of the Z2Tank, so I decided to go with the OEM version.
The quality of the product is not as good as I expected, and there are some large distortions and scratches, but I think it is reasonable for the price.
Unlike DOREMI's steel-made one, this one is made of resin, so it is lightweight and rust-free, so I think it will do for the time being.
View detail
Rear fender installation This should be there.
[How is it used?
Was the one you received as per Image? Yes
Was the installation difficult? No
How was your experience with it? Good vibes
[Included Parts:were they on? Yes
[Was there anything that disappointed you? (after the -te form of a verb) not ..
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: YAMAHA TT250R, YAMAHA DT200WR, SUZUKI RMX250S, YAMAHA SEROW225, SUZUKI DRZ400S, SUZUKI DRZ400SM, YAMAHA WR250R, YAMAHA WR250X, YAMAHA DT230LANZA
good-looking
I wish Packing had been included as it is expensive for a Gas cap. View detail
I wanted to use it once, so I bought it!
I bought it because Manufacturer is well known and I wanted to try it once! The installation was rather easy! View detail
Delivery time is too late.
I waited 4 months, but this is the third delayed email.
Please clarify the delivery date before putting it on the market.
I can't wait any longer.
View detail
Fits: KAWASAKI ZEPHYR1100, KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS), KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYRX
Installation on OEMFender is challenging.
Installed at the same time as DOREMI's Z2 exterior.
Since the OEMFender was cut off to make the Fender Eliminator, it was installed directly on the OEMFender.
I thought about PMC's conversion Mounting Bracket, but I found a picture of Bracket's Bracket visible from the side, so I put it on the OEMFender as is.
The following installation problems were encountered
When the screw position on the top is aligned with the OEMFender hole position, it makes contact with the Rear cowl and the Rear cowl cannot be installed.
The screw position of the Lamp was slightly distorted and was not in Center. (Forgot to take a picture).
The screw positions on the side do not match the OEMFender hole positions (this was assumed).
I could have solved the problem by cutting the tap on the tail lamp side, but I got carried away with processing the Fender side and drilling holes and adding an aluminum plate as a bracket, which took quite a long time and resulted in a large change in installation.
However, thanks to the work, we were able to install the tail lamp in a good position without it sticking out too far from the rear cowl.
It would be easier to buy an external Fender Eliminator Kit or a DOREMI plated Fender.
View detail
Fits: HONDA 400X, HONDA 400X, HONDA BROSProduct1, HONDA BROSProduct2, HONDA CB-1, HONDA CB-1 TYPEII, HONDA CB1000R, HONDA CB1000R, HONDA CB1000SF, HONDA CB1000T2, HONDA CB1100, HONDA CB1100SE, HONDA CB1100EX, HONDA CB1100BLACKSTYLE, HONDA CB1100RS, HONDA CB1100E Package, HONDA CB1100RS Final Edition, HONDA CB1100EX Final Edition, HONDA CB1300 SUPER TOURING, HONDA CB1300SF
I use it all the time
I have used this product many times already!
That means it's a good product. I have no complaints about the price and quality so far! I will buy again!
View detail
Might be too upscale for the DRZ.
Setup to MOTARD is uncomfortable! View detail
It is too luxurious! Too carefully made and took a long time to install.
The product is so carefully made that it took me a long time to install and set it up! View detail
To prevent theft.
[How is it used?
Used in SMARTMonitor Intermediate Mount
Was the one you received as per Image?
Image
How was your experience with it?
It is a simple anti-theft measure, but it is definitely more effective in deterring theft than the hexagonal screw type we used to use.
This effect for 1,000 yen is sufficient!
[Points to note]
None
How did it compare to other products?
No comparison.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
feel well
[How is it used? Key Holder
Was the one you received as per Image? Yes
How was your experience with it? It feels right.
[Points to note] Nothing in particular?
How did it compare to other products? A bit pricey, I guess.
If it is a bit cheaper
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Hose Band is not Fashion
I was torn between Mukawa and KITACO. I was torn between the Mukawa and the KITACO, but I chose the KITACO because the Mukawa is taken out from the filter part, which makes the hose longer, which I don't like.
I wanted the 3-decker, but it wasn't in stock and the delivery date was undecided, so I had no choice but to go with the 5-decker (I think the 3-decker has more pressure and cools better).
I prefer to take it out from the Head because the Hose is shorter I don't like that the Banjo is Red I prefer Black
I had Takegawa's Stealing Damper, so I had to do some modification, but it wasn't too difficult.
Of course the Hose would be better looking with Mesh, but I don't think it would be possible with that length!
I can forgive the hose band because it's not just a rubber hose, but the hose band has a Showa-era look to it. It looks lame, so is there anything better? I'm wondering if there is something better.
If we can work out the Hose Band, I'd give it a 90.
View detail
DAYTONA Slender Helmet lock Dial type
Installation was easy and management of the Helmet was much easier. View detail
Fits: HONDA Rebel1100 DCT, HONDA Rebel1100 DCT, HONDA Rebel1100, HONDA Rebel1100
Shared with ARAI RAPIDE-NEO and Henry beguineDHS-4
Shared with ARAI RAPIDE-NEO and Henry beguineDHS-4 at Reble 1100
[How is it used?
Used to secure helmet during touring
Was the one you received as per Image?
Street Image
Was the installation difficult?
extremely easy
How was your experience with it?
When sharing with ARAI RAPIDE-NEO and Henry beguineDHS-4, especially when removing the helmet, the helmet lock can be removed. "Key" Generally satisfactory, although there are some points where it is difficult to operate the
The attached photos are as follows.
Quantity:1 pc. Eyes:Installation status on Reble 1100
Second one.:Situation with ARAI RAPIDE-NEO fixed
Third one.:Helmet lock's "Key" The situation in which the Income is attached, "Key" Although it is difficult to manipulate the "+", it is tolerable.
Quantity:1 Set of 4 pcs. Eyes:Henry beguineDHS-4 situation with DHS-4 attached
Fifth.:Interference with Side Back when Helmet is fixed to Up. "Key" difficult to operate
Sixth.:Interference between the helmet and the side back when the helmet is fixed in the downward position, "Key" It is easier to operate. However, it does not look good.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
It works fine
[How is it used?
Two months after installation. Used when leaving the house for long periods of time, such as at a roadside station.
Was the one you received as per Image?
It is exactly as shown in the Image. It is not particularly intrusive and convenient.
Was the installation difficult?
It took some time to adjust the length of the Bolt, but it was installed without any problems.
How was your experience with it?
It allows me to place my helmet safely when I leave my motorcycle for a little longer. My motorcycle did not have a helmet lock, so I installed it later.
[Included Parts:were they on?
It came with a long Bolt, a short Bolt, and an adjustable component.
[Was there anything that disappointed you?
Not particularly
View detail
For Present.
Purchased for my brother's celebration.
His comments were as follows.
I have been interested in the DoubleName Jacket by MOTUL and helstons for a while.
The fabric is firmer than a regular denim jacket, and there is no sticking point, so there is less fatigue after long hours of driving. It is thought that it is suitable for use in other than midwinter and midsummer. In addition, since the Protector is built in, I think that Damage to the body will be reduced in case of emergency. The sleeves are a little long, but when you ride with gloves on, the cuffs don't come out of the cabra part of the gloves, so I think this will be a merit in terms of windproofing at the cuffs. The dyeing looked a little uneven in the pictures on the website, but it was dyed more firmly and there were no problems. Overall, the product is better than the price, and the sewing is very good, with no sagging or holes at all.
It was also equipped with an Inner, making it windproof.
View detail
![TFX4 [TFX4] Gloves](https://img.webike-cdn.net/catalogue/images/117177/TFX4_brown_TS.jpg)
Rough Sewing
The sewing of the left hand small finger part is poor, and the fabric is sewn more than necessary, which makes it stick out and cause pain. 。 Right hand side is not a problem.
If you are a Manufacturer specializing in Gloves, please do it right.
View detail
Fits: HONDA CT125・CT110 HUNTER CUB, HONDA PCX, HONDA PCX160, HONDA Rebel1100 T, HONDA BENLY110, HONDA BENLY110PRO, HONDA BENLY50, HONDA BENLY50PRO, HONDA CB125R, HONDA Dio110, HONDA PCX, HONDA PCX160, HONDA LEAD125, HONDA CB250R, HONDA FORZA, HONDA ADV160, HONDA XL750 TRANSALP, HONDA Rebel1100, HONDA ADV150, HONDA Rebel1100
Adhesive strength is sufficient
This double-sided tape is not for its original purpose because it has great adhesive strength, but I cut it into a round type and use it to fix the speaker in the helmet! I'm glad that I don't have to worry about it coming off because I can fix it so tight! I also use it to hold my Motorcycle ETC, Solar light, etc. … I use it for many different purposes. Anyway, if you want a tape with strong adhesion, I recommend this tape, although it is rather expensive! View detail