Reviews
Fits: HONDA CT125 HUNTER CUB, HONDA , HONDA CT125 CT110 HUNTER CUB, HONDA PCX150, HONDA PCX160, HONDA PCX, HONDA PCX150, HONDA PCX, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125 Special edition, HONDA PCX125, HONDA PCX125
Warm Touring
Used for Kawasaki SUPER SHERPA
Effective for winter touring, forest roads, and city driving I was skeptical before installation, but now I can't take it off.
The wiring is a little thick, so it is difficult to handle, but it would be better if it were thinner.
View detail
Fits: Others , HONDA glom, HONDA CB125R, HONDA XR230, HONDA XR250MOTARD, HONDA VTR250, HONDA NIGHTHAWK250, HONDA VT250 SPADA, HONDA CB250F, HONDA CB250R, HONDA CRM250AR, HONDA CRF250RALLY50, HONDA CRF300L, HONDA CB400F, HONDA CB400SF, HONDA 400X, HONDA NC700S, HONDA NC700X, HONDA PCX, HONDA FUSION
Polygon Mirror
Good height when mounted and good range of Mirror coverage; seems to be more integrated with the vehicle body than the OEM.
Note that the Left SideBracket must be replaced with an O?Normal Thread Screw, which requires the purchase of a matching bracket for some motorcycles.
View detail
Fits: BMW G310R, HONDA Cross Cub110, YAMAHA XMAX, HONDA Monkey125, HONDA CT125
Good but expensive,
It works and looks good Parenthesis, but it is a bit expensive, View detail
Fits: BMW R nineT 100 Years, BMW R nineT 1200, DUCATI Scrambler 800 Desert Sled, DUCATI Scrambler 800 Classic, DUCATI Scrambler 800 Desert Sled, DUCATI Scrambler 800 Classic, DUCATI Scrambler 400 Sixty 2, DUCATI Scrambler 1100 Tribute Pro, DUCATI Scrambler 1100 Sport, DUCATI Scrambler 1100 Special, DUCATI Scrambler 1100 Pro, DUCATI Scrambler 1100 Ducati Club Italia, DUCATI Scrambler 1100 Dark Pro, DUCATI Scrambler 1100, DUCATI Diavel 1260 S, DUCATI Diavel 1260 S, DUCATI Diavel 1260, DUCATI Diavel 1260 Lamborghini, DUCATI Diavel 1260, DUCATI Diavel 1200 Titanium
The texture is great.
I replaced the Mirror on my SUPER SPORTS750 because the vibration made it impractical. The finish is very good, as expected from Rizoma.
It was very solid and did not loosen at all after Touring.
There is no Instruction Manual, but you have to go to the site.
Quantity:Pair (for Left and Right) It is important to note that this is not the case.
I am satisfied with the styling.
View detail
Fits: SUZUKI GSR750, SUZUKI GSX-R1100, SUZUKI GSX-R150, SUZUKI GSX-S150, SUZUKI GSX-S750, SUZUKI GSX400 IMPULSE, SUZUKI V-Strom1000, SUZUKI GSX-R125, SUZUKI GSX-S125, YAMAHA XMAX250, SUZUKI SV650X, SUZUKI SV650, SUZUKI GSX-S1000, SUZUKI GSX-R1000R, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI V-STROM800DE, SUZUKI GSX-8S, SUZUKI GSX250R, SUZUKI Hayabusa
One point appearance UP!
[How is it used?
Street riding/Touring
Was the one you received as per Image?
*Yes.
Was the installation difficult?
*It's easy.
How was your experience with it?
Red is the one point that stands out because of the black color of *Engine.
[Included Parts:were they on?
*O-rings are not included, so prepare them.
[Was there anything that disappointed you?
No *. It was as expected.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: YAMAHA X-MAX250, YAMAHA XMAX300
I like the sound.
The sound is a little bit louder than the NORMAL sound, but I like the bass a lot. The design looks good. View detail
Fits: HONDA BENLY50, HONDA DIO110, HONDA LEAD125, HONDA glom, HONDA CB125R, HONDA XR230, HONDA XR250MOTARD, HONDA VTR250, HONDA NIGHTHAWK250, HONDA VT250 SPADA, HONDA CB250F, HONDA CB250R, HONDA CRM250AR, HONDA CRF250RALLY50, HONDA CRF300L, HONDA CB400F, HONDA CB400SF, HONDA 400X, HONDA NC700S, HONDA NC700X
Too low in height to see back.
Need a separate height adjustment Screw as you can't see the back. View detail
Fits: KAWASAKI Ninja400, KAWASAKI Ninja250, SUZUKI GSR750, SUZUKI GSX-S750, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Ninja ZX-25R, HONDA CBR250RR, YAMAHA XMAX
Easy install. And looks amazing.
Brought as a addition to the yoshimura GP magnum exhaust. The heat shield really finishes it of. And looks amazing. Very easy to fit to. My second purchase of the same item View detail
Fits: HONDA CT125 HUNTER CUB, HONDA , HONDA CT125 CT110 HUNTER CUB, HONDA PCX150, HONDA PCX160, HONDA PCX, HONDA PCX150, HONDA PCX, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125 Special edition, HONDA PCX125, HONDA PCX125
Palms are HOT!
[How is it used?
I don't ride much in the winter, so I don't have much chance to use it,
It is a good decision to purchase this product because there is no Minus side.
To prevent accidental operation while driving, a separate Switch is used.
Was the one you received as per Image?
The texture of the Grip is good, just like the Image.
Was the installation difficult?
At first, I wired from around Headlight, but it was an old car with low power generation, and I got an error.
I have tried to pull from Battery via KIJIMA's Relay and it works fine.
How was your experience with it?
The heat is transmitted through the winter gloves, so the effect is Large.
That makes the back of the hand feel colder, as others have written, so the Handlebar Cover and Quantity:I think it would be perfect if used in a Set.
[Included Parts:were they on?
Everything necessary for the equipment was included, even the Wiring Connector and Tie Wrap.
[Was there anything that disappointed you?
Not particularly
View detail
Fits: APRILIA RSV4 Factory , APRILIA RSV4 Factory APRC , APRILIA RSV4 R , APRILIA Tuono 1100 V4 Factory , APRILIA Tuono 1100 V4 RR , BMW C 600 Sport , BMW C 650 Sport , BMW F 800 R , BMW G 310 GS , BMW G 310 R , BMW R 1200 GS , BMW R 1200 GS , BMW R 1200 GS Adventure , BMW R 1200 GS Rallye , BMW R 1200 R , BMW R 1200 R , BMW R 1200 R , BMW R 1200 R Classic , BMW R nine T 1200 , BMW R nine T 1200
Rizoma Bar end weight
I added a rhizoma from OEM Weight.
Since it is light, there is vibration, so it may be necessary to adjust the Weight depending on the Motorcycle.
I am satisfied with the design and texture I chose for this project!
Next, try Bar end mirror.
View detail
![Mirror [Circuit 744]](https://img.webike-cdn.net/catalogue/images/23069/BS201B-1_TS.jpg)
Fits: KTM 990 Super Duke, INDIAN MOTORCYCLE FTR 1200 S, INDIAN MOTORCYCLE FTR 1200, KTM 790 Duke, KTM 790 Duke, KTM 1290 Super Adventure S, KTM 1290 Super Duke R, TRIUMPH Tiger Explorer 1215, KTM 890 Duke R, KTM 1290 Super Duke R, KTM 390 Duke, KTM 125 Duke, KTM 1290 Super Adventure R, TRIUMPH Street Triple RX, TRIUMPH Street Triple R, TRIUMPH Street Triple R, TRIUMPH Thruxton 900 ACE, TRIUMPH Tiger 800, TRIUMPH Street Twin 900, TRIUMPH Thruxton 900
Not suitable for city driving
It is a flat mirror, but the way it looks is not right! It is hard to get a sense of perspective, it is too small to be suitable for public roads, and of course, it will not be inspected.
If you choose just by looks, Motorcycle looks fast and ?????>?
View detail
Fits: HONDA CB1300 SUPER FOUR, HONDA CB250F, HONDA CB600F, HONDA CB900F, HONDA CBR900RE, HONDA CBR900RR, HONDA CRF230L, HONDA CRF230M, HONDA DIO110, HONDA GROM, HONDA LEAD125, HONDA NX250, HONDA SH125, HONDA XR250L, HONDA XR650L, SUZUKI B-KING, KAWASAKI ER-6n, KAWASAKI Ninja ZX-6R, KAWASAKI Z1000, YAMAHA YZFR3
Grip is good
Purchased Grip to replace KITACO High Solo.
In terms of design, it was chosen as the design that is typical of Honda vehicles.
There is a choice of softness and "Normal." It is only a little softer than NORMAL, so I chose
It can be used without any particular discomfort.
View detail
Fits: HONDA CB1100, HONDA CB250R, HONDA CB300F, HONDA CB400SB, HONDA CB400SF, HONDA CB400X, HONDA CB500X, HONDA CB650R, HONDA CBR400R, HONDA CBR400R, HONDA CBR500R, HONDA CBR600RR, HONDA CBR650R, HONDA CBR650RA, HONDA FTR223, HONDA FTR223, HONDA GROM, HONDA GROM, HONDA LEAD125, HONDA NC750X
Bold Grip Strength
Replaced OEMGrip
It is thicker than expected.
Also, the Grip is stronger.
So it is a very firm grip.
Since it is Closed End, you have to open a hole when you use Bar end mirror etc. ….
I'm having a hard time where I bought it ….
The way I installed it was not Smooth and I got a little beat up!
View detail
Fits: SUZUKI GSX-R750M, SUZUKI GSX-R750, SUZUKI GSX-R750SPR, SUZUKI GSX-R750J, SUZUKI INTRUDERClassic800, SUZUKI RF900R, SUZUKI TL1000S, SUZUKI TL1000R, SUZUKI DL1000DL1000 V-STROMXT, SUZUKI DL1000DL1000 V-STROM, SUZUKI SV1000S, SUZUKI SV1000, SUZUKI GSX-S1000F, SUZUKI BANDIT1250S, SUZUKI BANDIT1250F, SUZUKI BANDIT1250, SUZUKI B-KING, SUZUKI GSX1300 GSX1300R HAYABUSA, SUZUKI GSX1400, YAMAHA XMAX300
Installation of Internal Pressure Control Valve on SAVAGE 650
Used to install an Internal Pressure Control Valve on the oil supply port of a Savage 650.
No problem, it works!
View detail
Fits: KAWASAKI NINJA400, KAWASAKI NINJA650, YAMAHA CYGNUS X, YAMAHA CYGNUS X SR, YAMAHA DRAGSTAR250, YAMAHA YZFR3, YAMAHA YZF-R25, YAMAHA YZ65, YAMAHA YZ80, YAMAHA YZ85, YAMAHA YZ450FX, YAMAHA YZ250X, YAMAHA YZ426F, YAMAHA YZ250F, YAMAHA MAJESTY, YAMAHA YZ450F, YAMAHA YZ250FX, YAMAHA YZ125X, YAMAHA YZ250, YAMAHA XT250
It's warm
[How is it used?
I installed it on my YBR125 commuter vehicle.
Was the one you received as per Image?
I have used KIJIMA's Grip heater before.
I have installed it before and it was just like the Image.
How was your experience with it?
A must for winter Motorcycle commuting.
The switch is separate, so there are no mistakes in pressing.
[Points to note]
I get nervous when installing Grip.
How did it compare to other products?
Cost performance, good warmth, and where Repair Parts is available,
Manufacturer for Peace of Mind
View detail
Fits: SUZUKI GSX-R750, HONDA CBR600RA, HONDA CBR300R, HONDA CBR250RR, HONDA CBR250R, HONDA CBR1100XX, HONDA CBR1000RR-R, HONDA RVT1000R, HONDA NC750XD, HONDA NC750X, HONDA Monkey125, HONDA GROM, HONDA FORZASi, HONDA CTX700ND, HONDA CTX700D, HONDA CTX700, HONDA CBR600RR, YAMAHA FZ6R, HONDA CB500F, HONDA CB500FA
When I put the Switch in, it goes around in circles.
I often buy Webike products, but this product was installed by a dealer when I bought my Motorcycle, so I wasn't sure if I should write about my impressions, but I don't know if I am the only one who has this problem, so I decided to write about it.
The first one was a Harley 883Iron, purchased new in the spring of 2021. At that time, I knew very well that OEM was the way to go, but due to the price, I had this product from KIJIMA installed before the Harley was delivered. The first winter after that, I was using it comfortably with the switch in the warmest red color, but the adhesive on both Axel side and LeftClutch side started to melt as it got warmer, and the grips started to turn. But the next winter, the grips still rotate when I turn on the switch. Also, the grips rotate even under the hot sun in summer. Is the adhesive bad, is the installation method bad, or is the structure of the Grip bad? It is still the same.
The second one was a used CB400SB in the winter of 2023. In that case, I had this KIJIMA Grip heater, exactly the same as Harley's, installed at the dealer where I bought it, in return for a discount. I was using it with good mood for about that winter, but in the next winter, the Grip turned around as if the adhesive was melted as same as Harley.
I don't know if the installation method for both of them is poor or not, but it seems that the adhesive on the grips melts as it warms up.
I didn't ask what kind of adhesive you are using, but I am very disappointed about that. Does anyone know of a strong adhesive?
View detail
Fits: YAMAHA BirdCity 300, YAMAHA MAJESTY 250, YAMAHA MAJESTY 250, YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA MAJESTY 250, YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA SEROW250S, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA YZ250F, YAMAHA XT250X
Necessary and sufficient.
I replaced it with this product at 100, 500km and I don't think it is inferior to the OEM product. I think that the BALI and iron powder inside the engine assembly was almost completely removed after 100km. The oil residue left at the bottom of the Element booth was not contaminated with iron powder.
The manual recommends replacing the oil and element every 9000 km, but I will replace the oil and element with the O-ring at 5000 km next time, and every 5000 km after that. This motorcycle is fun to run with the engine revving up and the VVA working, so I would like to change the Oil and Element more often.
View detail
Fits: Others , HONDA glom, HONDA CB125R, HONDA XR230, HONDA XR250MOTARD, HONDA VTR250, HONDA NIGHTHAWK250, HONDA VT250 SPADA, HONDA CB250F, HONDA CB250R, HONDA CRM250AR, HONDA CRF250RALLY50, HONDA CRF300L, HONDA CB400F, HONDA CB400SF, HONDA 400X, HONDA NC700S, HONDA NC700X, HONDA PCX, HONDA FUSION
Parenthesis sounds great!
I like the look of Parenthesis! The texture is so-so, but it's easy to read! I am satisfied with the price! View detail
Fits: HONDA ZOOMER(Ruckus), YAMAHA GEAR(4ST), YAMAHA 4ST VINOSA37J, YAMAHA 4ST VINOSA26J, YAMAHA 4ST JOG(SA36-39J)ZR, HONDA CREA SCOOPY, HONDA Byte, HONDA PCX150, HONDA PCX125, HONDA NSR80, HONDA NSR50, YAMAHA 4ST JOG(CE50)ZR, YAMAHA 4ST JOG(SA36-39J), YAMAHA XMAX300, YAMAHA NMAX155, YAMAHA NMAX125 , YAMAHA TMAX530, YAMAHA TMAX500, YAMAHA MAJESTYS, YAMAHA MAJESTY125
MAJESTY2504hc did not come with it….
I bought this cap to replace an OEM cap that had deteriorated, but unfortunately…it didn't fit on my MAJESTY250 4hc3 Radiator cap. I should have checked carefully before buying it. View detail
Fits: HONDA SH125, HONDA NX250, HONDA XR650L, HONDA LEAD125, HONDA XR250L, HONDA CBR900RE, HONDA DIO110, HONDA CRF230M, HONDA CBR900RR, HONDA CRF230L, HONDA CB900F, KAWASAKI Z1000, HONDA CB600F, HONDA CB1300 SUPER FOUR, HONDA Spacy110, YAMAHA YZF-R3, YAMAHA XMAX300, YAMAHA NMAX155, HONDA Forza300, HONDA CB150R
It is very warm!
I had it installed and rode around town for about 2 hours in January at an outside temperature of 7°C. It was very warm. I think I can ride safely in winter now. View detail