Reviews
Fits: HONDA CD250U, HONDA CRF50F, HONDA CRF70F, HONDA XR50R, HONDA XR50 MOTARD, HONDA XR70R, HONDA Z50R, HONDA APE, HONDA APE, HONDA APE, HONDA GORILLA, HONDA JAZZ, HONDA GIORCUB, HONDA SPACY100, HONDA SUPER CUB70, HONDA SUPER CUB70Super deluxe, HONDA SUPER CUB 90, HONDA SUPER CUB 90Super deluxe, HONDA solo, HONDA DAX
Replace with Manufacturer recommendation
Since it is a consumable item, it is replaced at the Manufacture's recommendation.
Prices have gone up, but they are inexpensive, so don't be stingy.
Still, I think it is a cosmetic component given its quality.
In my case, the three cars I own (one for my son) are the same Plug.
We always Stock more than a multiple of 3.
View detail
Fits: HONDA CD250U, HONDA CRF50F, HONDA CRF70F, HONDA XR50R, HONDA XR50 MOTARD, HONDA XR70R, HONDA Z50R, HONDA APE, HONDA APE, HONDA APE, HONDA GORILLA, HONDA JAZZ, HONDA GIORCUB, HONDA SPACY100, HONDA SUPER CUB70, HONDA SUPER CUB70Super deluxe, HONDA SUPER CUB 90, HONDA SUPER CUB 90Super deluxe, HONDA solo, HONDA DAX
NGKPlug for safety and security
Installed on a Z125pro.
Standard Plug BP5HA from NGK for safety and security.
Luxury Plugs vary, but I bought a used car,
At first I replaced it with Standard Plug BP5HA.
It costs quite a lot to replace a high-end Plug with a high frequency.
Maybe it is better to replace the Standard Plug BP5HA more often than expected?
It would be best to replace high-end plugs at such a high frequency that only the most delicious parts can be used.
The construction is solid and the Screw Mount is nicely dug out.
It goes on easily.
Simply pull out the Plug cord and remove and replace the Plug by turning it with a 16mm Wrench (or an automotive tool).
If you have a plug wrench, you can easily replace the plug, so if you do it as a DIY project for a single cylinder, you can get a new plug for about 350 yen and feel good about it.
I don't think there will be any particular problem with the installation of the plug if only the torque of tightening is taken care of.
The back of the plug box also indicates the Torque and rotation angle for tightening, so be sure to observe them.
Tighten it as far as you can by hand, then tighten it 1/6 degree with a wrench, etc. The box is marked so you don't need a torque wrench to install.
In general, NGKStandard Plug BP5HA, which is inexpensive and of solid quality, is a Recommendation.
NGKPlug's Rank is Standard, Windshield IRIDIUM, and DX, in that order.
* Before the replacement, NGK DXPlug (high-end Plug) was attached,
Starting performance was better with the new standard.
View detail
Fits: PGO i ME 125, PGO i Bubu 125, PGO X-Hot 125, PGO X-Hot 150, PGO T-REX 125, PGO T-REX 125, PGO My Bubu 100, PGO Bubu 125, KAWASAKI Z200, PGO Bubu 100, KAWASAKI KS125, KAWASAKI KE125, KAWASAKI Epsilon 150, HYOSUNG XRX 125 Enduro, HYOSUNG RX 125, HYOSUNG RT125 Karion, HYOSUNG GV125 Aquilia, HONDA DF200E, SUZUKI XS200E, SUZUKI Volty Type T
For TS125 HUSTLER
Used on Front of 1977TS125 HUSTLER
The effectiveness is on par with NORMAL.
View detail
Fits: HONDA CL50, HONDA CL50, HONDA BENLY50CD50, HONDA BENLY50CD50, HONDA VOCAL, HONDA CRF70F, HONDA BENLY50CD90, HONDA BENLY50CD70K, HONDA BENLY50CD50SP, HONDA SUPER CUB 90, HONDA SUPER CUB 50DELUXE, HONDA SUPER CUB 50Standard, HONDA SUPER CUB 50Super custom, HONDA SUPER CUB 50ST, HONDA SUPER CUB 50DX, HONDA SUPER CUB 50, HONDA GIORCUB, HONDA JAZZ, HONDA Z50R, HONDA XR50R
Effective. Just ….
I used to think that the Normal plug would be sufficient, but I thought that the Engine Displacement Volume would be more effective for older motorcycles with small engine displacement volume. I decided to replace the plug with a Normal plug.
The ignition system on the '87 SUPER CUB is connected to an OEM IGCoil with their Power cable as well as a MotoDXPlug, the Carburetor is Overhaul in advance, the Air Filter was replaced with a new OEM one, and the Engine oil viscosity is running at 10w-30.
After verifying the results from summer to winter, the starting performance improved and the engine was able to start with one KICK. Particularly noticeable change was in the winter when the temperature was low and the engine had to be kicked many times when the temperature dropped below 5°C. After the replacement, the engine can be started with only one kick, just as it was in the summer. Idling afterwards also became stable without Stall, even when stopping at a traffic light. However, it is not always possible to start the car in one shot if it has not been running for several weeks.
Power and Response seems to have increased slightly, Axel response is good, and the Rear tire seems to have a stronger kick out ….
On a sub-zero day, I changed to the Normal plug again for comparison … At first, the engine was able to start with one KICK, but the engine sound was not energetic. After that, I tried driving for a while, but every time I stopped, the Idling was not stable or the RPM was low, and when waiting at a traffic light, the engine stalled several times. When the temperature exceeded 5°C and the oil temperature reached 50°C, the engine finally stabilized.
Power is thinner than in MotoDX and Response is not as responsive as I would have liked.
Although there was certainly a change in startability, Power, Responseetc. by replacing the Normal plug, we recommend replacing it when you can afford the Gold, since the price is about 4.6 times higher than the Normal plug, so it is not generally a good idea to replace the Normal plug.
View detail
Fits: GASGAS TX RANDONNE, HONDA 125T MASTER CUSTOM, HONDA 250T MASTER/LA CUSTOM, HONDA APE/DX(FI), HONDA APE/SPECIAL/DX, HONDA APE100/DX, HONDA ATC70(TRIKE), HONDA BENLY (CD50), HONDA BENLY (CD50S/SP), HONDA BENLY (CL50), HONDA BENLY CD125T, HONDA BENLY CD125T, HONDA BENLY CD90S, HONDA BENLY CD90, HONDA BENLY CD90, HONDA BENLY(CD70K), HONDA CB125T, HONDA CB50S, HONDA CD250u, HONDA CHALY(CF50)
The physical effect is thin, but the ignition enhancement is effective!
[How is it used?
I purchased this product with enhanced ignition because a little bit of NORMAL NGKPlug during jetting would cause extremely poor Engine starting.
Was the one you received as per Image?
It was a beautiful Plug that was built better than Image.
Was the installation difficult?
If you have a plug wrench, you can easily replace it. Although it can be installed with an on-board tool, Torque control is necessary because the screwed-in part will be chipped and the engine will be ruined if the tool is tightened with excessive force.
How was your experience with it?
I felt that the starting performance has improved. Normally, there is no problem with NORMAL, but during jetting, I often felt impatient because the engine would not start with the Normal plug if it was covered, but this is no longer the case. However, it may simply be that the jetting is getting better.
[Included Parts:were they on?
Adapter was attached to the tip.
[Was there anything that disappointed you?
The heat value is very confusing because the digits are different from NGK's, but there is no other way to know.
▼ I get the feeling that NGK is lagging behind in Spark plugs, but I don't think there is that much difference in performance with Iridium plugs.
View detail
![Flame-Resistant Motorcycle Cover [M]](https://img.webike-cdn.net/catalogue/images/102051/IMO9160-04_TS.jpg)
Fits: YAMAHA Newsmate 80, YAMAHA Newsmate 50, YAMAHA Townmate 80, YAMAHA Townmate 50, YAMAHA V80 Mate 80, YAMAHA V80 Mate 50, SUZUKI Birdie 50, HONDA Press Cub 50, HONDA Super Cub 70, YAMAHA champ, SUZUKI Birdie80, SUZUKI RC50, SUZUKI K80, SUZUKI K50, HONDA Super Cub 90, HONDA Super Cub 50, YAMAHA B-Wiz, YAMAHA Axis 90, YAMAHA YSR80, YAMAHA YSR50
Inexpensive and long lasting!
[How is it used?
Motorcycle Covers are easily torn over time and are replaced every few years, and this time we replaced the Motorcycle Cover with a new one as well.
Was the one you received as per Image?
The fabric was thicker and more solid than Image.
How was your experience with it?
We are using M Size for Benly50CD50, but the size feels a little bit Large. Even if all the front and rear wheels are covered, there is still a little ground clearance, but if you attach a rear box, the length will be insufficient.
The thick fabric has Guarded well against wind, rain, and dirt. It is also very durable and has lasted about 5 years.
There are holes on the front and back of the U-shaped lock, but it would have been better to have them only on the front, since it would be difficult to tell the front and back when the cover is applied.
[Points to note]
I often lose track of the front and back; I check the Handlebar bulge every time I use it.
How did it compare to other products?
I think it is great and durable longer than other products. It is totally Large sturdy even after 5 years, whereas other companies started tearing after about 2 years.
I am looking forward to repeat the process, but the replacement Timing has not come yet.
View detail
Fits: HONDA ZOOMER, HONDA LEAD, HONDA PCX, HONDA Dio, HONDA dunk, HONDA Giorno, HONDA TACT, Vespa LX 50, Vespa LX 125, Vespa LX 150, Vespa Prima Beulah 150, APRILIA SR50, KYMCO RACINGS125, KYMCO GP125i VCBS, Vespa Prima Bella 125, KYMCO GP125i, SYM OvidIII 125, KYMCO RACINGS150, SYM OvidIII 50, KAWASAKI D Tracker 125
A little short?
I put it on my PCX125 and it seems a little short.
I think it is due to the installation of Option's Rear Carrier.
If Option Parts are installed, it may be better to use One sizeLarge Cover.
View detail
Fits: SUZUKI Wolf, SUZUKI RG50, SUZUKI RM50, SUZUKI SEPIA, SUZUKI CM50, SUZUKI GN50, SUZUKI OM50, SUZUKI GS50, SUZUKI Hopper, SUZUKI COLLEDA, SUZUKI GA50, SUZUKI GEMMA, SUZUKI Chance, SUZUKI BIRDIE, SUZUKI CARNA, SUZUKI LETS, YAMAHA YB50, YAMAHA TT-R50, YAMAHA APRIO, SUZUKI Address
Was it something different?
The model is totally different, the power supply connector is different, and it can't be installed.
Am I mistaken?
The search was for the current LETSRegulator and this came up, so I bought it?
View detail
Fits: HONDA CB50JX, HONDA CB50S, HONDA CM125T, HONDA R&P CY50, HONDA XE50, HONDA XE75, HONDA XE75II, HONDA XL50S, HONDA Wave100, HONDA GORILLA, HONDA GORILLA, HONDA CHALYCF50, HONDA CHALYCF70, HONDA SPACY, HONDA SPACY80, HONDA SUPER CUB 50, HONDA SUPER CUB 50DX, HONDA SUPER CUB 50ST, HONDA SUPER CUB 50Super custom, HONDA SUPER CUB C50
Genuine NGK Spark Plug for various small bikes as spares
I rarely run out of stock spark plugs but for some reason I had a few small older bikes come in a 1 of those required this particular spark plug. Not an issue, I will just get a couple from Webike. The cost from Webike was perfect and better than I could find elsewhere. The order with a few other parts was shipped using EMS and because I combined more than one item, the cost was very good. All my order arrived in 5 days from shipping. The spark plug came in it's regular NGK box and was also inside a made up bubble wrap packet for security. The plugs arrived in perfect condition. After testing them, the specifications were spot on. Absolutely over the moon with this purchase.Great plug, great NGK product, thanks Webike. View detail
Fits: HONDA CB125, HONDA CBX125, HONDA DJ-1, HONDA gyro canopy, HONDA TLR200, HONDA Super Cub 50, HONDA Lead 50, HONDA Lead 90, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125
Brighter than OEM
The ThailandJapanese specification of PCX has a different connector shape from JapanSpec. (I made a mistake buying it without knowing it)
I recently replaced them because dusk was falling early and they seemed darker, possibly due to deterioration. They are darker than the HIDs in my car, but definitely brighter than the OEMs I had been using.
View detail
![Incandescent Light Bulb [Head Bulb] T19 P15D25-1](https://img.webike-cdn.net/catalogue/10509/headlight_TS.jpg)
Fits: HONDA CB125, HONDA CBX125, HONDA DJ-1, HONDA gyro canopy, HONDA TLR200, HONDA Super Cub 50, HONDA Lead 50, HONDA Lead 90, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125
1P2014
I have several motorcycles and also have friends with motorcycles. I bought a pair of lamps that are in the greatest demand, do not burn out the base and give a fairly good beam of light. View detail
Fits: KAWASAKI SUPERSHERPA, KAWASAKI SUPERSHERPA, KAWASAKI 250TR, KAWASAKI 250TR, KAWASAKI 250TR, HONDA PRESS CUB 50 DELUXE, HONDA SUPER CUB 50 DELUXE, YAMAHA MAJESTY250 (SG03J) C, Others , YAMAHA YB50, YAMAHA TW225E, YAMAHA SR400 30th Anniversary Limited Editon, YAMAHA SR400, YAMAHA RZ50, YAMAHA MATE90 T90N, YAMAHA MATE90 T90D, YAMAHA JOG Poche, SUZUKI BIRDIE50, SUZUKI BIRDIE50, SUZUKI ZZ
Excellent quality T10 Stanley bulbs!
A1 quality STANLEY 12V 3.4W T10 bulbs! Shipped by EMS and delivered in pristine condition. These now fix and would do years of duty on my motorcycles and Pajero! Thank-you Web!ke for listing/stocking these wonderful bulbs. Recommended store for motorcycle enthusiasts! View detail
Fits: SUZUKI Wolf, SUZUKI RG50, SUZUKI RM50, SUZUKI SEPIA, SUZUKI CM50, SUZUKI GN50, SUZUKI OM50, SUZUKI GS50, SUZUKI Hopper, SUZUKI COLLEDA, SUZUKI GA50, SUZUKI GEMMA, SUZUKI Chance, SUZUKI BIRDIE, SUZUKI CARNA, SUZUKI LETS, YAMAHA YB50, YAMAHA TT-R50, YAMAHA APRIO, SUZUKI Address
Please remove the one that can be used for VANVAN 200.
I understand that it needs to be processed, etc, RV200 VANVAN200 If you are selling this as a FOR JAPAN MODEL product, please make sure that Webike understands and describes this. If it is listed in the product lineup, it should be removed, otherwise, there will be more people like this, so I dare to mention it.
The product itself is solid and can be installed on other vehicles with some modifications. All of this is to point out an error in Webike's description.
View detail
Fits: SUZUKI FB90, HONDA MONKEY RT, SUZUKI FB90, PGO AEveve 125, PGO X Hot 125, KYMCO Agility 50, KAWASAKI NEOMAX95 II, KAWASAKI NEOMAX100, KAWASAKI KSR110, KAWASAKI Z125PRO, KAWASAKI KLX110, KAWASAKI KLX110L, KAWASAKI AV50, HYOSUNG FX110M, HONDA REBELCA250T, HONDA REBEL250, HONDA REBEL SPECIAL Knife, HONDA Monkey Baja, HONDA LITTLE CUB, HONDA MONKEYSP
Compared to DXPlug
Iridium plugs are more powerful than Normal plugs, but their lifespan seems to be about the same.
The MotoDXPlug has a longer life span than the DXPlug, so to be honest, I would use the DX if I had a compatible Plug.
View detail
Fits: HONDA CD250U, HONDA CRF50F, HONDA CRF70F, HONDA XR50R, HONDA XR50 MOTARD, HONDA XR70R, HONDA Z50R, HONDA APE, HONDA APE, HONDA APE, HONDA GORILLA, HONDA JAZZ, HONDA GIORCUB, HONDA SPACY100, HONDA SUPER CUB70, HONDA SUPER CUB70Super deluxe, HONDA SUPER CUB 90, HONDA SUPER CUB 90Super deluxe, HONDA solo, HONDA DAX
Normal plug
Normal plug, but very inexpensive, so I always keep one in stock.
I mainly use these plugs for Carburetor Motorcycles as they are a better match than Iridium plugs.
View detail
Fits: YAMAHA RZ250, SUZUKI COLLEDA 50, SUZUKI WOLF50, SUZUKI GEMMA 50, SUZUKI BIRDIE DX, SUZUKI VERDE, SUZUKI VECSTAR150, SUZUKI VECSTAR125, SUZUKI STREETMAGIC II, SUZUKI SEPIA, SUZUKI RG50, SUZUKI MOLLET, SUZUKI LETS2 , SUZUKI K90SUPER, SUZUKI K50, SUZUKI HI R, SUZUKI GS50, SUZUKI ADDRESSV100 , YAMAHA NewsMATE , YAMAHA MATE90
choice goods
Thank you for your prompt response.
I had installed a commercially available valve for a 50cc, but it was dark and dangerous when driving at night,
I purchased it, and after the replacement installation, the Large change was bright and good.
I look forward to the opportunity to work with you again.
View detail
Fits: HONDA CB125, HONDA CBX125, HONDA DJ-1, HONDA gyro canopy, HONDA TLR200, HONDA Super Cub 50, HONDA Lead 50, HONDA Lead 90, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125
1P2014
After purchasing a Honda Chaly, I needed a replacement lamp in the headlight. I chose this lamp because it has sufficient light and does not burn out the base (which happens with lamps of higher power). Also, these lamps are of good quality and last a long time. I'm pleased with the purchase. View detail
Fits: SUZUKI FB90, HONDA MONKEY RT, SUZUKI FB90, PGO AEveve 125, PGO X Hot 125, KYMCO Agility 50, KAWASAKI NEOMAX95 II, KAWASAKI NEOMAX100, KAWASAKI KSR110, KAWASAKI Z125PRO, KAWASAKI KLX110, KAWASAKI KLX110L, KAWASAKI AV50, HYOSUNG FX110M, HONDA REBELCA250T, HONDA REBEL250, HONDA REBEL SPECIAL Knife, HONDA Monkey Baja, HONDA LITTLE CUB, HONDA MONKEYSP
Upgrade to the extent that you feel comfortable
I tried Iridium plugs to get a good ignition with a good degree of comfort.
To be honest, I don't see much effect on a moped, but I would be happy if it starts better and reduces the load on the Cell Motor.
View detail
Fits: SUZUKI SUSIE, SUZUKI Youdy MINI, SUZUKI High, SUZUKI CHOINORI, SUZUKI BIRDIE, YAMAHA MATE NEWS, YAMAHA MINT, YAMAHA Passola., YAMAHA PASSOL, HONDA HUMMING, HONDA eve PAX, HONDA SUPER CUB, HONDA ZOOMER, YAMAHA MATE, HONDA CUB, HONDA LITTLE CUB
Highly elastic and hard to become WrinkleWrinkle!
If you want to repair your Seat, you can use this product with Rubber instead of Gum Tape! Just pull it off and put it on! It only takes 10 seconds to make your Seat look new again! Easy to install, yet hard to come off the Seat! The quality is good! It is not Vinyl-like, so it is not cheap either! Highly recommended! View detail
Fits: HONDA CL50, HONDA CL50, HONDA BENLY50CD50, HONDA BENLY50CD50, HONDA VOCAL, HONDA CRF70F, HONDA BENLY50CD90, HONDA BENLY50CD70K, HONDA BENLY50CD50SP, HONDA SUPER CUB 90, HONDA SUPER CUB 50DELUXE, HONDA SUPER CUB 50Standard, HONDA SUPER CUB 50Super custom, HONDA SUPER CUB 50ST, HONDA SUPER CUB 50DX, HONDA SUPER CUB 50, HONDA GIORCUB, HONDA JAZZ, HONDA Z50R, HONDA XR50R
Torque up
Used on SUPER CUB 90, felt Torque up overall!
There is one stretch of high RPM.
View detail