Reviews
Fits: HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA Monkey Baja, HONDA MONKEY RT, HONDA MONKEY R, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MOTRA, HONDA MAGNA50, HONDA MAGNA50, HONDA CL50, HONDA BENLY50CD50, HONDA BENLY50CB90, HONDA BENLY90 S, HONDA BENLY50S, HONDA CUB PRESS, HONDA CUB PRESS, HONDA CUB PRESS
Quantity:1 Set of 2pcs. is a great value.
We often have to remove the Exhaust System because we have to unload the Engine from time to time.
I am of the school of thought that Gasket should be replaced every time if possible, but it is expensive, to say the least.
In such cases, the Quantity:This price is very helpful for 1 set of 2pcs.
It is inexpensive, but a well-functioning and capable guy with no exhaust Gas leakage! It's a very cheap price, but it works well and does not leak any gas.
This time, when wrapping the Vantage around the exhaust manifold, we removed it and replaced it with a new one.
View detail
Fits: YAMAHA YZF750SP, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA TT250R RAID, YAMAHA TT250R, YAMAHA MT-09 To Racer, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA FZS1000 FAZER
FZ1FAZERExhaust System used for replacement
[How is it used?
Gasket was replaced when Full Exhaust System Pipe was replaced.
(Quantity:1 Set of 2pcs. so Quantity:2 Set was purchased.
How was your experience with it?
Before replacing the Full Exhaust System Pipe, the old gas gasket was left on the Engine side, so we removed it by prying the gasket with a thousand pieces of paper.
When we tried to install a new Gasket, it would fall off, so we applied a thin layer of heat-resistant Grease or liquid Gasket to the Gasket and stuck it on using it as an adhesive.
Then, the Full Exhaust System Pipe was installed and the Flange nut was tightened to the specified Torque with a Torque wrench.
How did it compare to other products?
OEM Product look at some Other Brand Product because of the higher selling price,
KITACO KITACO Full Exhaust System Gasket (1 Set of 2pcs.)
[Points to note]
Take measures to prevent the Gasket from falling off before installing the Full Exhaust System Pipe.
Tighten the flange nut to the specified torque with a torque wrench to avoid over-tightening the nut, which may cause exhaust leaks.
Other items that would be helpful
Included Parts:presence/absence
None
Items to buy together/
Check the number of Gasket required for each vehicle.
・Service manual
・Box wrench
・Spanner
・Glasses Wrench
Chikyaku-jiro (Pick)
・Radio pliers
Liquid Gasket
Heat-resistant Grease
・Dustcloth
・Parts cleaner
Opinions and requests to Manufacturer
GasketQuantity:1 Set of 2pcs. and they are very helpful in offering it at a low price.
View detail
Fits: YAMAHA YZF750SP, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA TT250R RAID, YAMAHA TT250R, YAMAHA MT-09 To Racer, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA FZS1000 FAZER
reasonably
Purchased to replace the Exhaust System on my XSR900.
One point of concern compared to the OEM Gasket.
Inside BALI.
Considering the price, I think it is reasonable.
4Quantity if you want to be selfish:I would like to have a Set out.
Quantity since it is a 3-cylinder:2pc. Set purchase can be troublesome.
View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
KITACO Exhaust System Gaskets Replacements
This KITACO exhaust gaskets replacements are the best option to use because everytime you take the exhaust out it's always better to replace these. They are not expensive and have the usual KITACO good quality. View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
Necessities when replacing Exhaust System
Exhaust System should be replaced when it is replaced.
It is inexpensive, so it is not that painful an expense.
View detail
Fits: SUZUKI MARAUDER125 (GZ125), SUZUKI BANDIT1250S, SUZUKI BANDIT1250F, SUZUKI BANDIT1250, SUZUKI BANDIT1200, SUZUKI SKYWAVE400 burgman Type S, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman
It's just an ordinary Gasket.
[How is it used?
Exhaust Gasket must be replaced after the Exhaust System is removed.
Exhaust System replaced with a complete Exhaust System in order to put baGOOSESilencer on the Exhaust System of the scale YOSHIMURA.
Exhaust Gasket will be needed if it is replaced.
If you use it in a strange way, the exhaust leaks, and you have to re-install it.
It would be too tight, and the Flange deformation would be too obvious.
I will gladly change the Exhaust Gasket if the Risk can be prevented for a few hundred yen.
It's a consumable product, so it looks like Manufacturer's profit is good.
How was your experience with it?
It's neither good nor bad, but normal.
On the other hand, if the quality is lower than expected, it will not betray you because you will not use it.
However. Every time I think about it, I get annoyed when the Gasket free-falls from the Cylinder every time.
There is a Pattern that attaches after a little sticking with liquid Gasket, but if you don't have it on hand, you just have to fight against free fall.
Since they have been making Gasket for decades, they could make the One Side a Double-sided Tape and make it an Ideas product that won't fall off the Cylinder, but the Manufacturer doesn't seem to be aware of that kind of inconvenience.
How did it compare to other products?
There is no need to compare with other companies, because the quality is usually the same no matter where you buy it.
There is no difference. It is whether it is easy or not.
[Points to note]
Free fall of the Gasket is irritating, so the Exhaust System should be attached after sticking it to the Cylinder a little with the heat resistant Gasket.
View detail
Fits: HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA Monkey Baja, HONDA MONKEY RT, HONDA MONKEY R, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MOTRA, HONDA MAGNA50, HONDA MAGNA50, HONDA CL50, HONDA BENLY50CD50, HONDA BENLY50CB90, HONDA BENLY90 S, HONDA BENLY50S, HONDA CUB PRESS, HONDA CUB PRESS, HONDA CUB PRESS
Necessary when removing/attaching rear wheel
The DREAM50 has a dual exhaust system that requires the removal of the exhaust system when removing the rear wheel.
Since it is not a Level that is exchanged every time, I do not mind the cost of the station Zose Gasket, regardless of the time and effort required to remove and install the Exhaust System.
View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
I am satisfied
I bought it, but I didn't need it, so I thought I wouldn't need it, but since I went through the trouble, I equipped it. View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
It works fine
This was used when replacing the Exhaust System on a vehicle model JK12 MORIWAKI,
No exhaust leakage and can be used as a normal OEM compatible.
View detail
Fits: SUZUKI SKYWAVE650 burgman, SUZUKI GLADIUS650650, SUZUKI GLADIUS650400, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER, SUZUKI WOLF250, SUZUKI WOLF200, SUZUKI WOLF125, SUZUKI DL1000 V-STROM650XT, SUZUKI DL1000 V-STROM650, SUZUKI DL1000 V-STROM650, SUZUKI TS200R, SUZUKI TS125R, SUZUKI SV650S, SUZUKI SV650, SUZUKI SV400, SUZUKI SV400, SUZUKI ST250 E Type
Cheaper than OEM Products
Used for gsx1100sKATANA. View detail
Fits: HONDA BROS650, HONDA BROS400, HONDA NIGHTHAWK750, HONDA STEED600, HONDA STEED400 VSE, HONDA STEED400, HONDA STEED400, HONDA STEED400, HONDA Shadow slasher750, HONDA Shadow slasher400, HONDA Shadow classical400, HONDA SHADOW750, HONDA SHADOW750, HONDA SHADOW750, HONDA SHADOW400, HONDA SHADOW400, HONDA SHADOW400, HONDA XL400VTRANSALP, HONDA XL250, HONDA X4
More affordable than OEM
Used when replacing the exhaust system of the Full Exhaust System,
What I received was as per Image. (Lol) so
Checked for disposal leaks, no problems.
These Parts are consumables, but they are replaced infrequently.
If it is tightened securely and there are no disposal leaks, it is good.
I bought it and used it because I saw on Impression that it was less expensive than OEM and had no problems.
View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
Since the Exhaust System was replaced.
Exhaust System has been replaced, so this is a replacement as a regular wear and tear item.
Since it is a single cylinder, I only needed one Gasket, but the only Gasket sold as a single unit was from a manufacturer without a good Image, so I chose KITACO, even though they sell two.
It is KITACO and I was able to install it without any problems.
It would have been better if you could have sold one…….
View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
I can only say that internal components are good if they fit safely.
I can only say that I am glad that the internal parts such as Gasket and Oil Filteretc. were successfully replaced, but I can trust WeBig's products because I have never had a ha-gap before. View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
Good seals
Good seals, do what they promise, are tight and stable, I can recommend them, they are a good and cheap alternative to the original seals ---------------------------------------------------------- Good seals, do what they promise, are tight and stable, I can recommend them, they are a good and cheap alternative to the original seals Powered by Google Translator View detail
Fits: HONDA BROS650, HONDA BROS400, HONDA NIGHTHAWK750, HONDA STEED600, HONDA STEED400 VSE, HONDA STEED400, HONDA STEED400, HONDA STEED400, HONDA Shadow slasher750, HONDA Shadow slasher400, HONDA Shadow classical400, HONDA SHADOW750, HONDA SHADOW750, HONDA SHADOW750, HONDA SHADOW400, HONDA SHADOW400, HONDA SHADOW400, HONDA XL400VTRANSALP, HONDA XL250, HONDA X4
Gasket
Always replace when installing exhaust pipes View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
It is recommended to always have it on hand.
Familiar parts used in a variety of locations 。
We purchased the Exhaust Gasket, which is something that is often involved in Exhaust System replacement.
What is Gasket?
Gasket
Gasket is an industrial Seal material that fills gaps.
It serves to prevent fluid leakage from the joints and to prevent foreign matter from entering from the outside.
And the Exhaust Gasket we purchased this time.
What is exhaust pipe gasket? Exhaust pipe gasket
Products used for UniversalSmall TypeEngine.
Seal Combustion Gas 。 Gasket that counteracts leakage due to TorqueDown, a drawback of the conventional non-as-VortexType. 。 Since combustion gas is hot, the gasket must also be heat resistant.
→ Prevents exhaust gas leakage and directs the flow of exhaust gas to the exhaust pipe.
And similar and different are Gasket and Packing.
[Difference between Gasket and Packing]
Both Packing and Gasket are used for machine and equipment joints.
Gasket...mainly used for stationary parts (Flange connection, etc.) Gasket can be cut into various shapes according to the shape of the joint and is available in a wide variety of shapes.
→This time, it seems to be the Exhaust System, so here it is. (Exhaust System doesn't work, right?)
*When selecting a Gasket, it is necessary to match the operating environment, material, and application. In the operating environment, it is important to consider the temperature and pressure at which the Gasket will be used.
■Packing ... used for moving surfaces (axial parts such as Valve, Pump, etc.) 。 Packing in general, such as rotation and reciprocation, has an annular shape like O-ring or VRing.
Gasket for the Exhaust System purchased this time,
Its main role is to prevent exhaust leakage.
Basic reuse is not allowed. 。
Since it is done while crushing when adhering and sealing.
By the way, if Exhaust Gasket is not attached and reused, the following problems are observed.
[Malfunction].
Without Gasket, there will be a gap between the Cylinder and the Exhaust System, which will cause exhaust leakage.
So,
The ? exhaust sound becomes LARGE.
? Fuel consumption also worsened.
?Maximum speed also drops. This is especially noticeable when the engine displacement volume is Smallest Motorcycle.
After Fire appears when ?embled and when AxelON→OFF.
Nothing good will come out of it, right? (Laughs)
It's not enough to just put anything on Gasket, but you also need to choose the right one.
Point to choose.
○Fitting Size
If it is too large, it won't fit.
Material
Heat resistance is necessary for areas where heat is applied.
*Chemical resistance to match the fluid (exhaust Gas).
Stable seal performance. Ease of installation and replacement.
Based on the above, it would be an OEM, body-specific product or an external company that has a clearly defined model that is compatible with the vehicle.
I didn't have any problems this time, but I didn't hesitate to buy Gasket and Stock it as insurance in case I get sick in the future.
View detail
Fits: YAMAHA ROYALSTAR1300, YAMAHA ROYALSTAR1300, YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA XT250X, YAMAHA V-MAX 1200, YAMAHA TX650, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400
I don't see it listed in the compatible car models.
Used to replace Exhaust Gasket on DUCATI MHR. I saw that it could be diverted in Minkara or something, and it was very helpful. It is very easy to obtain and I will buy it again. View detail
Fits: YAMAHA YZF750SP, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA TT250R RAID, YAMAHA TT250R, YAMAHA MT-09 To Racer, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA FZS1000 FAZER
Quantity:1 Set of 2pcs.
Purchased for WR250X.
Used for Mega bomb installation at FMF.
I then used it for the installation of NPRO Ject's Full Exhaust System after it had been stored in my tool box for about 5 years and had no problems with it.
It doesn't seem to be ruined that easily, so I think we can keep the excess.
View detail
Fits: HONDA CBX250, HONDA REBEL(-1999), HONDA JADE, HONDA JADE, HONDA XR200, HONDA XLX250, HONDA XL500, HONDA XL400R, HONDA XL250, HONDA XL250, HONDA XL125, HONDA VFR750R, HONDA VFR400R, HONDA VFR400R, HONDA VFR400R, HONDA VF750F, HONDA VF750F, HONDA VF750F, HONDA VF400, HONDA TLR200
KITACO KITACO Exhaust Gasket
During the mid-summer maintenance of the Motorcycle, when the Motorcycle cannot be ridden, TWK Muffler, an aluminum muffler, was purchased as a necessary part to buff out and remove rust from the exhaust pipe. In case you are wondering, there are two TLR200s in this project. View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
NORMAL and Just size
It is NORMAL Gasket and Size exactly and a little thicker. I am satisfied. View detail