Reviews
Fits: HONDA CB250RS, HONDA CB350, HONDA CBF600, HONDA CBR125, HONDA CBR150R, HONDA CBR400F, HONDA CBR600F, HONDA CBR750, HONDA CBX125, HONDA CBX125, HONDA CD250, HONDA CM400, HONDA CX400, HONDA CX500, HONDA GB400, HONDA GB500, HONDA NS250, HONDA NSR150, HONDA NSR150, KAWASAKI Z1000 MkII
Unique BodyDesign Soft and comfortable grip
I replaced the Handlebar on Ape100, so I renewed the Grip as well.
I searched for Grip from Webig's Custom parts, but the number of them was too inflated Large to search Large strange. I looked at all of them, but could not narrow down the search.
So we decided to choose from a selection of products that are compatible with different car models, and we decided to start with something a little different from what is currently on the Handlebar.
The conventional Clip is a little stiff and snaps, but the vibration is directly felt in the hand, so we decided to choose a thicker Soft Type so that the change is easy to understand. ALCAN hands Extreme Grip RCG-004 I decided to
When the product actually arrived and I held it, it was a thick and soft Grip, just as I had imagined from the Impression.
The vibration transmitted to the hand is certainly reduced, which is the opposite of the impression of the previous Grip, and I don't know how to compare it to the Grip. "Fluffy." I feel like I did.
The grip is thicker, so it may not be suitable for those with small hands. It may not be suitable for those with small hands.
Well, in my case, it was a route I purposely targeted for the MinimotoApe100, so I am happy enough.
When used on a motorcycle with a large engine displacement volume, this fluffiness may backfire when pushing and pulling the vehicle.
Since the clips are parts that come into direct contact with the driver during driving, everyone is encouraged to choose the one that best suits their preference.
Spec. Size:R side inner diameter Φ25mm, L side inner diameter Φ22mm Grip Length:131mm Compatible Handlebar:Φfor 22.2mm Handlebar (mainly for domestic cars) Construction:Closed End (Bar End cannot be used) Sponge type (Soft grip)
How to choose a Grip that you may not know. Check these four things and you'll have a large durable Grip!
Grip selection may seem simple, but it is actually quite profound, and can be made easy by checking four items!
How to choose Grip
(1) Measure the diameter of the Handlebar.
? Measure the length of the Grip
(iii) Do you want to add a Bar End?
4) Select by Design and Material
■Measuring the diameter of a handlebar
Use a Caliper or similar tool to measure the diameter of the Pipe portion of the Handlebar.
Generally, 22.2mm handlebar is used, followed by 1inch (25.4mm), which is used for American motorcycle. Some vehicles have a special size, so please check the size of the handlebar first.
■Measuring the length of the grips
Next, check the length of the Grip, which will increase in proportion to the Engine Displacement Volume, but it is best to use the length currently in use as a reference.
If the length is not enough, use Items such as Grip spacer for adjustment.
Do you want to add a Bar End?
Grip has a Penetrating." When Non-Penetrating." There are two types of
If you use Bar End, select Pierced Type; if not, select Non-Penetrating. (Note that removing the Bar End will increase the vibration of the Handlebar.)
■Select by Design and Material
Choose your favorite design based on the above three criteria.
Some grips have a vibration-reducing effect, and I think that material is one way to make a choice.
View detail
Fits: HONDA CB250RS, HONDA CB350, HONDA CBF600, HONDA CBR125, HONDA CBR150R, HONDA CBR400F, HONDA CBR600F, HONDA CBR750, HONDA CBX125, HONDA CBX125, HONDA CD250, HONDA CM400, HONDA CX400, HONDA CX500, HONDA GB400, HONDA GB500, HONDA NS250, HONDA NSR150, HONDA NSR150, KAWASAKI Z1000 MkII
I think it's good.
Plus side : Price is cheap, around (grip) Soft, I think that it is good not to get stiff even in cold weather, individuals with many vibrations.
Minus surface : Grip becomes thick (About Grip heater included) So, for those who are Small in hands, depending on the angle of Handlebar, the thickness increases, Lever and Handlebar (Core of) There is a possibility that the thing may feel distant and it may be difficult to walk around so I think that the evaluation will break up.
Because my FUSION can not adjust the angle for Normal handle, I felt it slightly upward more than to Upright (Feeling holding down from above) became.
Because it is a Scooter which does not hold down even Positionally, the difference of several millimeters is sensuously pretty much Large.
Recommended for those who can adjust Handle position based on the thickness of Grip.
On the other hand, Direct feeling of Handlebar becomes thin, so I feel dull when I turn around.
View detail