Coordinates with front and rear Wheels

[How is it used?
I made SpareWheel of SEROW225 WE used for mountain play, so I ordered MDFOff rim stripe from Webike for Wound hidden&Coordinates with IRC's GP-210 assembled for street riding.
Since the front wheelRim was treated with black anodized finish, we chose red letters on a black base to match the color of the front and rear.
Did you receive the item as per the Image?
I have been using MDFGraphic's Logo since it was the old Type, so the product was just like Image.
Was it difficult to install?
The difficulty level is low, but the so-called "Bothersome" It will be a work in progress.
MDF's website. Spray diluted neutral detergent with a mist, etc. on the wheel rim that has been thoroughly degreased with Parts Cleaner, and apply the Off rim stripe in the order [Plain] [with Logo]. and is clearly posted in text, photos, and video.
As I said above. It's not hard. So, work patiently.
How did you like it?
Once the moisture is gone after application, it adheres firmly to the Rim, and even when washing the car using a high-pressure washer, it adheres well enough that it does not peel off as long as the proper distance is kept.
The three-layered structure of the adhesive, printed, and protective surfaces also makes it somewhat resistant to ultraviolet rays and highly weather resistant.
ColoringVariation is also Red, Green Light, Blue, and Color.:Several patterns are prepared based on yellow, and it corresponds to the importance of the Large size range, and also corresponds to color custom order PRAN. Your own off rim stripe can also be created.
Was "Included Parts:" attached?
Off rim stripe for pasting+Instruction Manual for pasting is included.
First-time users should read the Instruction Manual carefully before working on this project.
Were there any disappointments?
There are no performance problems.
There are many similar products that are less expensive than this product, but there are few products that are simple in design, durable, and weather resistant, and I think they hit the right spot.
Other items that would be helpful
Point and hang of installation
Above. Was it difficult to install? If you practice the method of spraying a diluted neutral detergent and applying it as described in the section "1.", it will take time until the moisture is gone, and if you accidentally touch it during that time, Decal will easily Gap.
If you want to make short work of it, please paste it directly on the inside or outside of the Rim, and you will be able to do it by the time you finish pasting Wheel1 pc (I am a direct pasting without using neutral detergent).
Some car models do not have a flat rim side, so sometimes it can be applied beautifully by applying heat with a dryer (be careful how much heat is applied so that the decal does not stretch too much).
[Availability and clarity of the Instruction Manual
In addition to the included Instruction Manual, MDF's Home page includes images and videos.
If you are not confident after reading the Instruction Manual, please visit the Home page.
[Notes]
As long as the basics of Decal pasting are followed, there are no particular difficulties.
As mentioned above, degrease the Rim thoroughly before working on it. Touching the adhesive surface with dirty hands will reduce the adhesive performance, so wash your hands thoroughly before working on it.
[ITEMS TO BUY TOGETHER
For 4mm or 6mm Rim stripe, MDF sells Gauge for attachment, but this product is not compatible because it is 15mm in diameter.
[Opinions and requests to Manufacturer
If the price is just a little lower, it can be easily used in more vehicles, so please help us out. View detail

In the silver color, since a tire size was also small and the wheel lacked in force, it equipped. The difficulty of the wearing [ itself ] was OK with the feeling which sticks a sticker highly. Since the decal itself has thickness, there are also

In the silver color, since a tire size was also small and the wheel lacked in force, it equipped.
The difficulty of the wearing [ itself ] was OK with the feeling which sticks a sticker highly.
Since the decal itself has thickness, there are also few fears of air bubbles and a wrinkle entering, and if even an attachment location takes care, it can complete finely.
If a front wheel is equipped, does it become a style with a piece?
Although the engine performance of a motorcycle is not raised, I think that it is a high product of the dress-up effect up. View detail

It purchased for appearance. A result is large satisfaction. Since he liked black and blue, the thing of the blue character was chosen as the black material, but since the area of a black material occupied mostly, it was thought that it was not un

It purchased for appearance.
A result is large satisfaction.
Since he liked black and blue, the thing of the blue character was chosen as the black material, but since the area of a black material occupied mostly, it was thought that it was not unexpectedly conspicuous.
(Natural although there are differences of enough if compared with normal ..) Although it thinks that the angle which takes a photograph is also a problem, the impression which is seen rapidly and received is the touch which says that the edge of the tire spread inside.
If appearance was thought more as important, possibly the monochromatic blue product should have been chosen.
Anyway, since it is satisfied with the product itself, I purchase and think that it was good.
However, since this stripe has become comparatively for 4 minutes, the point worried one sticks it, as the portion of a joint overlaps for a while.
(It seems that it is the measure which considered the hit in case of the size of exactly since it is hard to stick by it) If it sticks in the pile and the crevice between joint parts is not processed exactly, garbage will enter from the crevice and it will become a cause of peeling.
Those who are worried will think whether it is satisfactory, if the portion of a joint is cut.
Since I was troublesome, I stuck in piles as it is as the description.
If this point and an edge are separating, I think that it will cut then. View detail

Ideal for Wheel Refresh

I got a used with HubWheel and refresh it.
After all, Rim was a wounded codfish.

I think it is probably Original because the Rim shape was the same as that of XR250.
The OEMRim has a rounded rimSIDE, so the corners may possibly float. I thought it might float, but I decided to use 13mm because of the large area of scratches.

Rear and RimSIDE were too much trouble even for Straight. Therefore, from the beginning, degreasing, washing, wiping and drying with Parts Cleaner, and direct application with Letstry.

The rounded area of the Rim is crimped by holding it with the fingertips and stroking it.
I think it is probably Large sturdy because it doesn't float right away after 30 minutes.
If it doesn't float away when I check it later, good. If not, I'll do it with a slightly stronger Heat gun.
As expected, the scratches look as if the car window film has failed to release air. View detail

The sooner you put it up, the better.

It's not only for dress-up, but also for wheel protection after you buy a new car. It's a great idea to have it on your custom bike. View detail

Let's enjoy with Front and Rear Set.

[How is it used?
Wound prevention of Wheel for mountain play & a little Accent.

Was the one you received as per Image?
It's a quick and easy way to change the look of your foil, as per Image.

How was your experience with it?
Wound and peeling are beginning to appear because I am using it badly in the mountain play, but the purpose is more than enough and the function is fulfilled.

How did it compare to other products?
For Rear18-inches, you can do it with other company's Road motorcycle (for 17-inches), but for Front 21-inches Sticker, it is not sold by other companies, so I think Rival is absent.
Because of the good balance between the thickness of the Decal itself and the adhesive strength of the Seal, you can reapply it right away (if the Decal is too thin or the adhesive strength is too strong, the Decal will stretch or break when you try to reapply it, making it impossible to reuse).

Other items that would be helpful include
Point and hang of installation
It may be difficult to get used to.
The method of spraying diluted detergent on the seal or wheel with a mist spray is easy to position, but it takes time to remove the water because it is unstable until the Gap or water is gone.

[ITEMS TO BUY TOGETHER
Not particularly

[Opinions and requests to Manufacturer
Although the number of domestically produced Dual Par Pass cars is decreasing, please continue to support us. View detail

To the last Rim's Dress-up

First, it is User's opinion that normally runs through forest road with off car.
It is for the protection of Rim that I bought this.

It is not so noticeable if it is scratched by Silver's Rim, but if it is Color of Others, the background will be visible and I will be bothered.

The best thing is to switch on Wheel with On and Off.

However, it is troublesome to desorb often, and as long as we are strolling normally, the switch enters ....

So, I decided to try this item.


Coloring can also match the color of Motorcycle.

You can choose it as you like.


However, since Coloring of each Manufacturer is somewhat sorted out, it will be narrowed down.

Well, it arrived on the fifth day after ordering, but it is thick Cutting.

Of course I firmly do the degreasing of Rim to paste, but I think whether Rim has scratches if you are running so far off.

As I thought the recessed wound was good, I think it would be better to float the part where the BALI appears as if it scratches, by sharpening the water with Sandpaper and making a groundwork.

Pasting only pastes one divided by four.

I worked without removing Wheel from the car body.

It would be easier to remove it.

I pasted it by turning it to a place where it's easy to paste it.



It is a position to paste, but it is a bit thinner than Rim. The groundwork will surely be visible.

The other person is stuck on the inside of Rim as much as possible, I stuck Medium Eyes honestly, but it would be easier to stick it along the inside of Rim.

Paste the end and paste it lightly while wetting the Rim moderately with mist blowing.

The position of Valve should be easy to understand at the beginning of pasting.


The first piece of the first piece is to cover from the top of the fourth piece (One device to be described later) I floated about 3 cm pasted.


After the second one we will paste the ends one on top of the other, but if you try to overlap 18 to 22 mm, the appearance is beautiful.





Even if it is shifted or distorted, if water is on board, you can easily detach it and start over, so do not worry.




As one of the above-mentioned ideas, in order to avoid turning back and forth with respect to the direction of travel, in the case of Right Side, paste the second and subsequent ones into Right and Left Side on Left so that they overlap.

I just pasted it like this because it is personally disgusting.


At this time, if you paste it as it is, it will cover the beginning of the first sticking at the end of the fourth piece, so peel off and put it on.


By doing this, you can paste so that all overlapping faces do not turn against the direction of travel.



However, there is no noticeable thing to worry about so far, so it would be nice to have you put it on as you like.



Although it is long when it is sentences, before and after Quantity : Pair (for Left and Right) It will be over for an hour.



Looks like "Oh! Custom has come!" Approximately, the atmosphere changes.



However, our true aim is not Dress-up but Protection of Wheel.


A week after pasting ....



I thought that the stickiness was familiar, and I went to the garage Dirt somewhat.


I ran without skipping for about 2 hours, but scratching scratches were wonderful!



Oh, you put it neatly!



However, the barely appearance of scratches on the substrate.




And then I ran a galley place several times afterwards.


Scratches that increase as you run, and scratches get bigger and deeper.


Perhaps, it probably arrived at a hard rush hour.


Rear has more scratches than Front.


But!


There is no lifting or peeling of Cutting itself, this is a very strong adhesion!




To expect Protection effect, is it difficult if 2 mm thick?



To the last, it was Dress-up> Protection.



For people on paved road Main, you can change the atmosphere around 5,500 yen around, so it's okay!












View detail

Hang to paste

I tried sticking it to WR as well as RMX.

Thick and firm making is completely different from Rim tape selling at low prices.

Although it is affixing, it is better not to use Brakes cleaner with Alcohol for fuel etc for Wheel degreasing. There is a Cleaner that contains Silicon, although it's a bit.

Rim scratches and dirt clean up with a paper of around 800 th and clean Alcohol → clean with a diluted neutral detergent paste.

Do not forget to wash your hands as oil is on your fingers.

Do not touch the tip too much when peeling from the mount. When the oil of fingers sticks, it will float when overprinted.

Because it will float when stretched and it piles up, it will overlap neatly without floating if you hold it with your fingers while warming up with nature and warming up with Dryer.

It sticks as far as possible from the Rim end. I think that if you paste it on Limit it will hurt when exchanging Tire.

It is easier to remove and paste Tire. Since it uses a diluted detergent, sticking it in a standing position will hang out even where you pasted it all the time and it will be extra work.

The purpose is almost hidden by Rim, but it will change to look like a mistake. I will also change the letters to White when they are scratched and replaced. I do not understand Black character at all in Blue area.. View detail

What's shown in the picture is my CRF250L with MDF Off Rim Stripe (OFFRIM-13M-RDWH-21) o its front rim.How does it look? Isn't it nice?Since I have an OEM aluminum rim, I first thought that it was going to look more shabby, but it's cool!

What's shown in the picture is my CRF250L with MDF Off Rim Stripe (OFFRIM-13M-RDWH-21) o its front rim.
How does it look? Isn't it nice?

Since I have an OEM aluminum rim, I first thought that it was going to look more shabby, but it's cool!

The base is aluminum, but not so bad.

The base color of my CRF-250L is red and white. So I guess this MDF Off Rim Stripe was an excellent choice to put it on the OEM aluminum rim.

The pasting was easy and could be done beautifully. The suspension area now looks cool.

However, I think that many of you think that this MDF Off Rim Stripe is too expensive.

I don't deny that fact, but you can feel the joy and satisfaction of having a cool bike with this part!.

To tell you the truth, I did feel that it was expensive at first.

But once I got it on my bike and take a look at it, I came to feel that the price is actually adequate.
I would like to evaluate this MDF Off Rim Stripe with 10 stars.

Though it is a simple customization, just pasting, I would like to recommend it to others.

It is very important to make your bike look cool, you know!

View detail

Although the Rim stripe of mDf was stuck once, and he also bought that of the Off since it was easy ... It is very difficult to stick well! It resticks repeatedly, it carries out and has stopped almost adhering from the middle.When it had already been pra

Although the Rim stripe of mDf was stuck once, and he also bought that of the Off since it was easy ... It is very difficult to stick well! It resticks repeatedly, it carries out and has stopped almost adhering from the middle.When it had already been practice, it was businesslike, sticking all was finished somehow, and it dried, and ran in a high speed or mud, but it does not decide [ sign / of completely coming off ] not to be believed! What was necessary was just to have stuck more finely, if it was this.Moreover, I think that I will buy it. View detail

It is used in our DR-Z. the about 1000 yen thing which a certain auction etc. may be sufficient as and exists -- rather -- it can do -- saying -- it is . I think that there is value more than a price if it thinks so. Moreover, since it is dece

It is used in our DR-Z.
the about 1000 yen thing which a certain auction etc. may be sufficient as and exists -- rather -- it can do -- saying -- it is .
I think that there is value more than a price if it thinks so.
Moreover, since it is decently finished even if it stretches to a black rim, it is recommended.
Moreover, a manual is intelligible and it is high evaluation also there.
Attachment washes a wheel well and degreasing is certainly important for it.
Please be sure to go before sticking, since it will separate and will become dirty, shortly after neglecting. View detail