A Brand You Can Trust

The hose was previously routed on the outside with a banjo adapter, but this time we changed it to a caliper adapter so that the hose is routed straight. View detail

Refreshing handling was possible.

Black Anodized is Match and Parenthesis is good. View detail

Mounting Space-wise.

I chose Straight's Adapter because the mounting position of the Brembo master is completely different from the OEM. View detail

Banjo is not available in terms of handling.

I really wanted to use a front-end installation, but since I made the Caliper shape and Caliper support myself, I could not use Banjo, so Caliper AdapterType was perfect. View detail

Thank you for the good product.

Thank you for the good product. It is convenient to install as exactly what you need is provided in the correct size. I put a lot of thought into it, but thanks to your products, I have achieved good results. View detail

Used for Master Cylinder

I used it to extend the hose to brembo's Master Cylinder, and although the product name is Caliper Adapter, I was able to install it without a problem.
It is made of strong Stainless Steel for your peace of mind.
Although DAYTONA has released a Pitch 1.25 extended hose, there is no Pitch 1.0 setting, and I was pondering about it, but this solved my problem. View detail

It lived up to my expectations

When I switched from the OEM Brake Caliper to gsx-r's Nisshin 4 pods, I was I couldn't connect it with the existing Banjo adapter, so I used this one to make a direct connection I am very happy with the way it fits in View detail

On straight fitting

Because I changed from Normal caliper that was originally attached to AdvantageNisshin 4 PistonCasting caliper, I purchased it because I needed to stose Hose.
There are no complaints of any problems at present. View detail

The center of Seal washer gaps

As there are other Manufacturers, because the diameter of the Seal washer installation position is thinner than the Screw part, at the time of tightening, the Seal washer Center will gap when you do not tighten Seal washer with your hand. View detail

For BREMBO Caliper.

【What made you decide the purchase?】
Because Brembo caliper is Up from the Caliper of NORMAL because the Fitting section is Up, Brake hose was quite impossible in Banjo.

【How was it actually used?】
Refreshing looks also makes Hose's handling better.

【Was it difficult to install? (Hard parts case)】
I made Stainless Steel in consideration of strength, so it was not easy to install it without much concern.
Pay attention to Caliper's Pitch and purchase.

【Please tell me the point of installation and hang (in the case of Hard parts)】
Although it can be installed without Torque wrench, once it is the most important security part, I think whether you should ask Shop for those who are not confident.
Especially if Aluminum puts too much force, Screw mountain will be cut off, so if it seems to be tightened gradually and leaks, let's tighten up again.
Brake fluid damages paint so prepare water and let's work.
I think that it is better to wash the car after the work is done just in case.

[Is there anything I was disappointed about?]
None.

【Hope for Manufacturer - Please let me know if you have any improvement points]
None.

【Have you compared items?】
None.
[Others] Any item View detail

Direct to MASTER

Use it when you want to connect Hose directly to Caliper without using Banjo. However, I bought it for direct connection to Nisshin's Radial master. Like Caliper, let's notice the difference between Pitch. View detail

Direct to Caliper!

Use it when you want to connect Hose directly to Caliper without using Banjo. Pitch is different by Caliper, so let's be careful. Material : It's Stainless Steel so it's strong enough. View detail

Since decoloring of the anodized made from aluminum was not pleasing, the stainless was chosen. It is simpler and cool to use this adapters at the time of hose exchange, rather than exchanging with a banjo and bolt. It is a recommend.

Since decoloring of the anodized made from aluminum was not pleasing, the stainless was chosen. It is simpler and cool to use this adapters at the time of hose exchange, rather than exchanging with a banjo and bolt. It is a recommend. View detail

Since there was no adapters for bremboes, it purchased. It is strong although it is heavier than the thing of aluminum because of a stainless. Moreover, since there is also no bald of paint application like aluminum, it can turn by a wrench freely

Since there was no adapters for bremboes, it purchased.
It is strong although it is heavier than the thing of aluminum because of a stainless.
Moreover, since there is also no bald of paint application like aluminum, it can turn by a wrench freely. View detail