Reviews
Fits: HONDA CB-1, HONDA CB400FOUR (water-cooled), HONDA CBR400F, HONDA CBR400R, HONDA CBR400RR, HONDA CBR400RR, HONDA CBR600F, HONDA CBR600F, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR750, HONDA CBX400F, HONDA CBX750F, HONDA VT250 SPADA, HONDA VTR250, HONDA VTZ250, HONDA FORZA Si, HONDA FORZA Z, HONDA CB400 SUPER BOL D'OR
Not difficult, but a little cumbersome.
Exhaust system and exhaust pipes are replaced, and the essential gasket is also replaced.
Gasket used at the base of the exhaust pipe.
Incidentally, SUPER FOUR has four cylinders and four Cylinders, so four Gaskets are used.
What is exhaust pipe gasket? Exhaust pipe gasket
Seals combustion gas by using it for Small TypeEngine. 。 Since combustion gas is hot, the gasket must also be heat resistant.
→ Preventing Gas leakage from exhaust gas and making the exhaust gas flow into the exhaust pipe smooth.
Exhaust gasket is supposed to be replaced every time when the exhaust system is replaced, but what if it is not?
What happens if there is no Exhaust Gasket? ]
If not installed, the screw may loosen due to resonance or become a source of abnormal noise. 。
It would be better to install it without side-dressing.
It is extremely unlikely to affect acceleration performance or exhaust efficiency.
Gasket's lifespan]
...Gasket life varies depending on the temperature of the fluid used. 。 Can be used for about 5 to 6 years when using fluids of approximately 30 degrees Celsius or less 。 They deteriorate quickly when using high-temperature fluids and have a life span of 1-2 years.
In this case, an OEM compatible product was used.
I don't think the quality is particularly problematic.
Replacement procedure.
This guy is a huge obstacle when replacing the Exhaust System that allows the Radiator to move.
It is recommended to remove it and work on it.
↓
(2) Remove the Exhaust System.
The Bolt is easy to remove because all you have to do is to remove the Bolt! It is very difficult to reach the bolt that fixes the engine and exhaust pipe because it is located in a very narrow space.
The tool must be a Ratchet and one that can extend the tip!
↓
(iii) Take the old Gasket.
The preparations are a slotted screwdriver, a rubber hammer, and radio pliers.
↓
(4) Put in a new Gasket.
↓
Assemble in the order of ??→? and you are done.
The odd thing about Large is that the location of the Radiator affects Bolt ejection, so it is necessary to shift or remove the Radiator.
View detail
Fits: HONDA SUPER CUB 90, HONDA XL250, HONDA Variety, HONDA Dream 50, HONDA dachshund, HONDA Spacey 50, HONDA Spacey 80, HONDA Journo Clare, HONDA XL250, HONDA charette, HONDA Super Cub 50, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
No problem
This is my first time using a non-OEM Gasket and it works fine. View detail
Fits: HONDA JOKER90, HONDA CABINA 90, HONDA Sh MODE, HONDA LEAD 90, HONDA LEAD 50, HONDA GROM, HONDA CABINA, HONDA PCX150, HONDA PCX125, HONDA G DASH, HONDA DJ-1, HONDA LEAD80, HONDA LEAD125, HONDA BROAD 90, HONDA BROAD, HONDA BEET, HONDA LIVE DIOSR, HONDA DIO (2Cycle), HONDA DIO (2Cycle), HONDA TACT
There's nothing good or bad about this product
It is an Exhaust Gasket, so the closer it is to a new one, the better
I don't think there's anything wrong with it unless it's very shoddy
But the Scooter is more Large strange with the exterior removal
View detail
Fits: HONDA AX-1, HONDA CB750, HONDA X11, HONDA X4, HONDA CB1300 Super Four, HONDA CB1000 SUPER FOUR (Big One), HONDA CB1000 SUPER FOUR (Big One), HONDA FT400, HONDA FT500, HONDA CBR1100XX SUPERBLACKBIRD, HONDA BROS400, HONDA STEED400 VSE, HONDA STEED600, HONDA CBR954RRFire blade, HONDA CBR929RRFire blade, HONDA CBR900RRFire blade, HONDA CBR1100XX SUPERBLACKBIRD, HONDA NIGHTHAWK750, HONDA Shadow slasher750, HONDA XL-DEGREE
Exhaust Gaskets
I purchased ALBA exhaust gaskets and they make a very good quality exhaust gaskets With minimal crush when installed and they keep their shape You could reuse these gaskets 2 to 3 maybe even 4 or 5 times without any worry of having to use new gaskets each time you remove your exhaust system ALBA gaskets seal better than the OEM gaskets from Honda I recommended them to anyone who likes to tinker with their bike regularly or anyone who likes quality products View detail
Fits: HONDA CB-1, HONDA CB400FOUR (water-cooled), HONDA CBR400F, HONDA CBR400R, HONDA CBR400RR, HONDA CBR400RR, HONDA CBR600F, HONDA CBR600F, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR750, HONDA CBX400F, HONDA CBX750F, HONDA VT250 SPADA, HONDA VTR250, HONDA VTZ250, HONDA FORZA Si, HONDA FORZA Z, HONDA CB400 SUPER FOUR
ALBA Exhaust Gaskets
I purchased ALBA exhaust gaskets and they make a very good quality exhaust gaskets With minimal crush when installed and they keep their shape You could reuse these gaskets 2 to 3 maybe even 4 or 5 times without any worry of having to use new gaskets each time you remove your exhaust system ALBA gaskets seal better than the OEM gaskets from Honda I recommended them to anyone who likes to tinker with their bike regularly or anyone who likes quality products View detail
Fits: HONDA CBR250R (MC17/19), HONDA CBR250R (MC17/19), HONDA CBX250RS, HONDA CBX250RS, HONDA CBX250, HONDA GB500, HONDA NX125, HONDA TL125(TLR125), HONDA TLR200, HONDA VF400, HONDA VF750F, HONDA VFR400R, HONDA VFR400R, HONDA VFR400K/Z, HONDA VFR750R, HONDA XL125, HONDA XL250, HONDA CB125, HONDA CB125, HONDA CB125T
Satisfied with with quality of the product. look and feel like OEM. Works well and seal all the exhaust leaks. If you are shipping to Sri Lanka tax have to be payed and have to wait extra date's for processing from post office. But overall very fas
Satisfied with with quality of the product. look and feel like OEM. Works well and seal all the exhaust leaks. If you are shipping to Sri Lanka tax have to be payed and have to wait extra date's for processing from post office. But overall very fast delivery. Only took 1 week and 4 day to receive product from day of ordering. For 91 Jade cb250f mc23 View detail
Fits: HONDA AX-1, HONDA CB750, HONDA X11, HONDA X4, HONDA CB1300 Super Four, HONDA CB1000 SUPER FOUR (Big One), HONDA CB1000 SUPER FOUR (Big One), HONDA FT400, HONDA FT500, HONDA CBR1100XX SUPERBLACKBIRD, HONDA BROS400, HONDA STEED400 VSE, HONDA STEED600, HONDA CBR954RRFire blade, HONDA CBR929RRFire blade, HONDA CBR900RRFire blade, HONDA CBR1100XX SUPERBLACKBIRD, HONDA NIGHTHAWK750, HONDA Shadow slasher750, HONDA XL-DEGREE
Good Cost performance.
A year ago I got my driver's license and purchased Motorcycle and used it for the first exchange of Exhaust System.
Even amateurs can use it very easily.
Cost performance is good.
View detail
Fits: KAWASAKI ZZR1100/ZX-11, KAWASAKI ZX-9R, KAWASAKI ZX-12R, KAWASAKI ZRX1100II, KAWASAKI ZRX1100, KAWASAKI W650, KAWASAKI KLE400, KAWASAKI GPZ900R, KAWASAKI GPZ1100, KAWASAKI Vulcan 400, KAWASAKI EX-4, KAWASAKI GPZ750R, KAWASAKI GPZ1000RX
Purchased together when purchasing Exhaust System
As we ordered the Exhaust System, we needed it together
I bought it referring to the fitness condition of the model and various reviews of the site. When I actually exchanged, I felt relieved because there was no gap and fitted tightly. After installation, I run about 5000 km, exhaust leak etc etc. There is not so far ♪ I also want to use it when exhaust system is replaced.
View detail
Fits: HONDA CBR250R (MC17/19), HONDA CBX250RS, HONDA CBR250R (MC17/19), HONDA XL250, HONDA XL125, HONDA VFR750R, HONDA VFR400K/Z, HONDA VFR400R, HONDA VFR400R, HONDA VF750F, HONDA VF400, HONDA TLR200, HONDA TL125(TLR125), HONDA NX125, HONDA GB500, HONDA CBX250, HONDA CBX250RS, HONDA CB125, HONDA CB125, HONDA XR200
I am in the conformity table, but ...
It is written in a conformity table like CD90AllMODEL but it seems like Large Ki Size on my CD 90 ... Although it does not seem to be a problem for the time being without Gasket,. View detail
Fits: YAMAHA TRY, YAMAHA Excel, YAMAHA AXIS 90, YAMAHA GEAR, YAMAHA GEAR, YAMAHA AXIS 50, YAMAHA CHAMP, YAMAHA CHAMP, YAMAHA CHAMP, YAMAHA GRAND AXIS, YAMAHA AXIS 90, YAMAHA JOG SPORTS, YAMAHA boksun, YAMAHA Vino (2-stroke), YAMAHA Super Jog Z, YAMAHA jogpochet, YAMAHA jog sports, YAMAHA gear, YAMAHA BWS (Bewith), YAMAHA BWS (Bewith)
For inventory
Purchased for Exhaust Gasket for GRAND AXIS 100. I exchanged the Exhaust System a little while ago and used a different Gasket so I will use it the next time I exchange it. Since it is a consumable item, it is convenient to stock some pieces. View detail
Fits: SUZUKI LOVE, SUZUKI minicross, SUZUKI Hi., SUZUKI khana, SUZUKI Verde., SUZUKI zzz, SUZUKI bean-curd, SUZUKI GS250FW, SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI street magic, SUZUKI TS50 Hustler, SUZUKI RG50, SUZUKI GN50E
[Webike Monitor] There was also no exhaust leakage and it was satisfactory. It is recommended.
[Webike Monitor] There was also no
exhaust leakage and it was satisfactory.
It is recommended.
View detail
Fits: HONDA SUPER CUB 90, HONDA XL250, HONDA Variety, HONDA Dream 50, HONDA dachshund, HONDA Spacey 50, HONDA Spacey 80, HONDA Journo Clare, HONDA XL250, HONDA charette, HONDA Super Cub 50, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Are they necessaries for those who exchange a Muffler frequently? For me, it is one of the Stock articles.
Are they necessaries for those who exchange a Muffler frequently? For me, it is one of the Stock articles. View detail
Fits: HONDA NX125, HONDA GB500, HONDA XL250, HONDA XL125, HONDA CBX250, HONDA CBX250RS, HONDA CBX250RS, HONDA CBR250R (MC17/19), HONDA CBR250R (MC17/19), HONDA VFR750R, HONDA VFR400K/Z, HONDA VFR400R, HONDA TL125(TLR125), HONDA VFR400R, HONDA VF750F, HONDA TLR200, HONDA VF400, HONDA GB500, HONDA GB400, HONDA XR200
The diameter of the Gasket was large and it did not enter (CD90 HA03).
The diameter of the Gasket was large and it did not enter (CD90 HA03). View detail
Fits: HONDA CBR250R (MC17/19), HONDA CBR250R (MC17/19), HONDA CBX250RS, HONDA CBX250RS, HONDA CBX250, HONDA GB500, HONDA NX125, HONDA TL125(TLR125), HONDA TLR200, HONDA VF400, HONDA VF750F, HONDA VFR400R, HONDA VFR400R, HONDA VFR400K/Z, HONDA VFR750R, HONDA XL125, HONDA XL250, HONDA CB125, HONDA CB125, HONDA CB125T
The diameter is about 4 cm and it was not able to use.
The diameter is about 4 cm and it was not able to use. View detail
Fits: KAWASAKI ZXR400R, KAWASAKI ZXR400R, KAWASAKI ZR-7/S, KAWASAKI ELIMINATOR 400, KAWASAKI ELIMINATOR 400, KAWASAKI ELIMINATOR 400, KAWASAKI ZZR250, KAWASAKI Zephyr X, KAWASAKI Zephyr 750, KAWASAKI Estrella RS Custom, KAWASAKI Zephyr 750RS, KAWASAKI KLE250 Anaero, KAWASAKI Australia, New Zealand and the United States, KAWASAKI ZXR400, KAWASAKI Eliminator 125, KAWASAKI Estrella., KAWASAKI Estrella RS, KAWASAKI GPZ250R, KAWASAKI GPZ250, KAWASAKI Eliminator 250LX
He thought that he would overhaul a Muffler since it rode on the Eliminator and about four year has passed, and it purchased. Since it is the structure which the Muffler itself is pure and cannot be taken into pieces, only an Exhaust pipe will be carried
He thought that he would overhaul a Muffler since it rode on the Eliminator and about four year has passed, and it purchased. Since it is the structure which the Muffler itself is pure and cannot be taken into pieces, only an Exhaust pipe will be carried out. When equipping, this was required, and in particular after wearing did not have a problem, either. Since it is entering two piece, a profitable feeling may suit. View detail
Fits: HONDA XL250, HONDA SUPER CUB 90, HONDA Journo Clare, HONDA charette, HONDA XL250, HONDA Variety, HONDA Dream 50, HONDA dachshund, HONDA Spacey 50, HONDA Spacey 80, HONDA Super Cub 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
It is ordinarily crushed by ordinary power. being not too bad -- when the gasket was pinched [ whether whose attachment part was / the muffler which I bought / thick, and ], the die length of the bolt was lacking. It is a problem by the side of a
It is ordinarily crushed by ordinary power.
being not too bad -- when the gasket was pinched [ whether whose attachment part was / the muffler which I bought / thick, and ], the die length of the bolt was lacking.
It is a problem by the side of a muffler to the last.
It is safer to carry out new article exchange, when it removes.
View detail
Fits: HONDA AX-1, HONDA CB750, HONDA X11, HONDA X4, HONDA CB1000 SUPER FOUR (Big One), HONDA CB1000 SUPER FOUR (Big One), HONDA CB1300 Super Four, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR900RRFire blade, HONDA CBR929RRFire blade, HONDA CBR954RRFire blade, HONDA NIGHTHAWK750, HONDA VRX400 R100 ROADSTER, HONDA XL-DEGREE, HONDA XL400VTRANSALP, HONDA SHADOW400
There was no problem in particular similarly pure [ quality ]. I am not a number odd ten pieces. Since expectation is put as supposing this voice reaches Mr. Manufacturer and there is a statement of an adaptation vehicle type, don't I have it used ent
There was no problem in particular similarly pure [ quality ].
I am not a number odd ten pieces. Since expectation is put as supposing this voice reaches Mr. Manufacturer and there is a statement of an adaptation vehicle type, don't I have it used entering eight piece or to enter 12 piece?
View detail