Reviews
Fits: HONDA MSX125, HONDA MSX125, HONDA MSX125, HONDA glom, HONDA glom, HONDA glom
JC92 should be Straight for Rubber pipe.
With JC61/JC75, I think that Pipe's Curve is an Exact fit, but with JC92, I think Straight is definitely the way to go.
The JC92 was made to be very tight in that area, and it was quite difficult for me, who has big hands, to put it on.
The plastic look is undeniable, but it is not so noticeable because the JC92 and the JC92 are tucked inside.
The only thing I can think of after installing it is that it clearly reduces the effectiveness of the embellishments. This is clearly evident. Also, the fuel consumption, which used to be less than 60 kilometers, is now easily 60 kilometers. This is not so reliable, though, because the distance driven is short.
I'll give it a 3 for durability since not much time has passed since it was installed.
View detail
More than I expected
Although I did not rely on it much, I could clearly see the difference in the effect of engine braking.
If only the texture of the Material were a little better!
View detail
Fits: HONDA MSX125, HONDA MSX125, HONDA MSX125, HONDA glom, HONDA glom, HONDA glom
Cost-effectiveness is good, looks...
Believing the Net articles and Reviews, I bought it in the hope that it would alleviate the overly effective Engine braking of the Groms, improve Response, and increase fuel economy.
This is a review based on my feeling after installation.
I could feel the engine braking immediately after installation.
As for Response, I think it is the Brush-bo effect.
The feeling of commuting and city driving will not change, but it may change if you do circuit driving etc.
I did not notice any change in fuel consumption.
As for the installation, it took only about 5 minutes.
There were some Review and Net articles about the narrowness and difficulty of installing the Horse & Hose Band, etc....
As you say, it looks so much like a product of a famous CustomManufacturer that it is hard to believe that it is a product of a famous CustomManufacturer. Cheap Milk White Plastic The cheap Internal Pressure Control Valve made by Large Land with aluminum body is better.
Material I had at home.:Wrapped with Carbon Style's WrappingSeat.
View detail
You'll feel better acceleration, but the embracing will not work.
[How is it used?
Commuter Main
Was the one you received as per Image?
Yes
Was the installation difficult?
it's simple
However, the included instruction manual is WhiteBlack and halfway detailed, so it is difficult to find the orientation.
Also, the arrows were reversed.
When in doubt, try breathing in and out. (Mouth) is the Engine side.
How was your experience with it?
As others have said, the Response and acceleration feel is something better.
Embellishments will not work lol.
For those who use a lot of embellishments, it will be weird until you get used to it.
It is not suitable for driving on a mountain pass or something like that because the embellishments will not work as well.
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Easy to ride with reduced embrittlement.
I wanted to make the white color less noticeable on a matte black car body, so I applied Carbon Seat that I had at home.
Easy to install, effective and affordable.
Periodic cleaning is necessary.
View detail
Expect ResponseUP!
I bought a Z125pro and due to snowfall in Hokkaido, my car hibernated before I could ride on public roads. I installed it because it was highly rated in everyone's Impression. I don't know how it compares to the other ones, but I'm looking forward to the next season! View detail
Fits: HONDA MSX125, HONDA MSX125, HONDA MSX125, HONDA glom, HONDA glom, HONDA glom
Not sure how to install the item please help
Picture 2 (from winrus) that was also poorly printed and added to the package show the valve been mounted with the wire ring and round edge towards the engine. The other (user) pictures show the white ring the other way around. with the white part facing the other way. View detail
Fits: HONDA byte, HONDA byte, HONDA byte, HONDA ZOOMER, HONDA ZOOMER, HONDA ZOOMER
Easier to run.
Installed on Byte. The work took less than 10 minutes.
The engine noise became quieter and acceleration smoother, and although the difference was minimal for a 50cc engine, the effect was clearly noticeable.
Although the engine braking is weakened due to the structure, it is not so much that it is dangerous, but rather that the feeling of falling forward due to the Axeloff is reduced, making it easier to ride.
I would highly recommend it to all ZOOMER drivers who share the same vehicle body.
View detail
Mounting orientation
I installed it on my VOX.
Engine braking reduction cannot be experienced unless the speed is fast.
When the Axel is returned, the effect of engine braking is weakened.
There seems to be an improvement in fuel economy, but I have not experienced it yet.
Startability is better.
Installation can only be done by removing the cowl, but the tool is large and sturdy, using only a Phillips screwdriver.
View detail
Excellent anti-embrittlement measures.
I had heard it was good, but I didn't realize how much it would change….
However, MaintenanceCycle is exploring
View detail
Fits: HONDA MSX125, HONDA MSX125, HONDA MSX125, HONDA glom, HONDA glom, HONDA glom
this is astonishing
Product Name
Hyper Bulb
Item Number
W-825-6970
Vehicles
Grom (JC61)
Number of man-hours
About 30 minutes
Required Tools
Torque wrench, hexagon socket, Hexagon socket, -Driver, Pliers system,
Why did you choose this product?
I bought it because it was recommended to me by an acquaintance who is a Grom rider. I wondered if it was true because there were many effects that I had researched, but my interest was piqued and I decided to purchase it.
Was the one you received as per Image?
It was exactly as shown in the Image. It is a bit larger than I expected.
Was the installation difficult?
Installation was difficult. It took a long time because I had to install it around the small wiring area and the tools did not fit as well as I would have liked. I think it would be better not to cut the original rubber wire in case this product breaks.
How was your experience with it?
Emboiling has been reduced. Also, the fuel economy has improved a bit. From a commuter's point of view, I am very happy. It will take some time to get used to it at first because the embolement will be weakened. However, I was surprised that the ride quality changed so much with this smallest component. You should change this. It is not too much of a tool, so anyone can change it. I think you should hurry up to order it now that it is in stock. You can feel the change in the body of the car.
[Included Parts:were they on?
It came with a Sticker and I was satisfied with the high quality feel.
[Was there anything that disappointed you?
It seems that inspection is required, but it is also strange to remove the Large, so I would like it to be made so that inspection, etc. is not necessary.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
The installation effect is certainly there.
1Engine braking fee rings became gentler.
2Reduced deceleration
3Axel opening/closing jittery feeling with the donut has been reduced.
4I feel like there is more extension in the high RPM range.
I feel that the rolling resistance of the Tire is reduced when embracing, and the run and run distance is increased.
The above is the Merit that I felt and installed.
is …
When observing the transparent hose extending from the engine after driving, it can be seen that water droplets are adhering to the inside of the hose, and the moisture from the blowby gas mixes with the oil mist to form an emulsion that clogs the One-Way Valve, making the Valve unable to control the internal pressure, which may destroy the engine. It is also a fact that the One-Way Valve becomes clogged and cannot control the internal pressure that may destroy the Engine.
Also, the water in the valve freezes and the product does not work in the winter;
It's mandatory to clean the Hyper Bulb regularly…
The installation is not self-sufficiency, but self-responsibility, so it is not a product that can be left in place, so those who cannot maintain it themselves should refrain from doing so;
The price is reasonable and the product is very effective.
Not sure about fuel economy.
View detail
this is good
I could feel the effects!
Response up is very clear!
The embellishments were tight, so I put on the Hyper Bulb and then
Mild and easy to drive around town and touring!
If you are not sure, you should put it on.
Parts cleaner inside while replacing the oil.
Cleaning.
View detail
Downshift is a nice touch.
Downshift now has mellow Engine braking. It is good for city driving, and I am glad I installed it when I was touring. I recommend it to other Z125pro riders. View detail
Fits: HONDA MSX125, HONDA MSX125, HONDA MSX125, HONDA glom, HONDA glom, HONDA glom
PCV Valve equivalent
I purchased this since Choinori does not have PCV valve. RPM revs down smoothly when letting off the throttle.About quality and texture Overall I am happy with the purchase. View detail
WirusWin Hyper Valve
About quality and texture I don't know the quality Because it's my first time using this part About the feeling of use I feel less burdened by the engine Products to buy together internal diameter 6 mm rubber hose Difficulty of installation easy, simple Cost performance and comparison with other products I don't know what it'll be like because it's plastic About shipping and packaging Any concerns, cautions, or advice when purchasing Many people said they would use the 115cc engine to reduce the fatigue of the engine, so I bought it and now I just installed it, but I believe it will definitely work View detail
Fits: HONDA MSX125, HONDA MSX125, HONDA MSX125, HONDA glom, HONDA glom, HONDA glom
Top etc. with smooth Engine braking.
I'm glad Engine braking was smooth and up etc. when I put this Valve than OEM.
I extended the Hose and attached it to the back of the Cover in a creative way so that it doesn`t look like it`s behind the Cover.
View detail
I felt the Engine braking reduction!
I bought it because the engine braking was too dominant and difficult to ride in NORMAL.
As per other reviews, Engine braking reduction is certainly a change.
Smooth embracing and easy to handle.
I didn't expect it to be very effective, but it is worth the purchase.
View detail
Fits: HONDA MSX125, HONDA MSX125, HONDA MSX125, HONDA glom, HONDA glom, HONDA glom
JC92 is difficult to install
I installed it on my JC92, but the position of the hose coming out of the engine seems to have been changed and it is quite difficult to do.
I didn't cut the Hose and snaked it to install it, considering Maintenance.
It is true that the engine braking has become milder, and the clunking at low speeds has become less frequent.
View detail
Fits: HONDA MSX125, HONDA MSX125, HONDA MSX125, HONDA glom, HONDA glom, HONDA glom
Gradually after you put it on.
[How is it used?
It is a Touring MainSpec. but I bought it to drive on the mountain.
Was the one you received as per Image?
The product is a good product, solid as Image.
Was the installation difficult?
It was a Manufacturer product and was easy to install.
It was a bit of a pain to remove the Clip!
How was your experience with it?
When I first put it on, I didn't feel much, but...
Gradually, especially at high GEAR, the embrittlement is reduced.
If it's low and reverse - low speed, it's easy to ride.
[Included Parts:were they on?
It came with everything.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail