Reviews
It is easy and convenient to use as a helmet holder.
[How is it used?
Helmet holder is not included in NORMAL, so it was added as an anti-theft measure when touring.
Was the one you received as per Image?
It is more solid Parts than Image.
Was the installation difficult?
The mounting holes are Exactly and accurate, and the Bolt On made installation easy.
How was your experience with it?
It allows you to safely leave the vehicle body when touring.
It would be great if the keys could be integrated with the main key, but I can't complain about the price.
[Included Parts:were they on?
Body, Bolts, and Instruction Manual were included.
[Was there anything that disappointed you?
It has become a bit bulky due to the increase in Key.
I think this is a part that should be integrated with the main key and attached to the OEM's standard equipment, because it is not possible to carry a helmet every time you take a break.
View detail
I plan to change it soon, but ….
Purchased and installed 2 years ago as soon as the car was delivered. It is very easy to use with just a few more keys.
This spring, the suspension will be replaced and a separate tank will be installed at the helmet lock, so it will probably be unusable. If it is not a separate tank, I think it can be used without any problem.
View detail
Stable Products
I recommend it for its quality, ease of use, and ease of installation. View detail
Fits: BMW R1200GS, BMW R1200GSAdventure, BMW R1250GS, BMW R1250GSAdventure
easy install nice fit
Helmets can now be stored with simple installation. I mainly stored the helmet in the existing r1250gs top box. However, storing the helmet was a little difficult when I put other things in the box, but after installing this it became easier Powered by Google Translator View detail
Required.
You can pimp it
It is very convenient.
View detail
Good helmet lock
Good gelmet lock It's a really good product. Both the finish and the design are excellent. I bought the multiba twice. Thank you for your prompt delivery. I recommend this product to others, too View detail
The build quality is also good.
The workmanship is also good. ---------------------------- It looks great, too. Powered by Google Translator View detail
It is easy to install.
I'm not a moped, I don't open Seat every time I'm on the road.
So, personally, it is essentialItems
To install, simply remove the 4 screws and insert between the Grab Bar and
Super easy
It is hidden when the MINISeat bag of MOTOFIZZ is placed on it.
It was possible to use it without problems
View detail
It will be attached to 5VY, but....
I thought it was good news that the 5VY without a helmet lock would have one, so I installed it, but the lock part is facing down.
If you don't mind the details, the ability to add functions that were not there is a Large size.
The attached collar does not match the height, Bolt has changed to a 5mm shorter one in Black.
View detail
Eliminates a sense of lack.
The GSX250R is more of a tourer's motorcycle than a SS, and we installed the GSX250R to improve the dissatisfaction of having only a hard-to-use helmet holder behind the tandem seat, even though it is a motorcycle for city riding and touring.
The same type of bolt was used on GSR250, but that came with a slightly longer bolt, but this one is the OEM one.
However, I don't feel particularly uneasy about it, so it's not a problem.
It looks and feels somewhat lacking without it, so I think it is possible to install it as a one-point attachment.
View detail
regular product
Speaking of Honda cars of a while ago, this is an Overtorque with a tight screw lock, right?
I was worried about what to do with the long bit holder on Impact, but I was prepared to break the ball to spare the labor cost!
But then I wondered.
Hexagonal Wrench to the extent that it's in the toolbox, surprisingly….
Honda-san has become kinder!
I applied Screw lock and attached the screws to the board, because I didn't want the board to come off!
View detail
Fits: HONDA CB300R, HONDA CBR650R, HONDA CB150R, HONDA CB650R, HONDA CB250R, HONDA CB125R
Good build and feel. However, care must be taken when installing.
The lock itself is well made and actually useful, and I am glad I bought it.
Overall, we recommend this product, but there are some caveats.
Bolt is difficult to install.
The bolt that came with the Hexagonal Wrench hole was 1 size smaller than the OEMBolt, so when I tried to apply the specified Torque, I licked the hexagonal hole. In the end, I found a bolt with a Hexagonal Wrench hole size equivalent to the OEMB bolt at Home center and reinstalled it. (If you are worried about it, it might be safer to get it in advance; I think it cost about 200 yen for two bolts.)
Screw lock agent required
The handling instruction manual will tell you where to use the screw lock agent. It is necessary to obtain the manual in advance.
I don't know how to install Rubber parts in "Included Parts:".
When installing on a CB250R, the instructions say to install the rubber parts in the Included Parts:section, but I could not get them to fit. However, it seems that there is no problem even if it is not installed, so I am using it as it is.
View detail
Fits: YAMAHA YZF-R3 ABS, YAMAHA MT-03, YAMAHA MT-03 ABS, YAMAHA MT-25, YAMAHA MT-25 ABS, YAMAHA YZF-R25 ABS, YAMAHA YZF-R25 ABS, YAMAHA YZF-R25
usually
Hang is required for installation. View detail
Easy to use
It fits so well that it cannot be called Other Brand Product. View detail
I think things are good.
I thought it might be necessary, so I installed it.
The installation is easy to do, as it is firmly compatible with the car model. The product is solid and the work of hanging the helmet is easy.
However, in my case, it was not necessary to install it. I have a Rear Box for the Helmet, so I don't need to hang it down by my side anymore.
The product is a good one, but it did not suit my usage. In my case, I would have been better off buying a Wire lock for my Helmet.
View detail
Fits: HONDA CB300R, HONDA CBR650R, HONDA CB150R, HONDA CB650R, HONDA CB250R, HONDA CB125R
Required for Touring!
I bought this product because I was tired of the OEM Helmet lock which was difficult to use! It is still easy to use! When locked Pushing! It's a great product to use! Just wish it was a little cheaper lol. View detail
Fits: HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR
The OEM is not very user friendly!
I installed it on a 2024 CB1300SFSP!
We installed the said product due to poor usability of the OEM!
It is useful when you leave the Helmet in the vehicle and leave the Motorcycle!
But when you are away from home for a long time, it is better to carry a Helmet for security reasons.
View detail
Fit and perfect
I installed it on the Yamaha Tracer 900 GT, one on each side. The position is accurate and firm. It is convenient for parking and placing the helmet. It is securely locked. The price is cheap and it is worth installing. A good experience. The logistics is fast. Recommend you to buy this item------------------------------------------------ ---------- I installed it on the Yamaha Tracer 900 GT, one on each side. The position is accurate and firm. It is convenient for parking and placing the helmet. It is securely locked. The price is cheap and it is worth installing. A good experience. The logistics is fast. Recommend you to buy this item Powered by Google Translator View detail
Fits: YAMAHA BirdCity, YAMAHA Tricity155, YAMAHA BirdCity, YAMAHA Tricity155
It didn't fit.
I bought it because WeBig says it fits New Model from 2023,
Could not install.
I checked KIJIMA's Homepage and it was 2023 - not compliant,
View detail
Helmet lock
Installation is easy
Even at touring destinations, it was inconvenient to remove the Seat and put on the Helmet NORMALSpec. so it became convenient.
View detail