At the same time, weight can be reduced!

Grom's Fender is long and big, so I did a lot of refreshing with Active's Fender less.
Plus alpha made it possible to reduce weight as grom Fender is heavy.
The only complaint I have is that Wiring is exposed and needs to be protected. View detail

Refreshing the Rear Area

Normal fender of GSX-S is very large and heavy, so I made the fender less.
At first, I made my own bracket using a universal bracket, but the number position was not good, so I purchased an expensive but exclusive bracket.
The cover in front of the tandem seat needs to be removed in order to install it, and it is large and odd to fit the claw when reinstalling it.
It was a bit time-consuming because it was not easy to work without removing the side cover (if you force it, you will break the nail).
The installation process may be a bit tough for those who are not familiar with it.
It can't be helped by the new standard support for Number angle, but the angle is not good enough to stand up.
I thought about YOSHIMURA products, but they were about twice the price, so I gave up on them, although they seemed to be very well made. View detail

Tail clean!

It is well made and good.
I had installed Active's kit in all of my previous vehicles, so I had no hesitation in choosing them.
It is exclusive to the car model.
The Instruction Manual for installation was a little confusing in some places, but if you pay close attention, you can do it without any problems.

When installed, the back area is refreshed and gives a different impression.
After all, Custom starts with Fender Eliminator. View detail

Refreshing！

As long as you know the wiring, you can install it without any problem.
We had a hard time because we bought used and were tinkering with Wiring lol. View detail

It is easy to install.。

It seemed simpler and sturdier than other Manufacturer's products.
Installation was very easy and the quality was good. View detail

Number Angle 40-Degrees

I chose this one because the Number angle was 40-Degrees.
Number mounting plate is made of steel and Blinker mounting plate is made of Material:It is aluminum, so strength is not a problem. View detail

Parenthesis good anyway!

This is a customizable part for OEM Fender and Blinker that can be used together.
OEMBlinker (Bean Bulb) The reason for the "H" is because it is blotchy,
Active,
LEDNumber SIDEBlinker Straight (item no. 1150034)
And Quantity:Set. (Front Blinker) is replaced with LEDs made by Y's Gear).
As one would expect from the same Manufacturer, the compatibility is excellent. The accuracy of the product is excellent and the visibility is perfect.
Included Parts:As ACTIVELogo is included,
Axle Block
is included in the package. View detail

A little more, unfortunately.

I think it is fine with Spec. that the angle cannot be changed.
Unfortunately, it does not come with a Reflector, which should be included since it is sold as a product by Active:??
Is it because the price is higher than other manufacturers if it is included? That is my only regret. View detail

Fit perfectly on SX 24'

Fit perfectly on SX ninja 24' model and look much better the installation may take some time but it is worth it very recommended!! View detail

Easy to install, but ???.

Installation is easy, and the design fits well with the car body without any discomfort. However, I think that the reflector should be included from the beginning since ACTIVE also manufactures a reflector. View detail

It'll be cool!

I installed it for its appearance!
I am satisfied with the style and the large size!

But the removal of the OEMBlinker is Large strange!
I warmed up the rubber part with a dryer and removed it by prying with a slotted screwdriver.
Note that Blinker is also thin and easily broken!

Reflector is sold separately! View detail

It was not good.

The product is good, but the Instruction Manual is not beginner friendly.
Also, the screws in the "Included Parts:" were different from those in the Instruction Manual, and some were missing, making installation quite difficult. View detail

Stylish finish

I have purchased Active's Fender Eliminator Kit for every car model so far, so I chose this one again.
Installation requires touching Blinker's Wiring, so if you want to install it yourself, you will need to have at least a minimal knowledge of this area.

The product itself is solid and I have no complaints about its accuracy.
The only thing I would say is that Reflector is a security component and should be included in the package. View detail

When in doubt, this is the one. I'm glad I did.

[How is it used?
Duration:from about April 29, 2017 to as of September 10, 2023. Only the Blinker Bracket was removed at some Timing
Distance:approx. 68,197 km
Combination items:ACTIVE Reflector Kit Slim, POSH Faith Aluminum License Plate L Size, CF POSH SUS Number Plate Fixing Torx Taper Bolt & Nut Set

Was the one you received as per Image?
The product is exactly as pictured in the Image.

Was the installation difficult?
I think it was troublesome because I didn't know how to remove the cowl at all just after I switched to a new car. Furthermore, it is necessary to remove the seat and tail cowl, not the front part of the vehicle including the SIDE, which is usually removed for maintenance, so even now that I am used to it, I think it is still troublesome. Except for the removal of the cowl, the installation itself is not difficult.

How was your experience with it?
The installation of the Tandem seat naturally causes mud splashes to hit the Tandem seat, which is a cause for apology.
Since the most protruding part is the Tire or Tail cowl, the distance that can be retreated back is slightly increased for the same Space.
Since the Number is placed far forward, and the upper part of the Number is unguarded except for the bracket, the possibility of bending of the lower part of the Number due to a side bag or accidental human impact is increased.
Since all parts are RoseRose, OEM blinkers can be implanted in the beginning, and later, when blinkers are replaced, only the relevant parts can be targeted and removed, creating a clean look at all times.
Note that the Reflector, which must be used in conjunction with the Reflector, is not included in the package.
Probably sturdy, as it has not broken even with the aluminum plate, different bracket and blinker that are not included in the package.
The LED License Plate Lamp is also still reliable, as all four are still building materials.
The vehicle has been inspected as is, so it probably passed. (Vehicle purchased before the revision of the standards)

[Included Parts:were they on?
As shown in the product image.

[Was there anything that disappointed you?
I guess there isn't because there is nothing to be concerned about.

Conformity of License Plate with revised standards
Before revision Being able to read." It is not clear whether the safety standard is met for vehicles with clearly defined angles after the revision, since it has been in use since the time of the


This is a standard item that can be found at most Large Mortgage Motorcycle stores, and many riders have probably used it. It is a recommended product that can stand up to the mud and the mileage.
Since the revised criteria are unknown, the risk of BonusPoints being added when caught in some cases should be considered. View detail

I would like to see an effort to eliminate Option products.

Fender Eliminator had been using Active, so I bought it at Timing, where I had just finished inspecting the car.
It is unfortunate that the price became expensive because we purchased two Option Blinker and Bracket at the same time because we did not want Pannier to be out of the market. I think the product is insufficiently considered in this respect.
Also, although the simultaneous tightening of the License Plate Bracket and the License Plate can reduce the number of parts, it is disappointing that there is no texture.

The installation was the worst because I have a Bracket for GIVITop case, but I think it would be easy to install under normal circumstances.
If you do not use Pannier, which is also an Option consideration, I can recommend it. View detail

Active Fender Eliminator Kit

Fender Eliminator Kit made by Active.
The Rear area is now cleaner and Parenthesis better. View detail

Active Fender Eliminator Kit

Fender Eliminator Kit made by Active.
The Rear area is now cleaner and Parenthesis better.

https://www.shiba-vilogger01.com/article/471106849.html View detail

Cool

I bought it because I liked the way it looked.
I like the look of the Parenthesis as expected. I think the luggage space is a little narrower. View detail

It is quite Large strange.

I have not used any parts from Normal fender, so I use Other Brand Product for the blinker, and I have purchased additional OEM sub harnesses.
First of all, it is difficult to remove the Cowl, because the claw is so tight that you have to pull it in the right direction to remove it.
It is impossible to install the Bolt by one side at a time according to the instruction manual.:The two pieces of equipment must be installed at the same time, but please be careful not to drop the color at that time.
This is something that will not be known until it is installed, but the hole for the Wiring on the body side and the Wiring are exposed to water, so they will get wet. If the wiring is long enough, it may be possible to cut the Bullet Terminal of the License Plate Light and connect it directly.
It was an amateur job, and I had to install and remove the ardacoder, but the Rear area was refreshed and the parenthesis was improved. View detail

I think it looks good.

I bought it and installed it because I want to make Rear Refreshing.
The Instruction Manual said the installation time was 40 minutes, but it took 1 hour and 20 minutes.
It came with something like Sponge to fill the holes, but
I didn't know where to put it, so I didn't.
Holes were filled with Tape.
If you are someone who usually does maintenance and Custom yourself, you can do it on time.
Please refer to some people who have raised the installation on You Tube, etc. View detail