It's something that you can buy just because you think you've been cheated.

[How is it used?
It has been in use for about one month, mainly for city driving and touring.

Was the one you received as per Image?
I was a bit wary of the quality of the Bolt, as there were some impresarios posted on the site, such as the attached Bolt being the wrong length and BALI having a defective exterior finish, etc. However, I was relieved to find that the delivered product was of a satisfactory Level.
The color was a toss-up between Black and Polish, but the Black was inconspicuous with the parts attached to the feet, so Polish was chosen.

Was the installation difficult?
Easy to work with, bolt-on feel. Even a person with little experience can install it. I was worried about the interference between the low bolt and the change lever, but the necessary clearance was secured.

How was your experience with it?
The overall impression is that the cost-effectiveness depends on the person.
I did not feel any particular change when I tried using Manual operation without using the Automatic shifter. I think that people with a high Shift operation kill rate, who can originally limit the Shock to the smallest limit when shifting gears, may not feel the effect.
It may be the effect of the Brushbo effect, but the change I felt was that Kawasaki's distinctive GACHAAN sound in 1st gear became a little smaller, and the gearshift shock when shifting with the automatic shifter without paying attention to the engine speed (without adjusting the engine speed) became a little weaker. I think it's because the GACHA sound is a little bit smaller. I wonder if it's because of this.

[Included Parts:were they on?
None

[Was there anything that disappointed you?
I bought it with the feeling that I shouldn't have any expectations about the effects since the effects are subjective to each person, so no problem.

Other items that would be helpful
Installation point and hang:Although not mentioned in the Instruction Manual, the lever is installed as close to the outer side as possible to ensure clearance between the change lever and the low-head bolt. Since the change pedal is used frequently, we recommend applying a small amount of grease to the bearing portion that slides against the shaft. View detail

Certainly better.

Some people say it doesn't make much difference.

Amazingly good

It's okay to have people who say, "I'm a good person.

You won't know unless you try it yourself.

I was good!

It's not cheap.

Not too expensive.

if it's the case

Let's TRY it!

result

I'm glad I put it on.

I will leave this attached when I attach Rear Sets in the future. View detail

AELLAShift holderNINJA1000SX

Easier to install than expected.
I think I'm going in with GEAR or Snap.
Cospa is not that high. View detail

Not cost effective

The cut-out of the aluminum is rough, which is not good because motorcycleParts are supposed to be beautiful, so I polished it with PIKAL before installation.
Ninja1000-2014 is AE-74031
AE-74026 since 2017.
For some reason, the 2014 MODEL is not handled by WEBI, so it is purchased by individual quotation.
Delivery time 3 weeks
2-pieces Structure to fit the individual.
Co-clamped with Sprocket cover.
Screw lock agent is required for low head Bolt.
There is a manual. When I tried to do that, the corner of the Shift lever hit the low head Bolt and I couldn't Downshift.
I tightened the Bolt at the Limit without inserting the Shift lever all the way in.
If that's the case, you should put it in the Manual.
After installation, Shift enters Snap and … I think.
It's just a personal view.
I think it's not a good Parts because it's very expensive.
If you're going to pay Gold for this, you might as well put on a nice little Tire.
It'll be dirty with lube soon. View detail

One mounting bolt of "Included Parts:" is long.

Two problems.
1. The mounting bolt length of the "Included Parts:" is 10mm longer than the instruction manual, and it cannot be tightened.
2. Even the Bolt length described in the instruction manual is still too long.
I bought a new stainless bolt at a nearby home center (61Yen) and took care of it.
Manufacturer, please confirm the installation of the product and inspect it a little more. View detail