Reviews
Fits: KAWASAKI KSR110, KAWASAKI KLX110, HONDA MONKEY, HONDA MAGNA50, HONDA DREAM50, HONDA CUB Engine (FI Vehicles), HONDA CUB series Engine (Cell starter vehicle)
FIMONKEY, Flywheel removal
I think it was easy to use. It was safe to use. View detail
Required for 4EUEngine Overhaul
[How is it used?
I purchased this product to use for Engine overhaul of TZr50R.
The 4EUEngine Flywheel of TZr50R uses a special screw diameter and requires a special tool for this type of vehicle.
Was the one you received as per Image?
The product was exactly as shown in the Image and comes with the Instruction Manual, so it is ready to use as soon as it arrives.
How was your experience with it?
The quintessential product is a dedicated product and is quite easy to use.
Conversely, this is the only use for this Engine, so in a sense it is too much to handle.
To use the Fly Wheel Puller, attach the Fly Wheel Puller to the screw thread on the Crankshaft on the Flywheel side as shown in the video.
While holding it in place with the MONKEY, turn it. If it becomes very hard in the middle, you can easily loosen it by tapping it lightly with a rubber hammeretc. to give it a vibration. In my case, I pushed it through by force.
[Points to note]
Nothing special, but try not to damage Mt. Screw.
How did it compare to other products?
The competing product is the YAMAHAOEM SST, but the price is not much different, and this one is more economical since it comes with a point.
View detail
Kitaco Flywheel Puller (TZR50R)
Excellent tool to remove the flywheel on a TZR50/RZ50-2 or TZM50. Worked perfectly. You need this tool to remove it successfully. This is different from normal pullers because the thread is on the outside of the flywheel (stator coil is mounted to the flywheel cover instead of under the flywheel). Easy to remove without damage. View detail
Fits: KAWASAKI KSR110, KAWASAKI KLX110, HONDA MONKEY, HONDA MAGNA50, HONDA DREAM50, HONDA CUB Engine (FI Vehicles), HONDA CUB series Engine (Cell starter vehicle)
Trust Manufacturer item
This time, I bought to disassemble the Engine blown and overhaul it. I had tried to purchase it if I had opportunity than before. I purchased it because it was necessary to exchange Crankshaft this time View detail
When removing a Flywheel, other general-purpose Flywheel pulers were used, but the portion which a Flywheel removes has a special form and TZR50R was not able to remove it by a general-purpose thing. The direction which removes the Flywheel of TZR50R shou
When removing a Flywheel, other general-purpose Flywheel pulers were used, but the portion which a Flywheel removes has a special form and TZR50R was not able to remove it by a general-purpose thing. The direction which removes the Flywheel of TZR50R should buy this tool!! View detail
COSPAR thinks that it is good. In order to remove a Flywheel without using the tool only for , it will take time too. If it is this price, even if a tool breaks, it will feel inclined to buy it again.
COSPAR thinks that it is good.
In order to remove a Flywheel without using the tool only for
, it will take time too.
If it is this price, even if a tool breaks, it will feel inclined to buy it again.
View detail
Fits: KAWASAKI KSR110, KAWASAKI KLX110, HONDA MONKEY, HONDA MAGNA50, HONDA DREAM50, HONDA CUB Engine (FI Vehicles), HONDA CUB series Engine (Cell starter vehicle)
It was used with MONKEY FI. It is used by touch like the picture. The accuracy of the Screw has also worked certainly satisfactorily.
It was used with MONKEY FI.
It is used by touch like the
picture.
The accuracy of the
Screw has also worked certainly satisfactorily.
View detail
Fits: KAWASAKI KSR110, KAWASAKI KLX110, HONDA MONKEY, HONDA MAGNA50, HONDA DREAM50, HONDA CUB Engine (FI Vehicles), HONDA CUB series Engine (Cell starter vehicle)
It purchases in order to remove a Flywheel. The necessary minimum as a tool is filling. Since Injection MONKEY differs in a Flywheel from the MONKEY of a carburetor, it is this tool. Be careful.
It purchases in order to remove a Flywheel.
The necessary minimum as a
tool is filling.
Since
Injection MONKEY differs in a Flywheel from the MONKEY of a carburetor, it is this tool.
Be careful.
View detail
[Webike Monitor] It was used on the occasion of Engine decomposition of TZR 50R. The easy description also followed. It has been used especially satisfactorily. incidentally -- being pure (1 or 470 yen) -- although it was high, the way of this prod
[Webike Monitor] It was used on the occasion of Engine decomposition of
TZR 50R.
The easy description also followed.
It has been used especially satisfactorily.
incidentally -- being pure (1 or 470 yen) -- although it was high, the way of this product came out in a user friendly manner, and carried out.
View detail
Fits: KAWASAKI KSR110, KAWASAKI KLX110, HONDA MONKEY, HONDA MAGNA50, HONDA DREAM50, HONDA CUB Engine (FI Vehicles), HONDA CUB series Engine (Cell starter vehicle)
It purchased in order to remove the flywheel of KSR110. Functionally, it is satisfactory at all. It is not too bad.
It purchased in order to remove the flywheel of KSR110.
Functionally, it is satisfactory at all.
It is not too bad.
View detail