Easy to store!

I used it for Filler cap and Grip. Grip is about to be replaced so I used it as a first aid spec. 25m long so I don't mind if I fail in wiring. It is 25m long so I don't mind if it fails in wiring lol. View detail

Wiring for the first time

What made you decide to buy?
Wiring is mainly to prevent parts from falling out. Oil Filler CapSecurity is reinforced this time, the Oil Filler Cap of Motorcycle is bare and can be easily loosened by hand except for its special construction. If it is pranked or … stolen on the road, … that's why I bought it.

[How did you like it when you used it?
The wire used for wiring seems to be basically Stainless Steel Wire.:Pro safety wire is a soft stainless steel wire packed in a compact resin case. The wire size is 0.6mm. I was concentrating on my work, and when I realized, my hand was bleeding. Also, be careful not to scratch the area around the installation. Also, be careful not to scratch the area around the installation. I installed this wire ring for the first time, but I twisted it too much, and it got shredded in the middle, … the twisting position did not work, … I failed many times, but the contents are 25m long, so you don't have to worry even if you make a mistake. With the current construction, it will be years before the Wire is gone. View detail

DAYTONA Pro safety wire

After using a wire, it becomes RoseRose, or bounces around, etc., and you feel trouble in storing it. However, this type is used by pulling it out of the resin case, so there is no need to worry about such hassles. It is very easy to use. View detail

It is effective for loosening, and it is also sustainable.

This product is effective in loosening screws and other fasteners. I like the long-lasting effect and the compact case for easy storage! View detail

It takes a lot of force

This was my first time doing Wiring, so I did it a few times and got a hang of it Like The good thing about this one is that you can take out as much as you want and not worry about the rest Thing I don't have a full-blown Circuit run, so I'm going to keep it loose and do it so I don't make mistakes I think I'll go 。 View detail

The first Wiring

【What made you decide the purchase?】 Price and Brand
【How was it actually used?】 There is a hole in Case and you do not have to tangle in a way to pull out from Soko
[Is there anything I was disappointed about?] Nothing in particular
【Hope for Manufacturer - Please tell me if there are any improvement points】 No particular
【Have you compared items?】 EARLS Stainless Steel Wire
[Others] I referred to the price and the Impression of other people as being the first Wiring.
Durability etc. I do not know yet, but I think that the goal of falling prevention measures will be fully fulfilled. View detail

Moderate amount and easy to use Package. But it is expensive....

I bought it for the purpose of Wiring for Grip.

If it comes to Race, the story is different, but I think that it will be used for only Grip's Wiring for many years.

Compared to the needle gold sold at Home center and 100, it is easy to install with just thickness, and Package is designed to make it easier to retrieve Wire so even an amateur like me can avoid warming up at construction.
And the thing that I personally best was not having to pay attention to keeping it because of Package.
I can not hit my eyes if it comes to things like being crushed by other tools in the tool box and not being usable.

Is it a price problem if it is strongly difficult to name it.
Even if you put Package at least it is best to sell it for around 500 yen.
Together with the cheapest Wiring special tool, I thought that 3000 yen was a bit painful.

It is two stone one-piece Items with Grip's anti-rotation and Racer-like Dress-up effect. There is no doubt that it seems to be ok for someone who understands.
However, because the price is high, I will keep it as four stars. View detail

It is necessary and enough if you keep the Grip

First of all, I have never used StainlessWire, so there is no comparison target.

Since I only use Grip for usage, I think that the amount is also more than enough, I think that it will not go away from now (Lol)

Course drive etc etc. And those who also want to keep Bolt may have a little more amount.

It seems to be adequately sticky, it does not get screwed easily even if it is Wiring, and Case is well done and pulling the tip that is coming out of the Small hole will not get tangled and it will be a nice thing to come out is. View detail

It's a Compact.

Purchased with Wire twister.

It is pretty strong in thin slits.

Wiring at STREET is not an obligation, but as it looks like Race ish it will prevent Bolt from dropping out.

Since it contains a lot of quantity, I'm wasting ScrewScrew and playing. (Lol View detail

It purchased simultaneously with the Tool of a Wiring.Although other various Weir had, it chose to enter a Case as the business which can be rolled also in the tool box.Since an inner pig carries out Well maintenance of Weir's end, it is very easy-to-use.

It purchased simultaneously with the Tool of a Wiring.Although other various Weir had, it chose to enter a Case as the business which can be rolled also in the tool box.Since an inner pig carries out Well maintenance of Weir's end, it is very easy-to-use. View detail

Since it goes into the container, and a place is not taken, either, but can take out immediately and twines to use, it does not become precocious.Even if it takes out too much, a Wire or returning to a container, since it is soft are not delayed, either.I

Since it goes into the container, and a place is not taken, either, but can take out immediately and twines to use, it does not become precocious.Even if it takes out too much, a Wire or returning to a container, since it is soft are not delayed, either.If it can do, it is good in a Wire being longer, but it is considered as expectation to purchase next time. View detail

the hole being open to the inner cover and taking out a Wire from there -- -- it is terrible -- it is convenient. Since it can take out without twining, when required, it can use immediately. I merely want quantity to a slight degree.

the hole being open to the inner cover and taking out a Wire from there --
-- it is terrible -- it is convenient.
Since it can take out without twining, when required, it can use immediately.
I merely want quantity to a slight degree. View detail

Repeat purchase was carried out for the wire supplement. Even if it has fitted in the resin case for exclusive use and puts into the tool box, a wire does not tangle. It is very user-friendly and finds it useful. Since only a required part can

Repeat purchase was carried out for the wire supplement.
Even if it has fitted in the resin case for exclusive use and puts into the tool box, a wire does not tangle.
It is very user-friendly and finds it useful.
Since only a required part can be taken, it is easy to do work, and it is pleasant.
I think that a price may also become cheap and Eko may be sufficient as it as long as it can perform a put substitute of contents since a case must also be thrown away if usage OFF is kept.
They are goods of a recommend at those who do wire credit. View detail

He bought it 15 years ago. Did the package also change now (~~~; can many things be used?)? It will be helpful if it puts into tool boxes, such as races, such as fixation, touring, etc. of a handle grip!

He bought it 15 years ago.
Did the package also change now (~~~; can many things be used?)?
It will be helpful if it puts into tool boxes, such as races, such as fixation, touring, etc. of a handle grip! View detail