Meter Cover

About quality and texture - Good Quality Difficulty of installation - Easy to Install If Its in Ready Stock and less waiting time would be great View detail

Magical Racing Meter Cover

Fits perfectly & looks very good! Its carbon fiber just like the product photo! Its plug & play so its very easy to put on, no complications! View detail

It's really just a dress-up.

As Title
When you look at the Meter when you're in the middle of a
It is a Recommendation for Carbon lovers because it is in your eyes.
I'm sure there aren't.
I'm thinking that the Meter Lens part also has a clear plastic.
I'm afraid you're making an unfortunate mistake.
I literally bought it as a Cover.
There is nothing in the Lens portion.
The installation was left to the store when the car was inspected.
BOLDOR 2009. View detail

Double-sided tape is weak.

I bought it because I wanted to change the cheap look of the transparent plastic cover of the ZrX1200 DAEG Meter, which I had been interested in for a long time.
The double-sided tape was not very adhesive and peeled right off, so I cut a piece of Ultra Strong Double-Sided Tape for Emon's exterior parts in the size of 5mm?20mm and reattached it. Ultra Strong Double-Sided Tape for Emon's exterior parts, 5mm?20mm in size, and re-cut and reapplied.
I chose G Silver and was personally satisfied with the AluminumMount Meter-like look.
Also, there were a few minor issues, such as a gap in the position of the blinker indicator hole and a slight gouge in the hole for the high beam indicator. This is unfortunate because these are not cheap parts. View detail

Beauty & Protection

A quality item from magical, that truly makes the dash of the RC51 look magical. Protects the dash from sun damage, and gives it so much visual appeal. View detail

Magical racing Meter cover

I like Twill Weave Carbon too much and I am a believer of Magical racing.
I bought G Silver this time instead of the usual Carbon...
Parenthesis is better and more beautiful than I expected! I am very happy with it, although I have to choose where to use it.
We are grateful to Magical racing because we were not sure if they would produce the product when we placed the order and the delivery date was undecided! View detail

It was more hade than I expected.

Ponting with Double-sided Tape (pre-pasted on the inside of the Body).
The actual product was more flashy and closer to silver than what I saw in the picture. 。 It didn't feel right at first.
This might be good once you get used to it. 。 I have come to think that this is a good idea.
We also used ELMeter for the meter, so the area around the PadMeter was glossy. View detail

I bought it because I heard that Meter dissolves.

I bought this to prevent Meter from melting under the influence of Screen.

For now, it is Cool.

That's all. View detail

I put it on because I was worried about the deterioration of Plastic since I have been driving for more than 10 years.

The deterioration of the sunburn etc. increases little by little because it rides for a long time.
I installed it to make it look a little better.
I'm happy with the way it looks, but...
It seems a little expensive. View detail

The Meter area is now Parenthesis better.

The meter area was a little lonely, so I introduced Carbon parts.
It became gorgeous at once, and the sports feeling was improved.
It's easy to attach with Double-sided Tape. View detail

I'm feeling a little cheesey.

When I placed an order with Webike, I was forced to cancel the order due to undecided delivery date.
I will continue to use Webike even though the delivery time and stock management are still a bit of a problem.

The product is simply peeled off the release paper of the double-sided tape, which is glued from the beginning, and placed on the OEMMeter.
Degrease and clean the OEMMeter side before installation.

Unlike other Magical racing products, Magical Racing's cheesy seal is attached from the beginning.
It is not possible to see it because it is not a pull-out letter, so let's remove it immediately.

LusterLusterCarbon, so it feels a little cheap, but it's a matter of taste.
The fit feeling is good and there is no rattle etc.
I think the product quality is high. View detail

It makes a very different impression.

Changing the Meter makes quite an impression. Only I can see it, but I am satisfied with it. The brightness can also be adjusted and is quite bright. View detail

It's as good as the word Exactly and addictive!

Made to Order, so it will take some time to deliver, but otherwise it's perfect!
It fits the Meter with Exactly and the texture of Carbon is perfect!
The area around the meter is where you can see the car while driving, and it's the most customizable part of the car, so it's a great place to get into with Twill Weave Carbon.
In my case, even the double-sided tape that comes with it does not peel off even in this scorching weather and Firmly, so it is safe, but if you are worried about it, I think you can add it if you want! View detail

Modeling as a product is a point

Purchased to hide the Meter case, which got melted in the company's Carbon Trim Screen with convergence. There is no particular problem in shaping, but Double-sided Tape that is attached for installation is not useful at all.
Thickness : I prepared a 1 mm Strong Double-sided Tape myself and installed it.
View detail

Cool

Since we are based on Black, we first made Meter not a Solid Black but a Carbon, even though we are driving, we are satisfied with Large change. View detail

Self-satisfaction

I tried to buy it because it made it Carbon, but the Double-sided Tape of the installation is too weak and it is being replaced with a powerful Tape and in use. Chamfering of details is not good and it may be cheaper a little more in price. Sticker's bonus is coming.. View detail

Processing required for installation

When installing, you need to shave considerably, and the attached Tape is not enough at all, so you need to buy it.
In addition, as Meter's Button operation becomes difficult, compromise is not allowed for installation processing. View detail

Race ish Dress-up parts

Just cover the Meter and fix it with Double-sided Tape.
The reverse side is not bare glass fiber bare
There is no worry that it will hurt Meter because it is Gael Coat.
* There may be rubbing due to running vibration in the future?

The visibility of Meter information is also no problem. (Turn signal of the corner suffers a little)
The appearance changes like a glitter and becomes Race ish.
Since there are plain weave types and Silver carbon
Do not mistake the order!
* Image thing is plain weave type.

Quality well and attached with no processing.
Sticker is also included.

Because there is a gap between Cover and Meter,
Dust and sand etc. get in trouble. View detail

GOOD

Because I am on the Motorcycle and it is the most noticeable place, I decided to buy it somehow..
After all the atmosphere changes.
It looks like a luxurious feeling, like Race ish, I feel it.. View detail

luxury

I wanted to make Carter Style around Meter, I bought it.

First of all, at the tacking stage prior to installation, Just fit.
There is no subtle Gap at installation,
"Captitether, Pitt"
It was like I felt.

It was the first time for Kore series products, but it feels nice.

However, as you can see from the picture,
Part of ABSLamp (Speed ??meter side - Outer lower part)
Oil lamp part (Tacho Meter side - Outer lower part)
A little overlap.
It can not be helped because it is a difficult place because of its shape.

I think that it is Manufacturer who is doing my best more
To dare -1 ☆

Also, LogoSeal was pasted on the top of CenterMeter, but it peeled off.
Because - - - Beautiful Carbon, so it was fine as it is. (≧ ▽ ≦)

Tentatively, best.
Feeling, 5 horsepower up (Lol) View detail