Check my coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See All
CB1300 SF 98-00 (SC40)
CB1300SUPER BOLDOR 98-00
Product Detail
Specification:
[Size]
Width: 680mm
Height: 65mm
Depth (Pull): 127mm
Outer Diameter: Φ22.2
Iner Diameter: Φ14
Standing Angle: 73 degrees
Aperture Angle: 27 degrees
Compared to stock: 7mm up/7mm back
Weight: 550g G
[Specifications]
Bore hole: Switch hole machined
Clutch cable (hose) fitment: ○
Throttle cable fitment: ○
Choke cable fitment: ○
Brake hose fitment: ○
[Country of manufacture] Japan
Width: 680mm
Height: 65mm
Depth (Pull): 127mm
Outer Diameter: Φ22.2
Iner Diameter: Φ14
Standing Angle: 73 degrees
Aperture Angle: 27 degrees
Compared to stock: 7mm up/7mm back
Weight: 550g G
[Specifications]
Bore hole: Switch hole machined
Clutch cable (hose) fitment: ○
Throttle cable fitment: ○
Choke cable fitment: ○
Brake hose fitment: ○
[Country of manufacture] Japan
[Description]
Specially designed for models with a comfortable position by moving it forward about 10mm compared to the normal position.
The design is based on the stock handlebar shape, but the grip part has been shifted in parallel.
The angle is the same as the stock one, so you can form a good riding position without damaging the image.
■No need to replace cables
It is designed for exclusive use of the model, so you don't have to worry about compatibility.
■Switch hole pre-machined
You no longer need to worry about positioning and preparing tools, and you no longer need to spend extra money.
■Shift the lever holder to the left or right
The mounting straight line is designed to be about 5mm longer.
The grip position of the lever can be fine-tuned.
The design is based on the stock handlebar shape, but the grip part has been shifted in parallel.
The angle is the same as the stock one, so you can form a good riding position without damaging the image.
■No need to replace cables
It is designed for exclusive use of the model, so you don't have to worry about compatibility.
■Switch hole pre-machined
You no longer need to worry about positioning and preparing tools, and you no longer need to spend extra money.
■Shift the lever holder to the left or right
The mounting straight line is designed to be about 5mm longer.
The grip position of the lever can be fine-tuned.
Note
* The image is only for reference. The image shown may differ from the actual product.
Caution
The bar end is not included in the product.
※ Stock handlebar weights cannot be used, each type of handlebar weight (for aluminum handlebars/steel handlebars) can be used.
"Approx. 10mm compared to stock" is a rough estimate and may vary from model to model.
Depending on the model, the overall width may differ from the width indicated on the bike inspection certificate. The stock handlebar end cannot be used.
※ This product does not fit the CB1300SF and CB1300SB 01-02 models.
※ Stock handlebar weights cannot be used, each type of handlebar weight (for aluminum handlebars/steel handlebars) can be used.
"Approx. 10mm compared to stock" is a rough estimate and may vary from model to model.
Depending on the model, the overall width may differ from the width indicated on the bike inspection certificate. The stock handlebar end cannot be used.
※ This product does not fit the CB1300SF and CB1300SB 01-02 models.
Applicable Models
CB1300 SF 98-00 (SC40)
CB1300SUPER BOLDOR 98-00
