Check my coupons
Product Detail
[Description]
The best-selling "Paralyzer II" is now even more powerful!Increased chamber capacity and improved power / torque / output characteristics!All new specs are here!Paralyzer III
■Just by installing it on a stock bike, the power output is increased and the maximum speed is increased by approx. 5-15km/h.(Air cleaner box required) Basically, you need to set the weight roller.The setting of the weight roller will vary depending on the condition of the motorcycle (different engine conditions).You will be able to run well by reducing the weight of each engine condition.
■The jet setting of the carburetor is basically not necessary.
■NewTZ type aluminum silencer is adopted.In addition, the glass wool can be easily replaced with a one-touch operation to cope with changes over time.(about 10 minutes)
■Please be sure to perform the necessary inspections and maintenance before installing and driving the bike.
★*50cc scooters are equipped with a "limiter" device that prevents them from going faster than 60km / h.If this device is not removed, the performance will not be improved even if this chamber is installed.(Causes a misfire. ) You need to cut the limiter."If you want to cut the limiter, please use Chameleon Factory "RCDI" which has a built-in limiter circuit.The best match for our chamber with the most suitable program!!!
■Just by installing it on a stock bike, the power output is increased and the maximum speed is increased by approx. 5-15km/h.(Air cleaner box required) Basically, you need to set the weight roller.The setting of the weight roller will vary depending on the condition of the motorcycle (different engine conditions).You will be able to run well by reducing the weight of each engine condition.
■The jet setting of the carburetor is basically not necessary.
■NewTZ type aluminum silencer is adopted.In addition, the glass wool can be easily replaced with a one-touch operation to cope with changes over time.(about 10 minutes)
■Please be sure to perform the necessary inspections and maintenance before installing and driving the bike.
★*50cc scooters are equipped with a "limiter" device that prevents them from going faster than 60km / h.If this device is not removed, the performance will not be improved even if this chamber is installed.(Causes a misfire. ) You need to cut the limiter."If you want to cut the limiter, please use Chameleon Factory "RCDI" which has a built-in limiter circuit.The best match for our chamber with the most suitable program!!!
Caution
*To achieve the best performance, the limiter must be removed or settings need changing.
*There may be changes in product specifications due to the manufacturer's reasons.
*There may be changes in product specifications due to the manufacturer's reasons.
Applicable Models
