Check my coupons
Product Detail
Specification:
4.0J disc specification
Swing arm pipe shape:Standard
Stabilizer: No
Material :Aluminum 7N01 material used
Swing arm pipe shape:Standard
Stabilizer: No
Material :Aluminum 7N01 material used
[Description]
The 4.0J (for disc) swingarm for Dax / Chaly is the same width as the Monkey Wide (187-190mm width) swingarm.
G-Craft part number: 39048 You can use a disc hub to convert to 4.0J disc.
Please use G-Craft part number 33130 for the caliper support.
■Option Description
[Swingarm finish]
・Black anodized finish (G-Craft part number: 60198)
・Cerakote finish (G-Craft part number: 60807)
[What is Cerakote?]
Cerakote is a special heat coloring and normal temperature paint manufactured by NIC and currently used by the US military.
It has been inspected to meet the harsh conditions, and has excellent heat resistance, abrasion resistance, durability, solvent resistance, heat dissipation, heat insulation and other performance-oriented research and production.
Ceramic is crushed by a special machine and mixed into the paint to improve the strength of the paint film.Therefore, the surface becomes pear-shaped, but the coating film can be made very thin (25 microns)
Weld marks (beads) can be left on the surface without being hidden.
The adhesion is the highest among all coating materials, and the surface treatment is suitable for frames and swingarms because it does not wrinkle even when bent, and the paint does not peel off easily even by stepping stones.
*Please allow 3 to 5 weeks for normal delivery.
[Option 1] Chain slider bolt fixing specification (G-Craft part number:60228)
Change the chain slider from riveted to bolted.Easy to replace when worn out.
[Option 2] Stand hook base (M6) additional processing (G-Craft part number: 60903)
G-Craft stand hook or aftermarket stand hook (M6) can be attached.
[Option 2] Pivot part bearing specification (G-Craft part number: 60006)
The standard is to change the pivot part of the bushing to a bearing.
Improved durability and smooth operating characteristics.
Note
Swing for other G-Craft Ducks Arms are here.
Swing for other G-Craft Ducks Arms are here.
Other G-Craft Dax swing arms for stock hubs here.
Click here for other G-Craft NSR50 Wheel Mount Dax Swingarm
Click here for other G-Craft Super Wide Wheel Dax Swingarms.
Click here for other G-Craft Dax Swingarms for Wide Wheels. * This item can not be cancelled, returned nor exchange after placing an order.
* The image is only for reference. The image shown may differ from the actual product.
Caution
*Drum hubs cannot be used.
*Even if the length is changed, the suspension support position will be the stock position.
*Only triple square pipe, chain slider is also attached at the bottom.
*Image 2 is the installation image of the pipe shape: Triple Square Mini.
*Image 3 shows (1) black anodized finish and (2) Cerakote finish.
*Image 4 is optional :This is an image of the chain slider bolt fixing.
*Image 5 is optional :The image above shows Stand Hook Base (M6).
*Image 6 is optional :This is an image of the pivot bearing specification.
*Even if the length is changed, the suspension support position will be the stock position.
*Only triple square pipe, chain slider is also attached at the bottom.
*Image 2 is the installation image of the pipe shape: Triple Square Mini.
*Image 3 shows (1) black anodized finish and (2) Cerakote finish.
*Image 4 is optional :This is an image of the chain slider bolt fixing.
*Image 5 is optional :The image above shows Stand Hook Base (M6).
*Image 6 is optional :This is an image of the pivot bearing specification.
Applicable Models
CHALY
DAX
