Check my coupons
Product Detail
Specification:
for Mono Shock
for NSR50/80 Wheel
Swingarm Pipe Shape: Triple Square
Stabilizer: -
Material: Aluminum 7N01
for NSR50/80 Wheel
Swingarm Pipe Shape: Triple Square
Stabilizer: -
Material: Aluminum 7N01
[Description]
This is a swingarm that can be used with NSR50 / 80 wheels on Monkey / Gorilla.
Swingarm width is 184-187mm.
Using the 12 inch wheel of NSR50 / 80 to convert the Monkey to 12 inch can be done.
■Option Description
[Swingarm finish]
・Black anodized finish (G-Craft part number: 60198)
・Cerakote finish (G-Craft part number: 60807)
[What is Cerakote?]
Cerakote is a special heat coloring and normal temperature paint manufactured by NIC and currently used by the US military.
It has been inspected to meet the harsh conditions, and has excellent heat resistance, abrasion resistance, durability, solvent resistance, heat dissipation, heat insulation and other performance-oriented research and production.
Ceramic is crushed by a special machine and mixed into the paint to improve the strength of the paint film.Therefore, the surface becomes pear-shaped, but the coating film can be made very thin (25 microns)
Weld marks (beads) can be left on the surface without being hidden.
The adhesion is the highest among all coating materials, and the surface treatment is suitable for frames and swingarms because it does not wrinkle even when bent, and the paint does not peel off easily even by stepping stones.
*Please allow 3 to 5 weeks for normal delivery.
[Options: Chain Slider Specifications]
Chain slider bolt fixing specification (G-Craft part number: 60228)
Change the chain slider from riveted to bolted.Easy to replace when worn out.
[Options: Additional processing of stand hook base]
Stand hook base (M6) additional processing (G-Craft part number: 60903)
G-Craft stand hook or aftermarket stand hook (M6) can be attached.
[Options: Pivot section structure]
Pivot section bearing specification (G-Craft part number: 60006)
The standard is to change the pivot part of the bushing to a bearing.
Improved durability and smooth operating characteristics.
[Options: Chain pull specification]
Chain pull option
・Racing stand hook specification (G-Craft part number: 60186)
The rear part of the conventional chain pull can be used as a stand-hook.G-Craft Part Number: The 32071, 32072 and 32073 racing stand hooks can be installed.
*G Kraft Part Number:33170AP Lockheed caliper support cannot be installed (will interfere)
・Back pull type (G-Craft part number: 60221)
This backward pull adjuster is designed to eliminate the hassle of adjusting the chain.
Since the adjusting nut is located at the last part of swingarm, it is easy to adjust the adjusting part which was difficult to turn due to interference of tools.
*Can not be installed on the racing stand hook specification and OW type at the same time
・OW type (G-Craft part number: 60014)
The chain puller is tapered to eliminate vertical misalignment of the axle shaft.
The tapered frame moves so there is no vertical misalignment.This mechanism is also used for swingarms of big bikes.
・OW type racing stand hook specification (G-Craft part number: 60188)
The rear part of OW type chain pull is changed to stand hook specification.
G-Craft Part Number: The 32071, 32072 and 32073 racing stand hooks can be installed.
*G Kraft Part Number:33170AP Lockheed caliper support cannot be installed (will interfere)
・Eccentric type (G-Craft part number: 60199)
This is an eccentric type chain puller commonly found on Kawasaki motorcycles.
*Only caliper supports with calipers attached to the lower part of the swingarm can be used on disc models.
*Swingarm for wide wheel can be used only with disc specification.
Note
Click here for other G-Craft Monkey Twin Shock Swingarms.
Here are other swing arms for G-Craft Monkey Monoshock.
Click here for other G-Craft Monkey truss swing arms.
Click here for Other G-Craft Monkey Normal Look Swingarm.
Click here for Other G-Craft R Wheel Mount Monoshock Swingarms.
For other G-Craft Standard Wheels Monoshock Swingarm are here.
Click here for other G-Craft NSR wheel mounted monoshock swingarms.
For other G-Craft Super Wide Wheels Monoshock Swingarm are here.
For other G-Craft Wide Wheel Monoshock Swingarm is here. * This item can not be cancelled, returned nor exchange after placing an order.
* The image is only for reference. The image shown may differ from the actual product.
Caution
*It requires front off-set sprocket 7mm when mounting the wheel.
*The triple square pipe and the chain slider are included in the below.
*Please use rear shock for NSR 50/80.
*For the type 2 with standard stabilizer, the main pipe is42mm x 32mm thick pipe. (32mm x 32mm thin pipe specification with standard stabilizer)
*The product (pipe shape) on the photo #1 is a triple square.
*The product on the attached photo #3 is for reference of the (1) black anodized finishing, (2) sera coating.
*The option of the product on the photo #4 is: chain slider bolt stopper.
*The option of the product on the photo #5 is: stand hook base (M6).
*The product (option) on the attached photo #6 is for reference of the pivot part bearing specification.
*The product (option) on the attached photo #7 is for reference of the height adjustment type suspension mount function.
*The product on the attached photo #8 is a reference for chaining option.
(1) Chain Pulling: Back Pull Type
(2) Chain Pull: Standard (Racing Stand Hook Specification)
(3) Chain Pull: OW Type (Racing Stand Hook Specification)
(4) Eccentric Type
*The triple square, and triple square mini for MONKEY is a standard swing arm pivot structure: bearings
*The triple square pipe and the chain slider are included in the below.
*Please use rear shock for NSR 50/80.
*For the type 2 with standard stabilizer, the main pipe is42mm x 32mm thick pipe. (32mm x 32mm thin pipe specification with standard stabilizer)
*The product (pipe shape) on the photo #1 is a triple square.
*The product on the attached photo #3 is for reference of the (1) black anodized finishing, (2) sera coating.
*The option of the product on the photo #4 is: chain slider bolt stopper.
*The option of the product on the photo #5 is: stand hook base (M6).
*The product (option) on the attached photo #6 is for reference of the pivot part bearing specification.
*The product (option) on the attached photo #7 is for reference of the height adjustment type suspension mount function.
*The product on the attached photo #8 is a reference for chaining option.
(1) Chain Pulling: Back Pull Type
(2) Chain Pull: Standard (Racing Stand Hook Specification)
(3) Chain Pull: OW Type (Racing Stand Hook Specification)
(4) Eccentric Type
*The triple square, and triple square mini for MONKEY is a standard swing arm pivot structure: bearings
