Check my coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See All
APE 100
APE 50
Product Detail
Specification:
For Type D (NSR) Wheels
Linkless type 1
Swingarm pipe shape: triple square
Stabilizer: without
Material: Aluminum 7N01 material used
Linkless type 1
Swingarm pipe shape: triple square
Stabilizer: without
Material: Aluminum 7N01 material used
[Description]
Swingarm Weight: Stock 3.5kg to 1.8kg (*)
The swingarm is made of aluminum 7N01 material, which is 1.8kg (*) lighter than stock swingarm 3.5kg, and has high rigidity, which improves the operability of the motorcycle by reducing the unsprung weight.
This swingarm can fit NSR50/80 (Type D) wheels.
Swingarm width is 184-187mm.
A U-shaped brake stopper is welded to the inside of the swingarm.
G-Craft Part Number: The 33136 caliper support and the rear disc hub for Ape can be used to convert the drum model into a disc model.
G-Craft Part Number: The 33136 caliper support and NSR50/80 wheels can be used to convert the calipers to discs.
Fits 12-3.75J aluminum wheels.
*: Model: GROM / Pipe Type: Triple Square / No Stabilizer / +0cm
■Option Description
[Options: Swingarm finish] Black anodized / Cerakote
・Black anodized aluminum (G-Craft part number: 60198)
This is an option to make the surface of the swingarm beautiful black anodized finish.
・Cerakote (G-Craft part number: 60807)
Cerakote is a special baking and normal temperature paint manufactured by NIC and currently used by the US military.
It has been inspected to meet the harsh conditions, and has excellent heat resistance, abrasion resistance, durability, solvent resistance, heat dissipation, heat insulation and other performance-oriented research and production.
Ceramic is crushed by a special machine and mixed into the paint to improve the strength of the paint film.
This gives a pear-like surface, but the coating can be very thin (25 microns), and weld marks (beads) can be left without being obscured.
The adhesion is the highest among all coating materials, and the surface treatment is suitable for frames and swingarms because it does not wrinkle even when bent, and the paint does not peel off easily even by stepping stones.
[Option 1] Chain slider bolt fixing specification (G-Craft part number:60228)
Change the chain slider from riveted to bolted.Easy to replace when worn out.
[Option 2] Pivot section ball bearing change (G-Craft part number: 60006)
The pivot part that normally uses bushings is converted to ball bearings.
[Option 3] Stand hook base (M6) additional processing (G-Craft part number: 60903)
G-Craft stand hook or aftermarket stand hook (M6) can be attached.
[Option 4] Chain adjuster option
・Racing stand hook specification (G-Craft part number: 60186)
The rear part of the conventional chain pull can be used as a stand-hook.G-Craft Part Number: The 32071, 32072 and 32073 racing stand hooks can be installed.
*G Kraft Part Number:33170AP Lockheed caliper support cannot be installed (will interfere)
・Back pull type (G-Craft part number: 60221)
This backward pull adjuster is designed to eliminate the hassle of adjusting the chain.
Since the adjusting nut is located at the end of the swingarm, it is easy to adjust the adjusting part which was difficult to turn due to interference of tools
*Can not be installed on the racing stand hook specification and OW type at the same time
・OW type (G-Craft part number: 60014)
The chain puller is tapered to eliminate vertical misalignment of the axle shaft.
The tapered frame moves so there is no vertical misalignment.This mechanism is also used for swingarms of big bikes.
・OW type racing stand hook specification (G-Craft part number: 60188)
The rear part of OW type chain pull is changed to stand hook specification.
G-Craft Part Number: The 32071, 32072 and 32073 racing stand hooks can be installed.
*G Craft Part Number: 33170AP Lockheed caliper support cannot be installed (will interfere)
・Eccentric type (G-Craft part number: 60059)
This is an eccentric type chain puller commonly found on Kawasaki motorcycles.
*For disc type, only caliper supports with calipers attached to the lower part of the swingarm can be used.
[Option 5] Ride height adjustable suspension mount function addition processing (G-Craft part number: 60057)
It is changed to the suspension receiver with the height adjustment function of 7.5mm.
By moving the mountain part, you can easily change the rear ride height.
*Exclusively designed for NSR50 / 80 rear shock.
Note
Other Ape [Swingarm for Type D (NSR) Wheel] here.
Other Ape [Drum/Disc Wheel Shared Swingarm] here
Other Ape [Swingarm for Drum Brake Hub] here.
Click here for other Ape [NS-1 Wheel Swingarm]. * This item can not be cancelled, returned nor exchange after placing an order.
Caution
*Images are for reference only.Please confirm the shape of the pipe in the image 2 before purchasing.
*Images 3 and 4 are for installation on the vehicle.The swing arm is made of pipe:Triple Square with Stabilizer (Linkless Type 2).
*Image 5 is the image of (1) black anodized finish and (2) Cerakote finish.
*Image 6 is optional: This is an image of the ball bearing structure of the pivot section.
*Image 7 is optional: This is an image of the chain slider bolt fixing.
*Image 8 is optional :The image above shows Stand Hook Base (M6).
*Image 9 is an image of Swingarm Option 4.
(1) Chain adjuster: Back pull type
(2) Chain adjuster: Standard (Racing stand hook specification)
(3) Chain adjuster: OW type (Racing stand hook specification)
(4) Eccentric type
*Image 10 is optional:This is an image of the height adjustable suspension mount function.
*Rear shock is compatible with NSR50/80 (Ape stock cannot be used)
*Images 3 and 4 are for installation on the vehicle.The swing arm is made of pipe:Triple Square with Stabilizer (Linkless Type 2).
*Image 5 is the image of (1) black anodized finish and (2) Cerakote finish.
*Image 6 is optional: This is an image of the ball bearing structure of the pivot section.
*Image 7 is optional: This is an image of the chain slider bolt fixing.
*Image 8 is optional :The image above shows Stand Hook Base (M6).
*Image 9 is an image of Swingarm Option 4.
(1) Chain adjuster: Back pull type
(2) Chain adjuster: Standard (Racing stand hook specification)
(3) Chain adjuster: OW type (Racing stand hook specification)
(4) Eccentric type
*Image 10 is optional:This is an image of the height adjustable suspension mount function.
*Rear shock is compatible with NSR50/80 (Ape stock cannot be used)
Applicable Models
APE 100
APE 50
