Check my coupons
Product Detail
Specification:
Racing Swingarm Type 2
Year: 95-
Swingarm pipe shape: triple square
Stabilizer: existence (at the present moment)
Material: Aluminum 7N01 material used
Year: 95-
Swingarm pipe shape: triple square
Stabilizer: existence (at the present moment)
Material: Aluminum 7N01 material used
[Description]
Swingarm Weight: Stock 3.5kg→1.8kg (for GROM, triple square, no sway bar, +0cm)
The swingarm is made of aluminum 7N01 material and it is 1.8kg lighter than stock swingarm 3.5kg.
■Option Description
[Swingarm finish]
・Black anodized finish (G-Craft part number: 60198)
・Cerakote finish (G-Craft part number: 60807)
[What is Cerakote?]
Cerakote is a special heat coloring and normal temperature paint manufactured by NIC and currently used by the US military.
It has been inspected to meet the harsh conditions, and has excellent heat resistance, abrasion resistance, durability, solvent resistance, heat dissipation, heat insulation and other performance-oriented research and production.
Ceramic is crushed by a special machine and mixed into the paint to improve the strength of the paint film.Therefore, the surface becomes pear-shaped, but the coating film can be made very thin (25 microns)
Weld marks (beads) can be left on the surface without being hidden.
The adhesion is the highest among all coating materials, and the surface treatment is suitable for frames and swingarms because it does not wrinkle even when bent, and the paint does not peel off easily even by stepping stones.
*Please allow 3 to 5 weeks for normal delivery.
[Options: Chain Slider Specifications]
Chain slider bolt fixing specification (G-Craft part number: 60228)
Change the chain slider from riveted to bolted.Easy to replace when worn out.
[Options: Additional processing of stand hook base]
Stand hook base (M6) additional processing (G-Craft part number: 60903)
G-Craft stand hook or aftermarket stand hook (M6) can be attached.
[Options: Chain pull specification]
Chain pull option
・Racing stand hook specification (G-Craft part number: 60186)
The rear part of the conventional chain pull can be used as a stand-hook.G-Craft Part Number: The 32071, 32072 and 32073 racing stand hooks can be installed.
*G Kraft Part Number:33170AP Lockheed caliper support cannot be installed (will interfere)
・Back pull type (G-Craft part number: 60221)
This backward pull adjuster is designed to eliminate the hassle of adjusting the chain.
Since the adjusting nut is located at the end of the swingarm, it is easy to adjust the adjusting part which was difficult to turn due to interference of tools
*Can not be installed on the racing stand hook specification and OW type at the same time
・OW type (G-Craft part number: 60014)
The chain puller is tapered to eliminate vertical misalignment of the axle shaft.
The tapered frame moves so there is no vertical misalignment.This mechanism is also used for swingarms of big bikes.
・OW type racing stand hook specification (G-Craft part number: 60188)
The rear part of OW type chain pull is changed to stand hook specification.
G-Craft Part Number: The 32071, 32072 and 32073 racing stand hooks can be installed.
*G Kraft Part Number:33170AP Lockheed caliper support cannot be installed (will interfere)
・Eccentric type (G-Craft part number: 60199)
This is an eccentric type chain puller commonly found on Kawasaki motorcycles.
*Only caliper supports with calipers attached to the lower part of the swingarm can be used on disc models.
Note
Swingarm for other NSR50/80 Arm is here.
Click here for option stand hooks for racing stand hook specifications * This item can not be cancelled, returned nor exchange after placing an order.
* The image is only for reference. The image shown may differ from the actual product.
Caution
*It is not compatible at NSR50/80 up to 1994 model year.
・The swingarm for the '95 and later models will have the following VIN.
・NSR50: HC10-1700001-] [NSR80: HC06-1600001-]
*Ohlins integrated reservoir tank clear shocks are not compatible with this product.
*Shocks with a spring diameter of 80mm or more will not fit.
*Image 3 is an image of the swingarm finish option.
1・Black anodized finish / 2・Ceracoat finish
*Image 4 is an image of Option 1: Chain Slider.
*Image 5 is an image of Option 2: Pipot bearing processing.
*Image 6 is an image of Option 3: Additional processing of the stand hook base.
*Image 7 is an image of Option 4: Chain pull type.
1・Back pull type
2・Standard type (Racing stand hook specification)
3・OW type (Racing stand hook specification)
4・Eccentric type
*Image 8 is an image of the height adjustable suspension sissy bar.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
・The swingarm for the '95 and later models will have the following VIN.
・NSR50: HC10-1700001-] [NSR80: HC06-1600001-]
*Ohlins integrated reservoir tank clear shocks are not compatible with this product.
*Shocks with a spring diameter of 80mm or more will not fit.
*Image 3 is an image of the swingarm finish option.
1・Black anodized finish / 2・Ceracoat finish
*Image 4 is an image of Option 1: Chain Slider.
*Image 5 is an image of Option 2: Pipot bearing processing.
*Image 6 is an image of Option 3: Additional processing of the stand hook base.
*Image 7 is an image of Option 4: Chain pull type.
1・Back pull type
2・Standard type (Racing stand hook specification)
3・OW type (Racing stand hook specification)
4・Eccentric type
*Image 8 is an image of the height adjustable suspension sissy bar.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
