Super Motorcycle LOW Φ7/8-inch Handlebar Steel
- Product number: HB0042C-01
-
- |
- 4.0
- (1 reviews)
Check my coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See All
250TR -06 (Carburetor) *Processing of switch hole is required
ZEPHYR1100 *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
ESTRELLARSCustom 96-99 *Processing of switch hole drilling required|*Side cap required (for inner diameter φ18mm)
ZRX400II *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
ZRX400 *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
ZRX1200R *Required switch hole drilling process| *Required side cap (for inner diameter φ18mm)
ZRX1100II *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
ZRX1100 *Required switch hole drilling process| *Required side cap (for inner diameter φ18mm)
W800 *Required to drill switch hole|* Throttle cable, clutch cable and brake hose must be changed.
W400 *Required Switch Hole Drilled
BALIUS2 *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
ZEPHYRX *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
ZEPHYR750 RS *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
ZEPHYR750 *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
ZEPHYR400 *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
ZEPHYR1100 RS *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
Show more
MONKEY 84-07 (Z50J-1600008-,AB27-1000001-1899999)*With Top Bridge H30 Holder or MONKEY Handle Holder required.
APE 50 08-12 (FI Drum Brakes) *Processing of switch holes is required
MONKEY 09-12 (AB27-1900001-)(FI Vehicle)*Requires Top Bridge H30 Holder, or MONKEY Handle Holder|*Requires switch hole drilling
APE 50 -07|08 (Carburetor) *Only APE100(09-), Switch hole drilling required.
APE 100 -12 (Drum Brake) *APE100(09-) only, requires drilling of the switch.
NC700X 12 (Except DCT) *Processing to drill switch hole is required|*Essential side cap for 18mm diameter
CB1300 SF 03-09 *Modification of switch hole drilling required|*Side cap required (for inner diameter φ18mm)
FTR223 (with side numbers) *Processing of switch holes required
FTR223 (without side numbers) *Processing of switch holes required
CB750 04- RC42 *Modification of switch hole drilling required|*Side cap required (for inner diameter φ18mm)
CB1100 -12 SC65 (Uphan model)
CB1300SUPER BOLDOR 05-09 *Modification of switch hole drilling required|*Side cap required (for inner diameter φ18mm)
CB1300SUPER BOLDOR 10-12 *Processing of switch hole drilling required|* Side cap required (for inner diameter φ18mm)
CB400SS *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
CB400SF -98 NC31 *Processing of switch hole drilling required|* Side cap required (For inner diameter φ18mm)
Show more
TW200E 00- (Disc Brake Car) *Processing of switch hole is required
TW200 -99 (drum brakes)
TW200E -99 (drum brakes)
SR500 88-00 (CV cab models) *Processing of switch hole required
SR400 88-00 (CV cab models) *Processing of switch hole required
SR400 01-12 (Carburetor/FI disc brake models) *Processing of switch hole required
XJR1300 07-12 (RP17J) *Modification of switch hole drilling required|*Side cap required (for inner diameter φ18mm)
XJR1300 00-06 (RP03J) *Modification of switch hole drilling required|*Side cap required (for inner diameter φ18mm)
TW225E 00- (Disc Brake Car) *Processing of switch hole is required
Show more
Universal
Product Detail
Specification:
Handlebar Color: Chromium Plating
[Handlebar Specification]
Handlebar: Stainless Steel Chromium Plating/Outer Diameter: φ22.2mm/Inner Diameter: φ18mm
It can install a cable, hoses as normal.
[Handlebar Size]
Overall Length: 70mm
Overall Width: 745mm
Holder mounting part of the effective width: 125mm
Pullback Size: 165mm
Income Angle: 26-degrees
Anteversion Angle: 50-degrees
[Handlebar Specification]
Handlebar: Stainless Steel Chromium Plating/Outer Diameter: φ22.2mm/Inner Diameter: φ18mm
It can install a cable, hoses as normal.
[Handlebar Size]
Overall Length: 70mm
Overall Width: 745mm
Holder mounting part of the effective width: 125mm
Pullback Size: 165mm
Income Angle: 26-degrees
Anteversion Angle: 50-degrees
[Description]
Made in Japan.Prototype, installation confirmation and mass production are all under in-house management.These handlebars are made with a great deal of care and attention to detail, including careful selection of materials, several types of polishing, engraving of part numbers, high-precision bending and welding, and high-quality surface treatment, based on technology and know-how cultivated over many years in Osaka in Japan.STKM13A steel material with excellent tensile strength is used.Cleared by JMCA safety standard value.Triple nickel and chrome plating (3 layers of nickel and chrome) finish with thick film and excellent durability and corrosion resistance.
Note
Click here for monkey handle holder
Normal Handle Size List for 7/8 American model scooters
Normal Handle Size List for 1 Inch American models
List of normal handle sizes for 1" American models
Caution
*Handle clamps (holder or post) in the photo are not included in the product.
*Sizing shown is for a horizontal position.
*An application for structural change is required for any change in body dimensions exceeding ±40mm in height and ±20mm in width from those stated in the vehicle registration.
*Images may contain other colorings/other types.
Applicable Models
250TR -06 (Carburetor) *Processing of switch hole is required
ZEPHYR1100 *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
ESTRELLARSCustom 96-99 *Processing of switch hole drilling required|*Side cap required (for inner diameter φ18mm)
ZRX400II *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
ZRX400 *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
ZRX1200R *Required switch hole drilling process| *Required side cap (for inner diameter φ18mm)
ZRX1100II *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
ZRX1100 *Required switch hole drilling process| *Required side cap (for inner diameter φ18mm)
W800 *Required to drill switch hole|* Throttle cable, clutch cable and brake hose must be changed.
W400 *Required Switch Hole Drilled
BALIUS2 *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
ZEPHYRX *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
ZEPHYR750 RS *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
ZEPHYR750 *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
ZEPHYR400 *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
ZEPHYR1100 RS *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
Show more
MONKEY 84-07 (Z50J-1600008-,AB27-1000001-1899999)*With Top Bridge H30 Holder or MONKEY Handle Holder required.
APE 50 08-12 (FI Drum Brakes) *Processing of switch holes is required
MONKEY 09-12 (AB27-1900001-)(FI Vehicle)*Requires Top Bridge H30 Holder, or MONKEY Handle Holder|*Requires switch hole drilling
APE 50 -07|08 (Carburetor) *Only APE100(09-), Switch hole drilling required.
APE 100 -12 (Drum Brake) *APE100(09-) only, requires drilling of the switch.
NC700X 12 (Except DCT) *Processing to drill switch hole is required|*Essential side cap for 18mm diameter
CB1300 SF 03-09 *Modification of switch hole drilling required|*Side cap required (for inner diameter φ18mm)
FTR223 (with side numbers) *Processing of switch holes required
FTR223 (without side numbers) *Processing of switch holes required
CB750 04- RC42 *Modification of switch hole drilling required|*Side cap required (for inner diameter φ18mm)
CB1100 -12 SC65 (Uphan model)
CB1300SUPER BOLDOR 05-09 *Modification of switch hole drilling required|*Side cap required (for inner diameter φ18mm)
CB1300SUPER BOLDOR 10-12 *Processing of switch hole drilling required|* Side cap required (for inner diameter φ18mm)
CB400SS *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
CB400SF -98 NC31 *Processing of switch hole drilling required|* Side cap required (For inner diameter φ18mm)
Show more
TW200E 00- (Disc Brake Car) *Processing of switch hole is required
TW200 -99 (drum brakes)
TW200E -99 (drum brakes)
SR500 88-00 (CV cab models) *Processing of switch hole required
SR400 88-00 (CV cab models) *Processing of switch hole required
SR400 01-12 (Carburetor/FI disc brake models) *Processing of switch hole required
XJR1300 07-12 (RP17J) *Modification of switch hole drilling required|*Side cap required (for inner diameter φ18mm)
XJR1300 00-06 (RP03J) *Modification of switch hole drilling required|*Side cap required (for inner diameter φ18mm)
TW225E 00- (Disc Brake Car) *Processing of switch hole is required
Show more
Universal
GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps.
GRASS TRACKER Big Boy -08 (Carburetor)*Side caps can be used as stock.
GRASS TRACKER 09-12 43355(FI cars)*Side caps can be used for stock.
GRASS TRACKER -08-8(carburetor) *switch hole drilling is required|* You can use stock side caps.
RV200 VANVAN -07 NH41A Carburetor *Processing to open switch holes required|* The stock side caps can be used.
GSR400 -12 *Ask to drill switch holes|* Normal side caps can be used.
Show more
