Check my coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See All
HORNET250 *Need to drill switch hole
APE 50 08-12 (FI Drum Brake) *Processing of switch holes is required
APE 50 -07|08 (Carburetor)*APE100 (09-) only
APE 100 -12 (drum brake)*APE100 (09-) requires drilling of switch holes.
VTR250 03-07 MC33 (1020001-)*Processing of switch hole required|* Required side cap (for 18mm ID)
NC700S 12 (except for ABS and DCT cars) *Processing of switch hole is required|* Required side cap (for 18mm diameter)
FTR223 (with side numbers) * Requires modification of the clutch cable and choke cable.
FTR223 (without side numbers) * Requires modification of the clutch cable and choke cable.
CB750 04- RC42 *Processing of switch hole required|* Required side cap (for 18mm ID)
CB400SF -98 NC31 *Processing of switch hole required|* Required side cap (for 18mm ID)
CB400SS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
CB1300SUPER BOLDOR 10-12 *Processing of switch holes required|* Required side cap (for 18mm ID)
CB1300SUPER BOLDOR 05-09 *Processing of switch hole required|* Required side cap (for 18mm ID)
MONKEY 09-12 (AB27-1900001-)(FI)(FI cars)* Requires Top Bridge H30 Holder or MONKEY Handle Holder|* Requires drilling of switch hole
MONKEY 84-07 (Z50J-1600008-|AB27-1000001-1899999)*With Top Bridge H30 Holder or MONKEY Handle Holder required
Show more
RV200 VANVAN -07 NH41A Carburetor *Processing to open switch holes required|* The stock side caps can be used.
GSR400 -12 *Ask to drill switch holes|* Normal side caps can be used.
GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps.
GRASS TRACKER Big Boy -08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
GSX400 05-07 GK7CA *Processing of the switch hole is required|* You can use the normal side cap.
ST250 E Type -07 NJ4AA *Requires switch hole drilling|*Side caps can be used as standard. |*You need to change the direction of the brake banjo.
ST250 -07 NJ4AA Carburetor *switch hole drilling required|*Side caps can be used with stock. |*You need to change the direction of the brake banjo.
GRASS TRACKER 09-12 09-12(FI cars)*Side caps can be used with the stock ones.
GRASS TRACKER -08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
Show more
BALIUS2 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
ZEPHYRX *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
ZEPHYR750 RS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
ZEPHYR750 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
ZEPHYR400 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
ESTRELLARSCustom 96-99 *Processing of switch hole required|* Required side cap (for 18mm ID)
ZRX400II *Requires drilling of switch hole|*Applicable side cap (for 18mm dia.)|*Cannot be installed on models 05 and later due to interference with the cowl.
ZRX400 -04 *Processing to drill switch holes is required|* Required side cap (for 18mm I.D.)|*Not available for the models after 05 due to interference with the cowl.
ZRX1200R *Requires drilling of switch hole| * Requires side cap (for 18mm diameter)
ZRX1100II *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
ZRX1100 *Requires drilling of switch hole| * Requires side cap (for 18mm diameter)
W800 *Need to drill switch hole |*It is necessary to change the clutch cable.
W400 *Required Switch Hole Drilled
250TR -06 *Processing of switch holes required
Show more
XJR400R 01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter)
TW225E 00- (Disc Brake Car) *Processing of switch hole is required
TW200E 00- (Disc Brake Car) *Processing of switch hole is required
TW200E -99 (drum brakes)
TW200 -99 (drum brakes)
SR500 88-00 (CV carburetor) *Processing to drill switch holes is required
SR400 88-00 (CV carburetor) *Processing to drill switch holes is required
SR400 01-12 (Carb/FI Disc Brake Car) *Processing of switch hole is required
Show more
Product Detail
Specification:
Handlebar Color: Black
[Handlebar Specification]
Handlebar: Steel, Black/Outer Diameter Φ22.2mm/Inner Diameter Φ18mm
It is possible to use STD Cable and Hose.
[Handlebar Size]
Overall Height: 80mm
Overall Width: 645mm
Holder Mounting Part Effective Width: 165mm
Pullback Size: 145mm
Inner Angle: 45-degrees
Anteversion Angle: 120-degrees
[Handlebar Specification]
Handlebar: Steel, Black/Outer Diameter Φ22.2mm/Inner Diameter Φ18mm
It is possible to use STD Cable and Hose.
[Handlebar Size]
Overall Height: 80mm
Overall Width: 645mm
Holder Mounting Part Effective Width: 165mm
Pullback Size: 145mm
Inner Angle: 45-degrees
Anteversion Angle: 120-degrees
[Description]
Made in Japan.Prototype, installation confirmation and mass production are all under in-house management.These handlebars are made with a great deal of care and attention to detail, including careful selection of materials, several types of polishing, engraving of part numbers, high-precision bending and welding, and high-quality surface treatment, based on technology and know-how cultivated over many years in Osaka in Japan.STKM13A steel material with excellent tensile strength is used.Double anti-corrosion treatment by acrylic coating over black chrome plating.
Note
Be sure to click here for more information on the product.
Handlebar Replacement Guide
Caution
*Handle clamps (holder or post) in the photo are not included in the product.
*Sizing shown is for a horizontal position.
*An application for structural change is required for any change in body dimensions exceeding ±40mm in height and ±20mm in width from those stated in the vehicle registration.
*Images may contain other colorings/other types.
Applicable Models
HORNET250 *Need to drill switch hole
APE 50 08-12 (FI Drum Brake) *Processing of switch holes is required
APE 50 -07|08 (Carburetor)*APE100 (09-) only
APE 100 -12 (drum brake)*APE100 (09-) requires drilling of switch holes.
VTR250 03-07 MC33 (1020001-)*Processing of switch hole required|* Required side cap (for 18mm ID)
NC700S 12 (except for ABS and DCT cars) *Processing of switch hole is required|* Required side cap (for 18mm diameter)
FTR223 (with side numbers) * Requires modification of the clutch cable and choke cable.
FTR223 (without side numbers) * Requires modification of the clutch cable and choke cable.
CB750 04- RC42 *Processing of switch hole required|* Required side cap (for 18mm ID)
CB400SF -98 NC31 *Processing of switch hole required|* Required side cap (for 18mm ID)
CB400SS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
CB1300SUPER BOLDOR 10-12 *Processing of switch holes required|* Required side cap (for 18mm ID)
CB1300SUPER BOLDOR 05-09 *Processing of switch hole required|* Required side cap (for 18mm ID)
MONKEY 09-12 (AB27-1900001-)(FI)(FI cars)* Requires Top Bridge H30 Holder or MONKEY Handle Holder|* Requires drilling of switch hole
MONKEY 84-07 (Z50J-1600008-|AB27-1000001-1899999)*With Top Bridge H30 Holder or MONKEY Handle Holder required
Show more
RV200 VANVAN -07 NH41A Carburetor *Processing to open switch holes required|* The stock side caps can be used.
GSR400 -12 *Ask to drill switch holes|* Normal side caps can be used.
GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps.
GRASS TRACKER Big Boy -08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
GSX400 05-07 GK7CA *Processing of the switch hole is required|* You can use the normal side cap.
ST250 E Type -07 NJ4AA *Requires switch hole drilling|*Side caps can be used as standard. |*You need to change the direction of the brake banjo.
ST250 -07 NJ4AA Carburetor *switch hole drilling required|*Side caps can be used with stock. |*You need to change the direction of the brake banjo.
GRASS TRACKER 09-12 09-12(FI cars)*Side caps can be used with the stock ones.
GRASS TRACKER -08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
Show more
BALIUS2 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
ZEPHYRX *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
ZEPHYR750 RS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
ZEPHYR750 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
ZEPHYR400 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
ESTRELLARSCustom 96-99 *Processing of switch hole required|* Required side cap (for 18mm ID)
ZRX400II *Requires drilling of switch hole|*Applicable side cap (for 18mm dia.)|*Cannot be installed on models 05 and later due to interference with the cowl.
ZRX400 -04 *Processing to drill switch holes is required|* Required side cap (for 18mm I.D.)|*Not available for the models after 05 due to interference with the cowl.
ZRX1200R *Requires drilling of switch hole| * Requires side cap (for 18mm diameter)
ZRX1100II *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
ZRX1100 *Requires drilling of switch hole| * Requires side cap (for 18mm diameter)
W800 *Need to drill switch hole |*It is necessary to change the clutch cable.
W400 *Required Switch Hole Drilled
250TR -06 *Processing of switch holes required
Show more
XJR400R 01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter)
TW225E 00- (Disc Brake Car) *Processing of switch hole is required
TW200E 00- (Disc Brake Car) *Processing of switch hole is required
TW200E -99 (drum brakes)
TW200 -99 (drum brakes)
SR500 88-00 (CV carburetor) *Processing to drill switch holes is required
SR400 88-00 (CV carburetor) *Processing to drill switch holes is required
SR400 01-12 (Carb/FI Disc Brake Car) *Processing of switch hole is required
Show more
Universal
