Check my coupons
Product Detail
Specification:
Chain: 428 with 138 links required
Side stand replacement required
Seat rail end cut recommended
Side stand replacement required
Seat rail end cut recommended
[Description]
■Satisfactory design
The new design is based on the straight line from the old hard tail.
Choppers, bobbers, dirt racers.
The one and only bolt-on part for a chic look no matter what your style.
■Satisfactory riding performance
It is about 50mm longer than stock to improve the straight line stability.
For those who have already experienced rigid suspension, the ride quality is satisfactory.
It is designed to protect the parts that can be protected, even if it means sacrificing something.
The new design is based on the straight line from the old hard tail.
Choppers, bobbers, dirt racers.
The one and only bolt-on part for a chic look no matter what your style.
■Satisfactory riding performance
It is about 50mm longer than stock to improve the straight line stability.
For those who have already experienced rigid suspension, the ride quality is satisfactory.
It is designed to protect the parts that can be protected, even if it means sacrificing something.
Caution
stock rear fender, tail lamp, indicator, etc. cannot be installed. Please install the universal products according to the bike body.
※ If the stock frame is distorted, there is a possibility that the wheel cannot be installed straight.
The stock side stand stands up too high, so please modify or replace it according to your bike.
※ The rubber mount on the step will be removed and a solid mount will be used. The left side step is offset 9mm to the outside, so the stock back type step cannot be used as is. You will need to modify the step or replace it with a front type step.
※ If the stock frame has weld spatters, scratches, or too thick of a paint film, it may be difficult to fit the collar on the step mounting area. In this case, please use a file to remove it.
This product has no shock-reducing device, so vibration will be amplified. Please check and retighten each time you ride.
If you have increased the displacement or tuned the bike with racing carburetor, we recommend you to increase the chain size (520, 530) or adjust the reduction ratio with sprocket.
Stock bolt-on parts (Exhaust) may not be able to be installed.
※ If the stock frame is distorted, there is a possibility that the wheel cannot be installed straight.
The stock side stand stands up too high, so please modify or replace it according to your bike.
※ The rubber mount on the step will be removed and a solid mount will be used. The left side step is offset 9mm to the outside, so the stock back type step cannot be used as is. You will need to modify the step or replace it with a front type step.
※ If the stock frame has weld spatters, scratches, or too thick of a paint film, it may be difficult to fit the collar on the step mounting area. In this case, please use a file to remove it.
This product has no shock-reducing device, so vibration will be amplified. Please check and retighten each time you ride.
If you have increased the displacement or tuned the bike with racing carburetor, we recommend you to increase the chain size (520, 530) or adjust the reduction ratio with sprocket.
Stock bolt-on parts (Exhaust) may not be able to be installed.
