Check my coupons
Product Detail
Specification:
Extension: +6cm
Allowable Rear Wheel Radius R1: Approximately 225mm
Rear Suspension Mounting Length L1: Approximately 245mm
Swing arm Inner Width: 172mm +-1.0
Shift Part Width: 168mm +-1.0
Allowable Rear Wheel Radius R1: Approximately 225mm
Rear Suspension Mounting Length L1: Approximately 245mm
Swing arm Inner Width: 172mm +-1.0
Shift Part Width: 168mm +-1.0
[Description]
Extra Thick Hexagonal Cross Section & Latest type of chain adjusting mechanism.The chain adjustment mechanism has been completely improved.CNC machined parts have been fully introduced to evolve both function and design.In addition, stylish racing hooks are standard equipment.Of course, Type-G specifications are still the same, including the roller bearings in the pivot section.This weapon is described as "the best" by the manufacturer's engineers, and is a true gem.
[About the installation]
・Stock axle shafts cannot be used.
・Please prepare a long shaft with a neck length of 235mm or more.(Recommended nominal length: 240mm)
・If the gap between the frame and the swingarm is more than 0.5mm on each side, please use washers to close out the gap.
・If the pivot shaft is tightened when the gap is too large, the swingarm will be subjected to high load and may be damaged in the worst case.
[About the installation]
・Stock axle shafts cannot be used.
・Please prepare a long shaft with a neck length of 235mm or more.(Recommended nominal length: 240mm)
・If the gap between the frame and the swingarm is more than 0.5mm on each side, please use washers to close out the gap.
・If the pivot shaft is tightened when the gap is too large, the swingarm will be subjected to high load and may be damaged in the worst case.
Caution
[With regards to the Warranty]
There are cases that it occur some small scratch, rubbing and peeling of paint due to transportation problem. Please note that it is not covered by the warranty except for the defect which is inappropriate the value or function of the product. Please note that it is impossible to return the product after installation. Please decide the corresponding installation of the corresponding vehicle after checking the size on the photo.
*The chain adjuster and stand hook is a titanium color to gold due to specification changes.
There are cases that it occur some small scratch, rubbing and peeling of paint due to transportation problem. Please note that it is not covered by the warranty except for the defect which is inappropriate the value or function of the product. Please note that it is impossible to return the product after installation. Please decide the corresponding installation of the corresponding vehicle after checking the size on the photo.
*The chain adjuster and stand hook is a titanium color to gold due to specification changes.
