Quantity
Applicable Models
See All
Product Detail
Specification:
[Description]
Long wheelbase kit to offset the rear tires to the rear and lengthen the wheelbase.HONDA PCX late models (125cc / 150cc) are available.The wheelbase has been extended by 110mm to achieve good proportions with a sense of stability.The engine hanger also boasts high rigidity and durability that can be said to be over-spec, and it is designed to be safe and secure without being broken or bent.
The wheelbase has been lengthened by 110 mm to achieve both performance and style.The engine hanger has a unique H-section structure and an asymmetrical bracket design to improve the bending strength.Brake wires, accelerator wires, fuel hoses and computer harnesses can also be installed by simply changing the routing, and the cost performance is excellent.The overall style of the vehicle and the driving performance are in the best balance.
When the wheelbase is lengthened, the rear dampers are laid down and the load on the rear dampers is increased.Also, the height of the vehicle will be lowered drastically, which will affect the driving performance.To solve these problems, a bracket to offset the rear damper to the rear side is included as standard.By installing this bracket, the height of the vehicle is the same as the stock one, and the engine head is not lowered, so there is no need to worry about the trouble such as burning.
Caution
*Because the upper part of the rear damper interferes with the front side of the indicator case, it is necessary to cut the indicator case.
*When you lower the vehicle height, the engine throttle and the seat box will contact each other.If necessary, drill holes in the seat box.Also, the stock air cleaner can not be used.
Applicable Models
