Check my coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See All
G-Craft original aluminum frame for GC-019 and GC-020
Product Detail
Specification:
For NSR wheel
G-Craft: GC-019 / GC-020 frame only
Specifications: Monoshock
Swingarm pipe shape: triple square
Stabilizer: Without
Material: Aluminum 7N01 material used
G-Craft: GC-019 / GC-020 frame only
Specifications: Monoshock
Swingarm pipe shape: triple square
Stabilizer: Without
Material: Aluminum 7N01 material used
[Description]
The NSR width swingarm for GC-019 and GC-020 aluminum frame is the same width as the Monkey NSR wheel swingarm (184-187mm width).
NSR wheels can be used without modification.
The triple square pipe swingarm has a strong "figure of the eye" cross-section and is popular with over 80% of users who choose a 16cm or longer pipe.
■Option Description
[Swingarm finish]
・Black anodized finish (G-Craft part number: 60198)
・Cerakote finish (G-Craft part number: 60807)
[What is Cerakote?]
Cerakote is a special heat coloring and normal temperature paint manufactured by NIC and currently used by the US military.
It has been inspected to meet the harsh conditions, and has excellent heat resistance, abrasion resistance, durability, solvent resistance, heat dissipation, heat insulation and other performance-oriented research and production.
Ceramic is crushed by a special machine and mixed into the paint to improve the strength of the paint film.Therefore, the surface becomes pear-shaped, but the coating film can be made very thin (25 microns)
Weld marks (beads) can be left on the surface without being hidden.
The adhesion is the highest among all coating materials, and the surface treatment is suitable for frames and swingarms because it does not wrinkle even when bent, and the paint does not peel off easily even by stepping stones.
*Please allow 3 to 5 weeks for normal delivery.
[Options: Chain Slider Specifications]
Chain slider bolt fixing specification (G-Craft part number: 60228)
Change the chain slider from riveted to bolted.Easy to replace when worn out.
[Options: Additional processing of stand hook base]
Stand hook base (M6) additional processing (G-Craft part number: 60903)
G-Craft stand hook or aftermarket stand hook (M6) can be attached.
[Options: Pivot section (Φ12) specification]
Swingarm pivot part Φ12 specification (G craft part number)60898)
It is an option to make the swingarm pivot part Φ12.The frame side also needs to be Φ12.
Special shaft and nut included.
[Options: Chain pull specification]
Chain pull option
・Racing stand hook specification (G-Craft part number: 60186)
The rear part of the conventional chain pull can be used as a stand-hook.G-Craft Part Number: The 32071, 32072 and 32073 racing stand hooks can be installed.
*G Kraft Part Number:33170AP Lockheed caliper support cannot be installed (will interfere)
・Back pull type (G-Craft part number: 60221)
This backward pull adjuster is designed to eliminate the hassle of adjusting the chain.
Since the adjusting nut is located at the end of the swingarm, it is easy to adjust the adjusting part which was difficult to turn due to interference of tools
*Can not be installed on the racing stand hook specification and OW type at the same time
・OW type (G-Craft part number: 60014)
The chain puller is tapered to eliminate vertical misalignment of the axle shaft.
The tapered frame moves so there is no vertical misalignment.This mechanism is also used for swingarms of big bikes.
・OW type racing stand hook specification (G-Craft part number: 60188)
The rear part of OW type chain pull is changed to stand hook specification.
G-Craft Part Number: The 32071, 32072 and 32073 racing stand hooks can be installed.
*G Kraft Part Number:33170AP Lockheed caliper support cannot be installed (will interfere)
・Eccentric type (G-Craft part number: 60199)
This is an eccentric type chain puller commonly found on Kawasaki motorcycles.
*Only caliper supports with calipers attached to the lower part of the swingarm can be used on disc models.
*Swingarm for wide wheel can be used only with disc specification.
Note
The other swing arms for GC-019 and GC-020 are here
For standard wheels here.
For wide wheels here.
Here is for Super Wide Wheel (5.5J).
For NSR wheels here.
G-Craft GC-019 and GC-020 aluminum frames are here. * This item can not be cancelled, returned nor exchange after placing an order.
* The image is only for reference. The image shown may differ from the actual product.
Caution
*Please check the product name and the shape of the swingarm pipe as shown in the picture 3 when you order.
*This product is designed for G-Craft GC-019 / GC-020 frame only.
*Please use the rear shock for NSR50/80.(Ohlins TTX cannot be installed because it interferes with the frame)
*The sway bar will be on the bottom side.
*Image 2 shows the GC-019 frame with triple square swingarm pipe.
*Image 4 is the image of (1) black anodized finish and (2) Cerakote finish.
*Image 5 is optional: This is an image of the chain slider bolt fixing.
*Image 6 is optional: The image above shows Stand Hook Base (M6).
*Image 7 is optional: This is an image of the height adjustable suspension mount function.
*Image 8 is an image of the chain pull option.
(1) Chain adjuster: Back pull type
(2) Chain adjuster: Standard (Racing stand hook specification)
(3) Chain adjuster: OW type (Racing stand hook specification)
(4) Eccentric type
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
*This product is designed for G-Craft GC-019 / GC-020 frame only.
*Please use the rear shock for NSR50/80.(Ohlins TTX cannot be installed because it interferes with the frame)
*The sway bar will be on the bottom side.
*Image 2 shows the GC-019 frame with triple square swingarm pipe.
*Image 4 is the image of (1) black anodized finish and (2) Cerakote finish.
*Image 5 is optional: This is an image of the chain slider bolt fixing.
*Image 6 is optional: The image above shows Stand Hook Base (M6).
*Image 7 is optional: This is an image of the height adjustable suspension mount function.
*Image 8 is an image of the chain pull option.
(1) Chain adjuster: Back pull type
(2) Chain adjuster: Standard (Racing stand hook specification)
(3) Chain adjuster: OW type (Racing stand hook specification)
(4) Eccentric type
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
Applicable Models
G-Craft original aluminum frame for GC-019 and GC-020
