Check my coupons
Product Detail
Specification:
[Type] EZ-FIT Plus
[Material] Aluminum
[Specifications] 1mm UP / 8mm BACK
[Size]
Width: 730mm
Height: 46mm
Depth (pull): 122mm
Outer Diameter: 28.6/22.2mm
Product diameter: 28.6/22.2mm
Handlebar clamp outer diameter Φ28.6
Handlebar outer diameter Φ22.2
Handlebar inner diameter Φ14
Standing angle: 45 degrees
Aperture Angle: 20 degrees
[Weight] 640g
[Specification]
Hole machining: Switch hole machined
Clutch Cable (Hose) Fitting: ○
Throttle cable compatibility: ○
Brake hose fitment: ○
[Material] Aluminum
[Specifications] 1mm UP / 8mm BACK
[Size]
Width: 730mm
Height: 46mm
Depth (pull): 122mm
Outer Diameter: 28.6/22.2mm
Product diameter: 28.6/22.2mm
Handlebar clamp outer diameter Φ28.6
Handlebar outer diameter Φ22.2
Handlebar inner diameter Φ14
Standing angle: 45 degrees
Aperture Angle: 20 degrees
[Weight] 640g
[Specification]
Hole machining: Switch hole machined
Clutch Cable (Hose) Fitting: ○
Throttle cable compatibility: ○
Brake hose fitment: ○
[Description]
Easy Fit Bar is a bolt-on design.Easy to install.
Unlike the EZ-FIT, which is based on the stock model and the handlebar position has been shifted parallel, the width of the handlebar and the aperture angle have been changed to create a more comfortable riding position. It is easy to install because it is designed within the range of stock hoses and wires.
Specially designed for models with a comfortable position by moving it forward about 10mm compared to the normal position.
The width is about 30mm shorter than the standard, and the aperture angle is 2 degrees back.The height and the pull are the same as stock.End part inner diameter 14mm.
Unlike the EZ-FIT, which is based on the stock model and the handlebar position has been shifted parallel, the width of the handlebar and the aperture angle have been changed to create a more comfortable riding position. It is easy to install because it is designed within the range of stock hoses and wires.
Specially designed for models with a comfortable position by moving it forward about 10mm compared to the normal position.
The width is about 30mm shorter than the standard, and the aperture angle is 2 degrees back.The height and the pull are the same as stock.End part inner diameter 14mm.
Note
* The image is only for reference. The image shown may differ from the actual product.
Caution
*The brake hose and cables do not need to be replaced.The stock handlebar ends will not work.
