Check my coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Product Detail
Specification:
Type: Gundam
LCD Side Color: Silver
Back Side Color: Blue
Bolt Collar: Red / yellow
Material: A2017 material duralumin made by Furukawa-Sky
Size: Width 71 x Height 143 x Thickness 10 (mm)
Weight: 17g
Made in Japan
Supported Models: For iPhone 6/6s
[Set components]
・Case body 1 set
・Wrench 1pc.
・4 Torx bolts + 1 spare
・10 elastomers (shock absorbers)
・User's Manual
LCD Side Color: Silver
Back Side Color: Blue
Bolt Collar: Red / yellow
Material: A2017 material duralumin made by Furukawa-Sky
Size: Width 71 x Height 143 x Thickness 10 (mm)
Weight: 17g
Made in Japan
Supported Models: For iPhone 6/6s
[Set components]
・Case body 1 set
・Wrench 1pc.
・4 Torx bolts + 1 spare
・10 elastomers (shock absorbers)
・User's Manual
[Description]
Duralumin machined case for iPhone6/6s in collaboration with the popular anime "Mobile Suit Gundam".
This special model is a solid bumper case for iPhone 6/6s machined from solid high-strength duralumin, which is used for aircraft and automobile parts, based on the concept of "protecting your smartphone seriously".
The material used is A2017 duralumin made by Furukawa-Sky.
It is a strong material with good machinability.
95% of solid high-rigidity duralumin is machined into an aluminum case while maintaining its strength.
This time, we will start to sell the solid bumper case and the aluminum back protection panel which can be changed according to your mood.
The panels are carved from solid aluminum, and the surface is finely engraved with special laser markers to bring out the images of Gundam and Zaku.
Everything about the GILD Design aluminum case is made in Japan, including the materials, surface treatment, bolts that hold the case in place, the included silicone, wrenches, and the packaging box.
This thorough commitment to "Made in Japan" leads to the confidence of high quality cases that our customers can use with confidence.
Please experience the "high quality" that can only be obtained by using reliable Japanese products.
The case with the motif of the mobile suit "Gundam" is silver on the LCD side, blue on the back side, and the bolt is a combination of red and yellow.
This special model is a solid bumper case for iPhone 6/6s machined from solid high-strength duralumin, which is used for aircraft and automobile parts, based on the concept of "protecting your smartphone seriously".
The material used is A2017 duralumin made by Furukawa-Sky.
It is a strong material with good machinability.
95% of solid high-rigidity duralumin is machined into an aluminum case while maintaining its strength.
This time, we will start to sell the solid bumper case and the aluminum back protection panel which can be changed according to your mood.
The panels are carved from solid aluminum, and the surface is finely engraved with special laser markers to bring out the images of Gundam and Zaku.
Everything about the GILD Design aluminum case is made in Japan, including the materials, surface treatment, bolts that hold the case in place, the included silicone, wrenches, and the packaging box.
This thorough commitment to "Made in Japan" leads to the confidence of high quality cases that our customers can use with confidence.
Please experience the "high quality" that can only be obtained by using reliable Japanese products.
The case with the motif of the mobile suit "Gundam" is silver on the LCD side, blue on the back side, and the bolt is a combination of red and yellow.
Caution
*Solid Bumper Case does not come with a back protection panel.
*This product is designed exclusively for iPhone6/6s.
*Because this product is made of aluminum, radio waves will be blocked from the back of the main body. There is a possibility that the performance of receiving radio waves is slightly inferior.
*This product is not designed to completely protect your iPhone from shocks.
We are not responsible for any damage to the iPhone, failure, loss, or loss of data.
*This product is designed to prevent the iPhone from contacting with the case by using shock-absorbing resin, but it is not designed to completely protect the iPhone from scratches.
*Please understand beforehand that we cannot assume any responsibility for any damage to iPhone caused by installing this product.
*The specifications, appearance, and included products of the product are subject to change without notice.
*You may not be able to use aftermarket chargers or earphones (earphone jack is 8.5mm in diameter).
*We recommend the thickness of the film to be less than 0.2mm.
*Some types of aftermarket film may cause problems such as lifting of the film.
*It may be difficult to receive the signal in the place where the signal condition is not good. If you are receiving a normal signal, there is no problem.
*Due to the characteristics of the anodizing process, it is difficult to finish the same color for each lot.
We try to keep the same color as much as possible, but due to the anodizing process, the color may vary from lot to lot.
*Because this product is anodized, the contact point where the electric current passes through is not colored.
There are two points on the inside of the case that are not colored, but it is not a defect in processing.
*Although we have made every effort to make the product photos as close as possible to the actual color of the product, you may notice a change in color depending on your computer monitor, color settings, indoor lighting, sunlight, and other factors.
*Images may contain other types.
*This product is designed exclusively for iPhone6/6s.
*Because this product is made of aluminum, radio waves will be blocked from the back of the main body. There is a possibility that the performance of receiving radio waves is slightly inferior.
*This product is not designed to completely protect your iPhone from shocks.
We are not responsible for any damage to the iPhone, failure, loss, or loss of data.
*This product is designed to prevent the iPhone from contacting with the case by using shock-absorbing resin, but it is not designed to completely protect the iPhone from scratches.
*Please understand beforehand that we cannot assume any responsibility for any damage to iPhone caused by installing this product.
*The specifications, appearance, and included products of the product are subject to change without notice.
*You may not be able to use aftermarket chargers or earphones (earphone jack is 8.5mm in diameter).
*We recommend the thickness of the film to be less than 0.2mm.
*Some types of aftermarket film may cause problems such as lifting of the film.
*It may be difficult to receive the signal in the place where the signal condition is not good. If you are receiving a normal signal, there is no problem.
*Due to the characteristics of the anodizing process, it is difficult to finish the same color for each lot.
We try to keep the same color as much as possible, but due to the anodizing process, the color may vary from lot to lot.
*Because this product is anodized, the contact point where the electric current passes through is not colored.
There are two points on the inside of the case that are not colored, but it is not a defect in processing.
*Although we have made every effort to make the product photos as close as possible to the actual color of the product, you may notice a change in color depending on your computer monitor, color settings, indoor lighting, sunlight, and other factors.
*Images may contain other types.
