Check my coupons
Product Detail
Specification:
[Set components]
・Machined caliper support
・Machined torque rod
・Torque Rod Mount (or Torque Rod Mount Plate) Main Unit
・Machined caliper support
・Machined torque rod
・Torque Rod Mount (or Torque Rod Mount Plate) Main Unit
[Description]
Brembo calipers can be installed on almost all wheels, including aftermarket wheels such as Marvic, Gale speed, Marghesini, Mag Forge, and stock wheels!!!
A rear brake kit that combines Brembo 2-pot calipers with machined caliper supports and machined aluminum torque rods mounted on the frame.
Please prepare caliper, brake hose, crush washer, banjo bolt for Brembo and brake fluid separately.
A rear brake kit that combines Brembo 2-pot calipers with machined caliper supports and machined aluminum torque rods mounted on the frame.
Please prepare caliper, brake hose, crush washer, banjo bolt for Brembo and brake fluid separately.
Caution
*Calipers are not included.Please purchase separately if you need it.
*The image above is for GPZ900R.
*The air will not be completely released when the caliper is in the downward position.As shown in image 3, be sure to move the caliper to the upper part of the disc and temporarily fix it with cable ties to prevent it from falling before releasing the air.
*Please be sure to bleed the air with the brake disc in between.
*In the case of stock wheels, there may be problems due to compatibility, but aftermarket wheels can be installed without problems.
・ZEPHYR 1100 stock wheels: Need little adjustment
・ZEPHYR 1100RS stock wheels: 〇
・ZZR1100C stock wheels: Need little adjustment
・ZX-10 stock wheels: Not available
・GPZ1100 stock wheels: Not available
Not available: Not fit.
△: It can be installed by cutting the back side of the caliper.(See image 4)
Available: It fits fine.
*The image above is for GPZ900R.
*The air will not be completely released when the caliper is in the downward position.As shown in image 3, be sure to move the caliper to the upper part of the disc and temporarily fix it with cable ties to prevent it from falling before releasing the air.
*Please be sure to bleed the air with the brake disc in between.
*In the case of stock wheels, there may be problems due to compatibility, but aftermarket wheels can be installed without problems.
・ZEPHYR 1100 stock wheels: Need little adjustment
・ZEPHYR 1100RS stock wheels: 〇
・ZZR1100C stock wheels: Need little adjustment
・ZX-10 stock wheels: Not available
・GPZ1100 stock wheels: Not available
Not available: Not fit.
△: It can be installed by cutting the back side of the caliper.(See image 4)
Available: It fits fine.
Applicable Models
ZZR1100D
