- Home
- Tools
- Hand tools
- Screwdriver Bits
- SK11
- SK11: Raceway Triple Socket
Check my coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Product Detail
Specification:
[Material]
・Body: Steel
・Wrench mounting part: nitrile rubber
[Product Specifications]
Sockets (Hex) Size: 8, 13, 17mm
Shaft Diameter: 6.35mm hexagonal shaft
Bit Cutting Edge: +2・+2
Compatible with18V Impact
[Standard] BS3-81317RN
・Body: Steel
・Wrench mounting part: nitrile rubber
[Product Specifications]
Sockets (Hex) Size: 8, 13, 17mm
Shaft Diameter: 6.35mm hexagonal shaft
Bit Cutting Edge: +2・+2
Compatible with18V Impact
[Standard] BS3-81317RN
[Description]
This triple socket can be used with an impact driver and a spectacle ratchet, etc., and can also be used to attach a raceway ductor.
[Use]
Raceway installation.
[Product Features]
Triple sockets are equipped with the most suitable sizes for equipment installation, and can fit into narrow ducts.
W3/8 bolt nuts in the raceway ductor can be tightened without difficulty using a 17mm socket with two sides split.
If you install a bit of 110mm or more and turn it upside down, you can turn a bolt and nut of 8mm on its opposite side.
The drive shaft is replaceable, so if the shaft breaks, you can use your 75mm or larger bits.
It can be attached to both power tool and hand tool wrenches.
[Use]
Raceway installation.
[Product Features]
Triple sockets are equipped with the most suitable sizes for equipment installation, and can fit into narrow ducts.
W3/8 bolt nuts in the raceway ductor can be tightened without difficulty using a 17mm socket with two sides split.
If you install a bit of 110mm or more and turn it upside down, you can turn a bolt and nut of 8mm on its opposite side.
The drive shaft is replaceable, so if the shaft breaks, you can use your 75mm or larger bits.
It can be attached to both power tool and hand tool wrenches.
Caution
*When attaching to a spectacle ratchet, be sure to use a 13mm dodecagonal socket.In particular, please do not install it in a hexagonal socket as it may cause damage.
*Do not place near fire or in high temperature place.Please use the product safely after confirming the installation method and compatible tools.
*Lubricate the slide as necessary if it is not moving properly.Please do not disassemble and remodel it because it is dangerous.Before use, be sure to inspect the O-ring type nitrile rubber for rust, deformation, scratches or deterioration.
*Do not place near fire or in high temperature place.Please use the product safely after confirming the installation method and compatible tools.
*Lubricate the slide as necessary if it is not moving properly.Please do not disassemble and remodel it because it is dangerous.Before use, be sure to inspect the O-ring type nitrile rubber for rust, deformation, scratches or deterioration.
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/