Check my coupons
Product Detail
Specification:
[Color] Buffed
[Size] Same as Stock (330 x 520 x 280)
[Size] Same as Stock (330 x 520 x 280)
[Description]
[Product Description]
Aluminum swing arm with high rigidity and low weight for stable turning performance
■Original Main Arm
The unique cross-sectional shape and material thickness balance the rigidity and lightness required for the swing arm.
The elaborate bending process and buffing finish give it an unparalleled presence.
The swingarm is made with the utmost attention to detail and functionality that can only be achieved by in-house production.
■Original design for easy maintenance.
The chain adjuster is a special adjuster that can be easily adjusted with a hexagonal wrench for easy daily maintenance.
■High-precision bending process and beautiful surface finish
Polygonal cross-sectional pipe with excellent rigidity is used. Elaborate bending process and beautiful buffing finish are applied to give a sufficient presence as dress-up.
The machined aluminum chain adjuster is hard-anodized to improve wear resistance and surface hardness.
With Lazer Marking Logo.
■Adoption of stabilizer
By using the stabilizer on the swing arm, it is possible to increase the rigidity of the swing arm while utilizing the characteristics of the swing arm, and it is possible to suppress the behavior of the bike when turning and input from the road.
It also enhances the sense of custom when installed.
■Fender bracket for the stock rear inner fender is included.
The swingarm is equipped with a bracket to hold the stock rear inner fender, which can be attached to the swingarm by cutting a portion of the inner fender.
■The length of the swing arm is the same as the stock length, so there is no need to change the number of links of the drive chain.
■The stock chain slider can be used without modification.
Aluminum swing arm with high rigidity and low weight for stable turning performance
■Original Main Arm
The unique cross-sectional shape and material thickness balance the rigidity and lightness required for the swing arm.
The elaborate bending process and buffing finish give it an unparalleled presence.
The swingarm is made with the utmost attention to detail and functionality that can only be achieved by in-house production.
■Original design for easy maintenance.
The chain adjuster is a special adjuster that can be easily adjusted with a hexagonal wrench for easy daily maintenance.
■High-precision bending process and beautiful surface finish
Polygonal cross-sectional pipe with excellent rigidity is used. Elaborate bending process and beautiful buffing finish are applied to give a sufficient presence as dress-up.
The machined aluminum chain adjuster is hard-anodized to improve wear resistance and surface hardness.
With Lazer Marking Logo.
■Adoption of stabilizer
By using the stabilizer on the swing arm, it is possible to increase the rigidity of the swing arm while utilizing the characteristics of the swing arm, and it is possible to suppress the behavior of the bike when turning and input from the road.
It also enhances the sense of custom when installed.
■Fender bracket for the stock rear inner fender is included.
The swingarm is equipped with a bracket to hold the stock rear inner fender, which can be attached to the swingarm by cutting a portion of the inner fender.
■The length of the swing arm is the same as the stock length, so there is no need to change the number of links of the drive chain.
■The stock chain slider can be used without modification.
Note
[Components]
Swing Arm Assy. x 1
Chain Adjuster Comp. x 2 (44303-HXS-T12)
Bracket Stopper x 1 (52130-BR1-T00)
Bracket 1 x 1 (40511-BR1-T00)
Bracket 2 x 1 (40512-BR1-T00)
Bracket 3 x 1 (40513-BR1-T00)
Rear Wheel, Axle x 1 (00-06-0108)
Socket Cap Screw (12x70) x 1 (00-00-0675)
Flat Head Socket Screw (6x25) x 2 (00-00-0120)
Flat Head Socket Screw (6x35) x 1 (00-00-0581)
Plain Washer (12mm) (12.5x22x2.3) x 1 (00-00-0443)
Washer (13x24x2.5) x 1 (00-00-0167)
Pan Screw (5x12) x 4 (00-00-0600)
Flat Head Screw (5x15) x 2 (00-00-0612)
*If there's no link to the repair parts, please quote us through Non-listed Item quotation
[Documents]
Manual: Japanese
[Online Catalog]
SP Takegawa's Online Catalog (Japanese)
Swing Arm Assy. x 1
Chain Adjuster Comp. x 2 (44303-HXS-T12)
Bracket Stopper x 1 (52130-BR1-T00)
Bracket 1 x 1 (40511-BR1-T00)
Bracket 2 x 1 (40512-BR1-T00)
Bracket 3 x 1 (40513-BR1-T00)
Rear Wheel, Axle x 1 (00-06-0108)
Socket Cap Screw (12x70) x 1 (00-00-0675)
Flat Head Socket Screw (6x25) x 2 (00-00-0120)
Flat Head Socket Screw (6x35) x 1 (00-00-0581)
Plain Washer (12mm) (12.5x22x2.3) x 1 (00-00-0443)
Washer (13x24x2.5) x 1 (00-00-0167)
Pan Screw (5x12) x 4 (00-00-0600)
Flat Head Screw (5x15) x 2 (00-00-0612)
*If there's no link to the repair parts, please quote us through Non-listed Item quotation
[Documents]
Manual: Japanese
[Online Catalog]
SP Takegawa's Online Catalog (Japanese)
Caution
- When installing the stock rear inner fender on the aluminum swingarm, it needs to cut off some of the interference.
- Drive sprocket must be 30T or less and drive sprocket must be 15T or less. If you use a sprocket with more than the specified number of sprockets, the stabilizer and drive chain will interfere with each other.
- This product is only for model with the listed model and frame numbers. It cannot be installed on any other model.
- This instruction manual is intended for people with basic skills and knowledge. If you are not experienced in installation or do not have the necessary tools, please do not install the product, and ask a designated or certified factory to install it.
- It is possible to install a stock chain case, but it needs to modify the chain case to fit.
- Use a stock rear shock or one made by SP Takegawa. If you use a rear shock with a short damper stroke or a low spring load, the swingarm will be subjected to unpredictable loads and will be damaged.
- Use less than 15 sprockets for the drive (front) sprocket and less than 30 sprockets for the driven (rear) sprocket. If more than the specified number of sprockets are used, the drive chain may interfere with the stabilizer part of the swingarm. Also, please adjust the drive chain regularly. If the drive chain is loose, it may interfere with the stabilizer part of the swingarm.
- Drive sprocket must be 30T or less and drive sprocket must be 15T or less. If you use a sprocket with more than the specified number of sprockets, the stabilizer and drive chain will interfere with each other.
- This product is only for model with the listed model and frame numbers. It cannot be installed on any other model.
- This instruction manual is intended for people with basic skills and knowledge. If you are not experienced in installation or do not have the necessary tools, please do not install the product, and ask a designated or certified factory to install it.
- It is possible to install a stock chain case, but it needs to modify the chain case to fit.
- Use a stock rear shock or one made by SP Takegawa. If you use a rear shock with a short damper stroke or a low spring load, the swingarm will be subjected to unpredictable loads and will be damaged.
- Use less than 15 sprockets for the drive (front) sprocket and less than 30 sprockets for the driven (rear) sprocket. If more than the specified number of sprockets are used, the drive chain may interfere with the stabilizer part of the swingarm. Also, please adjust the drive chain regularly. If the drive chain is loose, it may interfere with the stabilizer part of the swingarm.
