- Home
- Motorcycle Parts
- Electrical
- Meters
- Tachometers
- MINIMOTO
- MINIMOTO: Tachometer 12000 RPM Display
Check my coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See All
4Cycle Single Cylinder (Every time ignition Type)
Product Detail
Specification:
[Color] Dial: Black
[Specification]
Gauge: 12000RPM
Dial: Φ60
Display Lighting: LED White (The dial itself emits light.)
Reference Installation Time: Approximately 40mins.
[Specification]
Gauge: 12000RPM
Dial: Φ60
Display Lighting: LED White (The dial itself emits light.)
Reference Installation Time: Approximately 40mins.
[Description]
[Features]
This tachometer can be installed on the handlebars and front fork top bolts of Monkey, Gorilla and Dax.
The 12000RPM display is easy to read and is suitable for stock vehicles and custom 88cc bores.
White LEDs are used for backlighting.It gives off a brilliant light.
The pickup wire is wrapped around the plug cord.
The waterproof design can withstand rainy weather.
[Reference case]
Very easy to install! Bolt on to the upper bolt of the top bridge!
Bolt holes for M10 diameter are provided on the tachometer bracket (if you are concerned about impact when driving, a rubber type shock absorber is recommended).
There are 4 wires in total.
[Variety of wirings]
Red: DC power supply (for MONKEY Z50J 12V ignition to red)
Green: Grounding (MONKEY Z50J 12V: Earthing to Black)
Yellow: LED lighting (for Monkey Z50J 12V headlight LOW to white)
Green: Tachometer pulse (for Monkey Z50J 12V secondary coil -> black/yellow) or more 4 pcs
*Interrupting parts sold at home centers are useful for each wiring connection.
*All wiring can be done behind the headlights.
*It is convenient to purchase an extension wire for the tachometer wiring, and to interrupt the tachometer wiring with a branching connector.
This tachometer can be installed on the handlebars and front fork top bolts of Monkey, Gorilla and Dax.
The 12000RPM display is easy to read and is suitable for stock vehicles and custom 88cc bores.
White LEDs are used for backlighting.It gives off a brilliant light.
The pickup wire is wrapped around the plug cord.
The waterproof design can withstand rainy weather.
[Reference case]
Very easy to install! Bolt on to the upper bolt of the top bridge!
Bolt holes for M10 diameter are provided on the tachometer bracket (if you are concerned about impact when driving, a rubber type shock absorber is recommended).
There are 4 wires in total.
[Variety of wirings]
Red: DC power supply (for MONKEY Z50J 12V ignition to red)
Green: Grounding (MONKEY Z50J 12V: Earthing to Black)
Yellow: LED lighting (for Monkey Z50J 12V headlight LOW to white)
Green: Tachometer pulse (for Monkey Z50J 12V secondary coil -> black/yellow) or more 4 pcs
*Interrupting parts sold at home centers are useful for each wiring connection.
*All wiring can be done behind the headlights.
*It is convenient to purchase an extension wire for the tachometer wiring, and to interrupt the tachometer wiring with a branching connector.
Caution
*The models with which the product is not compatible: 6V vehicles, point ignition engines, CDI systems with control signals, battery-less vehicles, vehicles with weak batteries, plug caps without registers, vehicles using super plugs.Injection vehicle (FI Monkey 09-).
Applicable Models
4Cycle Single Cylinder (Every time ignition Type)
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/