Compatible with Smartphone Ball joint diameter 23mm
■Sizes Compatible for Installation When the minimum width is 57mm: Length 122-150mm When the maximum width is 88mm: Length 146-175mm
[Description]
As the bike is designed to be leaned forward, the height of the bike is kept as low as possible. The smooth finish in every detail that can only be achieved with machined aluminum does not allow for any compromise. It's not only for navigation, but also for lap measurement and camera shooting.
Stem nut (bolt) replacement type A collar / bracket for offset is included to prevent interference with the key cylinder when mounted on the PANIGALE.
Caution
*Images may contain other colors. *To install this product, it is necessary to remove the top bridge from the vehicle and replace the stock stem nut with this product. *The following special tool is required to remove the stock stem nut, so please ask a shop with expertise to install this product. *A 27mm hex socket tool is required to install AELLA stem bolts.DUCATI Steering Stem Socket Wrench: 8871 31 058 *This product is designed to attach a universal smartphone holder (TM-C004 sold separately) and the plate is specially designed for this purpose. *The dimensions are for reference only and the usable range may vary by about 3mm depending on the thickness and rectangular shape of the unit. *It may not fit for iPhone Plus size with thick case.In addition, please note that it may cause the product to fall off. *Only TM-C004 has been tested for fitting. *Inquiries about the installation of other products are not accepted. *Stock navigation is not available. *If you already have this product and want to use the stock navigation, you can use it by replacing the top plate only. *There may be changes in product specifications due to the manufacturer's reasons.
