- Home
- Model
- SUZUKI 251 - 400cc
- GS400
- Motorcycle Parts
- Engine Parts
- Engine
- Tappet Shim
- BRC
- BRC: OEM Tappet Shim (T2.45)
Check my coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See All
GS400E 77-79
Product Detail
Specification:
Compatible Stock Part Number: 12892-45006
Quantity: 1 sheet
Outer Diameter: 29.5mm
Thickness: 2.45mm
Quantity: 1 sheet
Outer Diameter: 29.5mm
Thickness: 2.45mm
[Description]
This product is a shim required when adjusting the tappet of the engine.
These shims are available in thicknesses from 2.15 to 3.10, but the shims that come with your new vehicle are thicker so that they can be adjusted.
Therefore, since the gap is to be adjusted by replacing the shim with a thinner one, BRC has shims in the rnage of 2.15-2.55 which are commonly used.
The shims that were originally installed in the engine are heat-treated and do not wear out, so they can be reused.
To determine the shim size, measure the gap between the tappet shim and the camshaft at the T mark and apply the thickness of the original shim and the valve clearance value.Therefore, a stock service manual is required.
These shims are available in thicknesses from 2.15 to 3.10, but the shims that come with your new vehicle are thicker so that they can be adjusted.
Therefore, since the gap is to be adjusted by replacing the shim with a thinner one, BRC has shims in the rnage of 2.15-2.55 which are commonly used.
The shims that were originally installed in the engine are heat-treated and do not wear out, so they can be reused.
To determine the shim size, measure the gap between the tappet shim and the camshaft at the T mark and apply the thickness of the original shim and the valve clearance value.Therefore, a stock service manual is required.
Caution
*The original shims in the engine are also heat-treated so they will not wear out and can be reused.
*To identify the shim size, measure the gap between the tappet shim and camshaft to the T-mark, then apply the thickness of the original shim and the valve clearance value.Therefore, a stock service manual is required.
*There may be changes in product specifications due to the manufacturer's reasons.
*To identify the shim size, measure the gap between the tappet shim and camshaft to the T-mark, then apply the thickness of the original shim and the valve clearance value.Therefore, a stock service manual is required.
*There may be changes in product specifications due to the manufacturer's reasons.
Applicable Models
GS400E 77-79
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/