Check my coupons
Product Detail
Specification:
[Material] Polycarbonate
[Size]
Length x Width: 150mm x 250mm
Approximately 115mm:80mm
Thickness:3mm
[Size]
Length x Width: 150mm x 250mm
Approximately 115mm:80mm
Thickness:3mm
[Description]
A handguard that protects the rider's fists and fingertips from the running wind.
The shield body is made of polycarbonate, and the color can be selected from clear and smoke.
The mounting bracket with sufficient strength is a special product designed to prevent rattling even when it receives high wind pressure.
The clutch side is prevented from rotating by inserting a bracket into the gap of the holder.
The brake side has a bracket shape that matches the shape of the master cylinder.
•Guyra Gauntlet
A handguard that protects the rider's fists and fingertips from the running wind.
Gauntlet means armor kimono, and gauntlet is a part of Western armor that protects the arm from fingertips.
It is the armor worn on a motorcycle and is the only aero protection that protects the fingertips of riders who require delicate operation.
3mm thick polycarbonate with excellent durability is used for the shield body that draws a complicated curved surface.
The high transparency does not impair the lightness around the steering wheel.
Sufficiently strong mounting bracket designed for each model are chrome-plated or black-painted.
It has a shape that does not rattle even when it receives high wind pressure, and it is a bolt-on design for compatible motorcycle.
Highly durable stainless steel screws, polycarbonate washers, and locknuts are used to attach the shield.
•Design that does not impair the balance of the motorcycle's body
By giving the handle guard body a depth of 80 mm, a clearance that does not make you feel cramped around the lever is secured.
In addition, the shape that wraps around below the lever gives windproof performance not only to the fist but also to the fingertips.
A special cut line is set for each model so that the maximum windbreak effect can be obtained without interfering with the necessary safety parts.
•Easy bolt-on design on the mirror holder
Installation is quick and easy because it is only necessary to tighten the left and right mirrors together.
The mounting bracket also serves as a detent with a special shape that matches the area around the brakes and clutches of each motorcycle.
Therefore, it is firmly fixed while being fixed at one point.
Since it is designed on the assumption that it will be installed on a normal motorcycle, it may not be installed or a sufficient windproof effect may not be obtained if changes are made around the handle such as the master cylinder.
•Select clear or smoke according to your preference
The clear specification gives a refreshing impression without impairing the lightness around the handle, and the smoke specification gives a tight impression.
The shield body is made of polycarbonate, and the color can be selected from clear and smoke.
The mounting bracket with sufficient strength is a special product designed to prevent rattling even when it receives high wind pressure.
The clutch side is prevented from rotating by inserting a bracket into the gap of the holder.
The brake side has a bracket shape that matches the shape of the master cylinder.
•Guyra Gauntlet
A handguard that protects the rider's fists and fingertips from the running wind.
Gauntlet means armor kimono, and gauntlet is a part of Western armor that protects the arm from fingertips.
It is the armor worn on a motorcycle and is the only aero protection that protects the fingertips of riders who require delicate operation.
3mm thick polycarbonate with excellent durability is used for the shield body that draws a complicated curved surface.
The high transparency does not impair the lightness around the steering wheel.
Sufficiently strong mounting bracket designed for each model are chrome-plated or black-painted.
It has a shape that does not rattle even when it receives high wind pressure, and it is a bolt-on design for compatible motorcycle.
Highly durable stainless steel screws, polycarbonate washers, and locknuts are used to attach the shield.
•Design that does not impair the balance of the motorcycle's body
By giving the handle guard body a depth of 80 mm, a clearance that does not make you feel cramped around the lever is secured.
In addition, the shape that wraps around below the lever gives windproof performance not only to the fist but also to the fingertips.
A special cut line is set for each model so that the maximum windbreak effect can be obtained without interfering with the necessary safety parts.
•Easy bolt-on design on the mirror holder
Installation is quick and easy because it is only necessary to tighten the left and right mirrors together.
The mounting bracket also serves as a detent with a special shape that matches the area around the brakes and clutches of each motorcycle.
Therefore, it is firmly fixed while being fixed at one point.
Since it is designed on the assumption that it will be installed on a normal motorcycle, it may not be installed or a sufficient windproof effect may not be obtained if changes are made around the handle such as the master cylinder.
•Select clear or smoke according to your preference
The clear specification gives a refreshing impression without impairing the lightness around the handle, and the smoke specification gives a tight impression.
Applicable Models
