Check my coupons
Product Detail
Specification:
[Material] Super lightweight stainless steel pipe polished finish
[Maintenance Data]
・Drain bolt: Available
・Filter: Available
■Made in Japan
[Maintenance Data]
・Drain bolt: Available
・Filter: Available
■Made in Japan
[Description]
Your CB250R will be changed drastically by changing only one pipe.
With this box, the torque is as strong as if the displacement was increased.
Wide power band for higher gear riding.
Instant danger avoidance. Nimble footwork.
The top gear for long distance riding.
Just by changing one of these pipes, the perfection of your CB250R will be increased tremendously.
SP Tadao has been particular about the exhilarating ride in this rpm range, which is usually used from 2500 to 5000rpm.
Combine with the POWER BOX silencer for an even higher level of performance!
With this box, the torque is as strong as if the displacement was increased.
Wide power band for higher gear riding.
Instant danger avoidance. Nimble footwork.
The top gear for long distance riding.
Just by changing one of these pipes, the perfection of your CB250R will be increased tremendously.
SP Tadao has been particular about the exhilarating ride in this rpm range, which is usually used from 2500 to 5000rpm.
Combine with the POWER BOX silencer for an even higher level of performance!
Caution
*SP Tadao defines the trque as "From around 20 or 30km/h to around 60km/h, the extremely low speed range frequently used on public roads".It is defined as "the power to push the vehicle forward and accelerate, and the tenacity not to jerk when riding in a particularly high gear".
(Only when installing it on an applicable model)
*2018- When the CB250R POWERBOX PIPE and POWERBOX are installed as a set, the optional collar to adjust the clearance of the insertion part (part number: CB2-OC-01) is required.
(Only when installing it on an applicable model)
*2018- When the CB250R POWERBOX PIPE and POWERBOX are installed as a set, the optional collar to adjust the clearance of the insertion part (part number: CB2-OC-01) is required.
