Check my coupons
Product Detail
Specification:
[Specification]
・Rated voltage: DC12V
・Power consumption: 20W
・Color temperature: 6000k
・Use LED: CREE XLamp XP-L LEDs
・Manufacturer's model of the light emitting part: LB7-KN
・13-18 Dedicated kit for BMW F700GS LED headlight bulb Lo beam side
・Bolt-on installation of the kit for specific models
・H7 Single Type
・With inspection certificate
・Equipped with bulb-out warning indicator canceller
・Rated voltage: DC12V
・Power consumption: 20W
・Color temperature: 6000k
・Use LED: CREE XLamp XP-L LEDs
・Manufacturer's model of the light emitting part: LB7-KN
・13-18 Dedicated kit for BMW F700GS LED headlight bulb Lo beam side
・Bolt-on installation of the kit for specific models
・H7 Single Type
・With inspection certificate
・Equipped with bulb-out warning indicator canceller
[Description]
●Long life!
It has a longer life than H.I.D.
●Power-saving design!
Power consumption is 20W, so it is more energy saving than general H7 halogen bulb (12v 55w).
●Reliable CREE LED!
Durable and reliable CREE XLamp XP-L LEDs are used for the light emitter.
●To prevent bulb out warning!
Equipped with a campus decoder, the bulb-out warning display does not occur.
●Bright and quick lighting!
Unlike HID, it lights up with full power immediately after power-on.Also, the color of the light does not change gradually like HID.
●Waterproof cooling fan is adopted!Always bright with a reliable cooling system!
The heat derived by the LED is transmitted to the heat sink without loss and cooled by the waterproof cooling fan, so the bright light of 20W full power will last without being affected by the heat even if it is lit for a long time.
Caution
[Notes]
*This product is only for 12V DC Minus Common.Be sure to use DC12V as the power source for wiring.
*Please do not connect to the AC headlight, which is common in small displacement vehicles.
*Minus common refers to the type in which the negative side of the headlight wiring is common to both the Hi beam side and Lo beam side.Not compatible with vehicles with positive common headlights.
*This product is for motorcycles only, so cannot be used on four-wheeled vehicles.
*Do not cover with paper or cloth and do not light near flammable materials.Failure to do so may result in fire or abnormal heating.Also, do not light near flammable items such as flammable spray, thinner, etc. or items that may ignite.
*Do not install to the headlight with the light on.Failure to do so may result in malfunction or burns.
*This product is waterproof for daily life, but it is not completely waterproof.Wrap the coupler coming out of the controller unit with vinyl tape or self-bonding tape, or use caulking agent to waterproof it.Avoid wetting the product with more water than necessary.
*When washing a vehicle with a high pressure washer, please do not let the high pressure wash directly hit this product.
*Please do not drop the LED bulb or controller unit, or give it a strong shock.It not only causes breakage, deterioration of performance and shortening of service life, but also causes injury.
*Be sure to apply the included silicone grease when assembling the LED bulb.Please refer to this manual for details.
*Do not touch the LED chip when it is off or on.
*Do not cover up the waterproof cooling fan.Make sure that there is enough space behind the fan for the sucked air to flow.
*The waterproof cooling fan has a specific orientation for installation.Be sure to install with the silver round seal facing outward.
*Use a thread locker to prevent loosening of the threaded part.Periodic retightening is also recommended.
*Installation requires expertise and skill.Please have it done at a designated maintenance facility with skilled mechanics.
*Please adjust the optical axis before use.It may obstruct the view of oncoming vehicles and cause traffic accidents.
*PROTEC is not responsible for any damage or accident caused by the use of this product.Protec will not be responsible for any labor charges or other costs incurred during repair.
*If you feel any abnormality during installation or use, please contact your dealer or PROTEC service department.
After installing the product, be sure to adjust the optical axis using an inspection machine that is compatible with LED (new light source).PROTEC is not responsible for any dirt or clouding of the light lens, scratches, peeling of the reflector plating inside the light, or poor maintenance due to poor optical axis adjustment or age-related deterioration.
*This product is only for 12V DC Minus Common.Be sure to use DC12V as the power source for wiring.
*Please do not connect to the AC headlight, which is common in small displacement vehicles.
*Minus common refers to the type in which the negative side of the headlight wiring is common to both the Hi beam side and Lo beam side.Not compatible with vehicles with positive common headlights.
*This product is for motorcycles only, so cannot be used on four-wheeled vehicles.
*Do not cover with paper or cloth and do not light near flammable materials.Failure to do so may result in fire or abnormal heating.Also, do not light near flammable items such as flammable spray, thinner, etc. or items that may ignite.
*Do not install to the headlight with the light on.Failure to do so may result in malfunction or burns.
*This product is waterproof for daily life, but it is not completely waterproof.Wrap the coupler coming out of the controller unit with vinyl tape or self-bonding tape, or use caulking agent to waterproof it.Avoid wetting the product with more water than necessary.
*When washing a vehicle with a high pressure washer, please do not let the high pressure wash directly hit this product.
*Please do not drop the LED bulb or controller unit, or give it a strong shock.It not only causes breakage, deterioration of performance and shortening of service life, but also causes injury.
*Be sure to apply the included silicone grease when assembling the LED bulb.Please refer to this manual for details.
*Do not touch the LED chip when it is off or on.
*Do not cover up the waterproof cooling fan.Make sure that there is enough space behind the fan for the sucked air to flow.
*The waterproof cooling fan has a specific orientation for installation.Be sure to install with the silver round seal facing outward.
*Use a thread locker to prevent loosening of the threaded part.Periodic retightening is also recommended.
*Installation requires expertise and skill.Please have it done at a designated maintenance facility with skilled mechanics.
*Please adjust the optical axis before use.It may obstruct the view of oncoming vehicles and cause traffic accidents.
*PROTEC is not responsible for any damage or accident caused by the use of this product.Protec will not be responsible for any labor charges or other costs incurred during repair.
*If you feel any abnormality during installation or use, please contact your dealer or PROTEC service department.
After installing the product, be sure to adjust the optical axis using an inspection machine that is compatible with LED (new light source).PROTEC is not responsible for any dirt or clouding of the light lens, scratches, peeling of the reflector plating inside the light, or poor maintenance due to poor optical axis adjustment or age-related deterioration.
