Check my coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See All
MONKEY125 Thailand Model (MLHJB02)
MONKEY125 JB02-1000001
Product Detail
Specification:
[Included Parts]
Connecting Tube for Standard Throttle Body
Sensor Bracket
Connecting Tube for Standard Throttle Body
Sensor Bracket
[Description]
The "Air Filter Kit" improves power performance by significantly increasing the intake effect.
This product is an air filter kit that can be installed directly to the stock throttle body by removing the stock air cleaner box.
By installing SP Takekawa's down exhaust on a stock engine vehicle and installing this product, you will be able to increase the power output in the high RPM range even more than when the exhaust was replaced.
The kit is supplied with a connecting tube for stock throttle bodies, the length and position of which have been determined on the basis of test data to be appropriate without affecting the inhalation effect.
The main body of the air filter is equipped with a blow-by union, which can be connected to the blow-by hose using the supplied union or hose.
The kit comes with a sensor bracket to fix the sensor installed on the stock air cleaner box.
It is possible to install with SP Takegawa's R. Side Cover and Oil Catch Tank Kit.
Installing SP Takegawa's Oil Cooler Kit which fixes the oil cooler body to the frame can be done
By installing this product, the stock air cleaner box can be removed and the SP Takegawa oil cooler kit, which fixes the oil cooler body to the frame, can be installed.
In order to install this oil cooler kit, you need to install SP Takekawa S-stage Big Bore Kit 181cc or SP Takekawa Special Clutch Cover at the same time.
For vehicles equipped with the S-stage, use the oil outlet on the cylinder. For special clutch covers, use the oil outlet on the cover.
The configuration and part number of the SP Takegawa oil cooler kit differs depending on the oil outlet.
This product is an air filter kit that can be installed directly to the stock throttle body by removing the stock air cleaner box.
By installing SP Takekawa's down exhaust on a stock engine vehicle and installing this product, you will be able to increase the power output in the high RPM range even more than when the exhaust was replaced.
The kit is supplied with a connecting tube for stock throttle bodies, the length and position of which have been determined on the basis of test data to be appropriate without affecting the inhalation effect.
The main body of the air filter is equipped with a blow-by union, which can be connected to the blow-by hose using the supplied union or hose.
The kit comes with a sensor bracket to fix the sensor installed on the stock air cleaner box.
It is possible to install with SP Takegawa's R. Side Cover and Oil Catch Tank Kit.
Installing SP Takegawa's Oil Cooler Kit which fixes the oil cooler body to the frame can be done
By installing this product, the stock air cleaner box can be removed and the SP Takegawa oil cooler kit, which fixes the oil cooler body to the frame, can be installed.
In order to install this oil cooler kit, you need to install SP Takekawa S-stage Big Bore Kit 181cc or SP Takekawa Special Clutch Cover at the same time.
For vehicles equipped with the S-stage, use the oil outlet on the cylinder. For special clutch covers, use the oil outlet on the cover.
The configuration and part number of the SP Takegawa oil cooler kit differs depending on the oil outlet.
Note
[Components]
Air Filter Comp. x 1
Tube (5x125) x 1 (00-09-0009)
Hose Clamp (Φ9.5) x 2 (00-00-0216)
Hose Connector with Different Diameter 6-8 x 1 (00-00-0220)
Socket Cap Screw (5x16) x 2 (00-00-0713)
Flange Socket Cap Screw (6x12) x 1 (00-00-0923)
Flange U Nut (5mm) x 2 (00-00-0922)
Sensor Bracket x 1
Cable Tie (150mm) x 2 (00-00-0135)
*If there's no link to the repair parts, please quote us through Non-listed Item quotation
[Documents]
Manual: Japanese
[Online Catalog]
SP Takegawa's Online Catalog (Japanese)
Air Filter Comp. x 1
Tube (5x125) x 1 (00-09-0009)
Hose Clamp (Φ9.5) x 2 (00-00-0216)
Hose Connector with Different Diameter 6-8 x 1 (00-00-0220)
Socket Cap Screw (5x16) x 2 (00-00-0713)
Flange Socket Cap Screw (6x12) x 1 (00-00-0923)
Flange U Nut (5mm) x 2 (00-00-0922)
Sensor Bracket x 1
Cable Tie (150mm) x 2 (00-00-0135)
*If there's no link to the repair parts, please quote us through Non-listed Item quotation
[Documents]
Manual: Japanese
[Online Catalog]
SP Takegawa's Online Catalog (Japanese)
Caution
- This product cannot be installed together with stock exhaust system or SP Takegawa's up exhaust system (sports exhaust system / RS sports exhaust system).
- This product is for models with down exhaust.
- When installing with other engine parts made by SP Takegawa, it needs to set up with FI-CON TYPE-e or TYPE-X.
- This product is only for model with the listed model and frame numbers. It cannot be installed on any other model.
- When installing the product, please refer to the genuine service manual for the applicable model mentioned and perform the work securely. However, the service manual is intended for people with basic skills and knowledge, so if you do not have the skills and knowledge, you may not be able to assemble the kit correctly or you may damage the parts. If you do not have experience in installation, or if you do not have the necessary tools, skill and knowledges, we recommend that you contact a technically qualified store.
- Reuse bolts and nuts, but do not reuse bolts and nuts that are badly worn or damaged; always use new ones.
- Cannot be used with stock exhaust system, SP Takegawa's sports exhaust system, or RS sports exhaust system due to interference.
- This product is compatible with stock throttle bodies. Not compatible with big throttle bodies.
- Depending on the engine specifications, it may be necessary to purchase the FI-CON TYPE-e separately.
- Depending on the engine specifications, SP Takegawa's injectors may be required separately.
- This product is for models with down exhaust.
- When installing with other engine parts made by SP Takegawa, it needs to set up with FI-CON TYPE-e or TYPE-X.
- This product is only for model with the listed model and frame numbers. It cannot be installed on any other model.
- When installing the product, please refer to the genuine service manual for the applicable model mentioned and perform the work securely. However, the service manual is intended for people with basic skills and knowledge, so if you do not have the skills and knowledge, you may not be able to assemble the kit correctly or you may damage the parts. If you do not have experience in installation, or if you do not have the necessary tools, skill and knowledges, we recommend that you contact a technically qualified store.
- Reuse bolts and nuts, but do not reuse bolts and nuts that are badly worn or damaged; always use new ones.
- Cannot be used with stock exhaust system, SP Takegawa's sports exhaust system, or RS sports exhaust system due to interference.
- This product is compatible with stock throttle bodies. Not compatible with big throttle bodies.
- Depending on the engine specifications, it may be necessary to purchase the FI-CON TYPE-e separately.
- Depending on the engine specifications, SP Takegawa's injectors may be required separately.
Applicable Models
MONKEY125 Thailand Model (MLHJB02)
MONKEY125 JB02-1000001
