Rear Caliper Support (Brembo 2POT & Stock Rotor Diameter Compatible)
- Product number: 30100075BN
-
- |
- 4.7
- (27 reviews)
Check my coupons
Product Detail
Specification:
[Specification]
・Stock master diameter: Φ14
・Caliper installation position [Stock]: Upper
・Caliper installation position [ACTIVE]: under
・Stock rotor outer diameter: Φ190
[Compatible caliper]
■A
・20.6950.21
・20.6950.22
・20.6951.60
・20.6951.22
・20.B278.10
■B
・20.5161.43
・20.5161.51
■C
・120.A441.10
・120.A441.30
・120.A441.40
■D
・20.B581.11
・20.B851.53
・20.B852.10
・20.B852.52
・20.B852.70
・20.B852.73
・Stock master diameter: Φ14
・Caliper installation position [Stock]: Upper
・Caliper installation position [ACTIVE]: under
・Stock rotor outer diameter: Φ190
[Compatible caliper]
■A
・20.6950.21
・20.6950.22
・20.6951.60
・20.6951.22
・20.B278.10
■B
・20.5161.43
・20.5161.51
■C
・120.A441.10
・120.A441.30
・120.A441.40
■D
・20.B581.11
・20.B851.53
・20.B852.10
・20.B852.52
・20.B852.70
・20.B852.73
[Description]
This caliper support is required when changing to GALE SPEED / brembo 2POT calipers.
This is a machined aluminum piece with a simple shape that blends in with the vehicle and caliper.
This is a machined aluminum piece with a simple shape that blends in with the vehicle and caliper.
Note
* The image is only for reference. The image shown may differ from the actual product.
Caution
*The caliper that can be used differs depending on the model.Please check the "Compatible calipers" of each product part number.
*The brake hose must be replaced before installation.Please use the order hose system and prepare it separately.
*The pad area is smaller than the stock caliper.
*The disc contact surface of the brake pad needs to be machined.
*Due to caliper error, the caliper may contact the stock wheel hub.
*Images may contain other products.
*There may be changes in product specifications due to manufacturer's reasons.
*The brake hose must be replaced before installation.Please use the order hose system and prepare it separately.
*The pad area is smaller than the stock caliper.
*The disc contact surface of the brake pad needs to be machined.
*Due to caliper error, the caliper may contact the stock wheel hub.
*Images may contain other products.
*There may be changes in product specifications due to manufacturer's reasons.
Applicable Models
GROM 13-20
