Check my coupons
Product Detail
Specification:
[Collar]Matte Black
[Description]
Compared to the stock handlebar parts, the new one for Rebel 250 / Rebel 500 which has been moved back about 65mm in front and up 10mm to make it easier to ride with a new color "matte black (no gloss)" has appeared!
The matte black (no gloss) color fits the gear and heartbeat of the REBEL and emphasizes its originality!Stock wires and harnesses can be used as it is.
The matte black (no gloss) color fits the gear and heartbeat of the REBEL and emphasizes its originality!Stock wires and harnesses can be used as it is.
Caution
*This product is approximately 65mm back and 3mm lower in height than the stock handle.
*The overall width is -5mm at the end of the stock lever.(Overall width:±20mm/overall height:±40mm) No structural change is required.
*There is no need to change the hose/harness/wire for this product, but if you are concerned about it, please change the brake hose to the appropriate length. Please adjust the tension of the axle wire because of the change of handling.
*There is an error in the thickness of the paint on this product. When you turn the axle side, it may be dull. In this case, it is necessary to adjust the throttle sleeve side of the handlebar by shaving with a file.
*The punch marks on this product are for reference only. Please adjust the position of the handle to your liking.
*There is a case that the hole of the switch box of this product is slightly out of alignment. In such a case, it may be necessary to modify it by widening the hole. If you are a person who is finicky about the bolt-on installation, or you are nervous about the labor cost and process, we recommend you to consult with Honda Dream shop in advance.
*Please note that the product specification may change due to manufacturer reasons.
*The overall width is -5mm at the end of the stock lever.(Overall width:±20mm/overall height:±40mm) No structural change is required.
*There is no need to change the hose/harness/wire for this product, but if you are concerned about it, please change the brake hose to the appropriate length. Please adjust the tension of the axle wire because of the change of handling.
*There is an error in the thickness of the paint on this product. When you turn the axle side, it may be dull. In this case, it is necessary to adjust the throttle sleeve side of the handlebar by shaving with a file.
*The punch marks on this product are for reference only. Please adjust the position of the handle to your liking.
*There is a case that the hole of the switch box of this product is slightly out of alignment. In such a case, it may be necessary to modify it by widening the hole. If you are a person who is finicky about the bolt-on installation, or you are nervous about the labor cost and process, we recommend you to consult with Honda Dream shop in advance.
*Please note that the product specification may change due to manufacturer reasons.
Applicable Models
