Check my coupons
Product Detail
Specification:
[Type]RACING
[Material/Material]6061Aluminum with CNCMachining process,Delrin resin
[Material/Material]6061Aluminum with CNCMachining process,Delrin resin
[Description]
Front Axle Slider Set specially designed for each model Racing Type.
This type of wheel is easy to maintain and less troublesome to remove and install.
Recommended for riders who mainly ride on the circuit and frequently change wheels.
Protects axle nuts and fork bottoms which are easily damaged in a fall.
Manufactured from 6061 aluminum and Delrin resin, CNC machined front and rear.
・To prevent damage to the vehicle body when it falls over
・Specially designed for each model to ensure a perfect fit
・The front is a right and left split type, which improves serviceability compared to the conventional through-shaft type
・A choice of colors allows you to dress up your vehicle
・The plastic slider is replaceable.Slider is also available by 1pc.
Two-piece front slider construction.
The shaft side(right side when viewed from the direction of travel) is like an anchor bolt or a bar end of a handguard. When the slider mounting bolt is tightened, it expands in the shaft and the slider is locked.
On the axle nut side, the slider itself is a nut, and you can tighten the nut with a spanner.
Conventional sliders were designed to go through the axle shaft and the slider had to be removed every time the wheel was removed.
However, with this slider, you don't have to do that and you can remove the front wheel as same as the axle without slider.
Please use the spare slider for SMR.
This type of wheel is easy to maintain and less troublesome to remove and install.
Recommended for riders who mainly ride on the circuit and frequently change wheels.
Protects axle nuts and fork bottoms which are easily damaged in a fall.
Manufactured from 6061 aluminum and Delrin resin, CNC machined front and rear.
・To prevent damage to the vehicle body when it falls over
・Specially designed for each model to ensure a perfect fit
・The front is a right and left split type, which improves serviceability compared to the conventional through-shaft type
・A choice of colors allows you to dress up your vehicle
・The plastic slider is replaceable.Slider is also available by 1pc.
Two-piece front slider construction.
The shaft side(right side when viewed from the direction of travel) is like an anchor bolt or a bar end of a handguard. When the slider mounting bolt is tightened, it expands in the shaft and the slider is locked.
On the axle nut side, the slider itself is a nut, and you can tighten the nut with a spanner.
Conventional sliders were designed to go through the axle shaft and the slider had to be removed every time the wheel was removed.
However, with this slider, you don't have to do that and you can remove the front wheel as same as the axle without slider.
Please use the spare slider for SMR.
Note
* The image is only for reference. The image shown may differ from the actual product.
Caution
*Please note that the product specification may change due to manufacturer reasons.
