Check my coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See All
KATANA 1000cc
DL1000 V-STROM250
Hayabusa
BURGMAN400
GSF1200
GSR250
BANDIT1200
BANDIT1250F
INAZUMA400
INAZUMA1200
SKYWAVE
GSX1400
GSX-S750
GSX-S1000
GSR750
DR-Z400SM
GSX-S1000F
SV650
SV650X
DL1000 V-STROM1050 The taller the better, but the sole floats when the cover is applied.
DL1000 V-STROM650 The taller the better, but the sole floats when the cover is applied.
Jigzer SF250
Jigzer 250
Jigzer 150
GSX-R1000R ABS
GSX250R
GSX400
Show more
VTR1000F
VT400S
VT750S
DN-01
Integra
FUSION
Silver wingGT400
Silver wingGT600
CBR 650R
CBR 1000RR
CB 650R
CB 1000R
CB1300 SUPER FOUR
NC750X
NT1100
VFR800X
VRX Roadster
FORESIGHTEX
400X
X11
X4
X-ADV
FORZA
FAZE
REBEL250
CB750
REBEL1100
REBEL500
CB1100EX
CB1100RS
VFR1200F
VFR800F
CB1300 SUPER BOLDOR
CB400 SUPER BOLDOR
CB400 SUPER FOUR
CBR 400R
Show more
MEGURO K3
VERSYS-X 250 TOURER
Ninja H2 SX SE
Ninja 1000SX
Z900 RS CAFE
Z900 RS
Z900 RS SE
W800 STREET
W800
ZRX1200 DAEG
Z650RS
W800 CAFE
Ninja 400
Ninja 650
VERSYS 1000 SE Tall enough to float when covered.
VERSYS 650 Tall enough to float when covered.
Z H2
Z900 SE
Z H2 SE
Z1000
Z900
Ninja ZX-25R SE
Ninja 250
Ninja ZX-25R
Ninja H2 CARBON
Ninja ZX-10RR
Ninja ZX-10R
Ninja ZX-4RR
Ninja ZX-6R
Z650
Show more
FJR1300AS
TRACER9 GT
MT-10
FZ1
MAXAM
XMAX
XJR1300
FJR1300A
SEROW250
TMAX The taller the better, but the sole floats when the cover is applied.
Show more
Product Detail
Specification:
Color] Gunmetalic & Silver
[Material]
polyester
Acrylic silver coating / Acrylic gunmetal coating
Protection against deterioration of motorcycles due to ultraviolet rays Anti-theft Protection of motorcycles Rain protection Dust protection
Accessories] Main unit cover, belt
[Place of production] China
Manufacturer] OKUBO MFG.
[Material]
polyester
Acrylic silver coating / Acrylic gunmetal coating
Protection against deterioration of motorcycles due to ultraviolet rays Anti-theft Protection of motorcycles Rain protection Dust protection
Accessories] Main unit cover, belt
[Place of production] China
Manufacturer] OKUBO MFG.
[Description]
■Product Features
・It only takes 10 seconds to call
・Orange handles and zipper make it easy to see the front and back of the cover
・The inside of the cover is made of a heat-resistant cotton material with a temperature of about 360 degrees Celsius.No need to wait for the engine to cool down
・Once squeezed, the sole squeezing function does not require adjustment
・With a belt for wind-skipping prevention and cover storage → space-saving cover storage!No more soiling the cover when storing it!
■ Put it on and feel it!Bike cover that can be put on a bike in 10 seconds
Just take the orange handle and rear zipper and quickly put it over the front of the bike, then just pull it on.
Just pull it backwards to apply the cover securely, so there's no need to spread it out like a flap!!!
It can be applied in 10 seconds with no wasted motion.
When the cover is placed in a crumpled position, it is difficult to tell the front and back of the cover, and it is necessary to spread it out.
With this bike cover, you don't have to unfold the cover, with orange handles and zippers that are easily visible through the silver fabric!
You can tell the front and back at a glance.
Cotton fabric with a heat resistance temperature of approximately 360 degrees is used so that the exhaust pipe, which is actually hotter than the exhaust, can come in contact with it.
While other companies' heat-resistant motorcycle covers use cotton fabric at an angle, focusing on the area where the exhaust hits, this motorcycle cover covers the area that gets hot and prevents the cover from melting and sticking to the exhaust.
Many bike covers should have a center buckle to prevent wind skipping.
However, the cover may melt by sticking to the engine parts, or by touching the hot parts where the cotton fabric is not attached....
Above all, it's very cumbersome to put on and take off!
In order to shorten the time required for this, a function is adopted that allows the bottom to taper so that once it is tightened, there is no need to loosen it again.
With the conventional thread-squeeze function of the bike cover, it is necessary to loosen the cover each time it is put on or taken off.
With this bike cover, the rear zipper allows the cover to be attached and detached even with the soffit closed.
It's a hassle to put locks on both the front and rear lock holes... If this is the case, you can attach a belt to one of the locking holes to prevent the wind from blowing off.
Bike covers are large, so many people have trouble finding a place to store them.
In an apartment or condominium, the only place to put a bicycle is on the balcony of your room or on the ground of a shared bicycle parking lot....
But if you put it on the ground, it gets so dirty with sand and dust that the next time you use the cover, the dirt gets on the bike and the cover is useless!
The attached belt can be used to put them together to save space and keep them in a place where the cover will not get dirty.
The cover can be hung on a clothesline when wet, so it can be hung to dry properly.
Other features include air vents to prevent steam inside the cover, a 40mm diameter lock hole for motorcycle security, and over 90% UV protection!
It has many features, including a water-repellent 300D thick fabric!
■How to care for the product
・To protect the water-repellent effect of the fabric, please do not use a washing machine or wring it out.
・For stains, rinse with lukewarm water or water, or wipe with a cloth dampened with diluted neutral detergent and squeeze tightly.
・If the cover is left with dust or dirt on it for a long period of time, the water repellent effect will be lost.
・It only takes 10 seconds to call
・Orange handles and zipper make it easy to see the front and back of the cover
・The inside of the cover is made of a heat-resistant cotton material with a temperature of about 360 degrees Celsius.No need to wait for the engine to cool down
・Once squeezed, the sole squeezing function does not require adjustment
・With a belt for wind-skipping prevention and cover storage → space-saving cover storage!No more soiling the cover when storing it!
■ Put it on and feel it!Bike cover that can be put on a bike in 10 seconds
Just take the orange handle and rear zipper and quickly put it over the front of the bike, then just pull it on.
Just pull it backwards to apply the cover securely, so there's no need to spread it out like a flap!!!
It can be applied in 10 seconds with no wasted motion.
When the cover is placed in a crumpled position, it is difficult to tell the front and back of the cover, and it is necessary to spread it out.
With this bike cover, you don't have to unfold the cover, with orange handles and zippers that are easily visible through the silver fabric!
You can tell the front and back at a glance.
Cotton fabric with a heat resistance temperature of approximately 360 degrees is used so that the exhaust pipe, which is actually hotter than the exhaust, can come in contact with it.
While other companies' heat-resistant motorcycle covers use cotton fabric at an angle, focusing on the area where the exhaust hits, this motorcycle cover covers the area that gets hot and prevents the cover from melting and sticking to the exhaust.
Many bike covers should have a center buckle to prevent wind skipping.
However, the cover may melt by sticking to the engine parts, or by touching the hot parts where the cotton fabric is not attached....
Above all, it's very cumbersome to put on and take off!
In order to shorten the time required for this, a function is adopted that allows the bottom to taper so that once it is tightened, there is no need to loosen it again.
With the conventional thread-squeeze function of the bike cover, it is necessary to loosen the cover each time it is put on or taken off.
With this bike cover, the rear zipper allows the cover to be attached and detached even with the soffit closed.
It's a hassle to put locks on both the front and rear lock holes... If this is the case, you can attach a belt to one of the locking holes to prevent the wind from blowing off.
Bike covers are large, so many people have trouble finding a place to store them.
In an apartment or condominium, the only place to put a bicycle is on the balcony of your room or on the ground of a shared bicycle parking lot....
But if you put it on the ground, it gets so dirty with sand and dust that the next time you use the cover, the dirt gets on the bike and the cover is useless!
The attached belt can be used to put them together to save space and keep them in a place where the cover will not get dirty.
The cover can be hung on a clothesline when wet, so it can be hung to dry properly.
Other features include air vents to prevent steam inside the cover, a 40mm diameter lock hole for motorcycle security, and over 90% UV protection!
It has many features, including a water-repellent 300D thick fabric!
■How to care for the product
・To protect the water-repellent effect of the fabric, please do not use a washing machine or wring it out.
・For stains, rinse with lukewarm water or water, or wipe with a cloth dampened with diluted neutral detergent and squeeze tightly.
・If the cover is left with dust or dirt on it for a long period of time, the water repellent effect will be lost.
Caution
Bike covers are consumable items.Deterioration over time is inevitable.If the fabric becomes torn, etc., please replace it with a new product.
This product is also intended to prevent theft, but it does not completely do so.
*Durability may be impaired by natural phenomena such as ultraviolet rays and acid rain, as well as by usage conditions.
*Do not scratch the product with sharp objects or other sharp protrusions.
*Do not leave in the hot sun.The inside may become hot and adversely affect the car body.
Do not use near fire.This product is not nonflammable.
*Water repellent treatment is applied to the fabric, but it will gradually weaken.Use a commercially available water repellent spray if necessary.
*Water-repellent treatment is applied to the fabric, but it is not completely waterproof because it is a sewn product.Please dry the cover frequently, as leaving it in a wet condition may cause discoloration, rainwater intrusion, or other adverse effects on the cover itself.
*Do not cover a wet or dirty bike as it is.This can cause deterioration of the paint and rusting.
*Please remove large receivers (backrests), antennas, etc. before use.
*Images may contain other sizes.
*Moped scooters, 3-wheeled motorcycles, adventure vehicles, and competition vehicles are not compatible.
*Some motorcycles are so tall that the sole floats when the cover is applied.
*There may be changes in product specifications due to manufacturer's reasons.
This product is also intended to prevent theft, but it does not completely do so.
*Durability may be impaired by natural phenomena such as ultraviolet rays and acid rain, as well as by usage conditions.
*Do not scratch the product with sharp objects or other sharp protrusions.
*Do not leave in the hot sun.The inside may become hot and adversely affect the car body.
Do not use near fire.This product is not nonflammable.
*Water repellent treatment is applied to the fabric, but it will gradually weaken.Use a commercially available water repellent spray if necessary.
*Water-repellent treatment is applied to the fabric, but it is not completely waterproof because it is a sewn product.Please dry the cover frequently, as leaving it in a wet condition may cause discoloration, rainwater intrusion, or other adverse effects on the cover itself.
*Do not cover a wet or dirty bike as it is.This can cause deterioration of the paint and rusting.
*Please remove large receivers (backrests), antennas, etc. before use.
*Images may contain other sizes.
*Moped scooters, 3-wheeled motorcycles, adventure vehicles, and competition vehicles are not compatible.
*Some motorcycles are so tall that the sole floats when the cover is applied.
*There may be changes in product specifications due to manufacturer's reasons.
Applicable Models
KATANA 1000cc
DL1000 V-STROM250
Hayabusa
BURGMAN400
GSF1200
GSR250
BANDIT1200
BANDIT1250F
INAZUMA400
INAZUMA1200
SKYWAVE
GSX1400
GSX-S750
GSX-S1000
GSR750
DR-Z400SM
GSX-S1000F
SV650
SV650X
DL1000 V-STROM1050 The taller the better, but the sole floats when the cover is applied.
DL1000 V-STROM650 The taller the better, but the sole floats when the cover is applied.
Jigzer SF250
Jigzer 250
Jigzer 150
GSX-R1000R ABS
GSX250R
GSX400
Show more
VTR1000F
VT400S
VT750S
DN-01
Integra
FUSION
Silver wingGT400
Silver wingGT600
CBR 650R
CBR 1000RR
CB 650R
CB 1000R
CB1300 SUPER FOUR
NC750X
NT1100
VFR800X
VRX Roadster
FORESIGHTEX
400X
X11
X4
X-ADV
FORZA
FAZE
REBEL250
CB750
REBEL1100
REBEL500
CB1100EX
CB1100RS
VFR1200F
VFR800F
CB1300 SUPER BOLDOR
CB400 SUPER BOLDOR
CB400 SUPER FOUR
CBR 400R
Show more
MEGURO K3
VERSYS-X 250 TOURER
Ninja H2 SX SE
Ninja 1000SX
Z900 RS CAFE
Z900 RS
Z900 RS SE
W800 STREET
W800
ZRX1200 DAEG
Z650RS
W800 CAFE
Ninja 400
Ninja 650
VERSYS 1000 SE Tall enough to float when covered.
VERSYS 650 Tall enough to float when covered.
Z H2
Z900 SE
Z H2 SE
Z1000
Z900
Ninja ZX-25R SE
Ninja 250
Ninja ZX-25R
Ninja H2 CARBON
Ninja ZX-10RR
Ninja ZX-10R
Ninja ZX-4RR
Ninja ZX-6R
Z650
Show more
FJR1300AS
TRACER9 GT
MT-10
FZ1
MAXAM
XMAX
XJR1300
FJR1300A
SEROW250
TMAX The taller the better, but the sole floats when the cover is applied.
Show more
Model Page Links
- Rebel 250
- FUSION (HELIX, SPAZIO, CN250)
- FAZE250
- Silver Wing GT400
- CB400SF (Super Four)
- VRX400 ROADSTER
- VT400S
- CB400X
- CBR400R
- CB400SB (Super Bol D'or)
- Rebel 500
- Silver Wing GT600
- DN-01
- X-ADV
- CB750
- VT750S Shadow
- NC750X
- NC750 Integra
- VFR800X CROSS RUNNER
- VFR800F
- CB1000R (2018-)
- CBR1000RR Fireblade
- VTR1000F Firestorm (SuperHawk)
- CB1100 RS
- X11 (CB1100SF)
- CB1100EX
- VFR1200F
- CB1300SF (Super Four)
- X4
- CB1300SB (Super Bol D'or, CB1300S)
- CB650R
- CBR650R
- Rebel 1100
- NT1100
- XMAX250
- SEROW250
- MAXAM (Morphous, CP250)
- MT-10 (FZ-10)
- FZ1 (FZ1N)
- FJR1300 AS
- FJR1300 A
- XJR1300
- TRACER9 GT
- GIXXER
- GSX250R
- V-STROM 250
- GSR250 (GW250, INAZUMA)
- BURGMAN 400
- DR-Z400Sm
- GSX400
- Inazuma400 (GSX400 Inazuma)
- SV650X
- SV650
- V-STROM 650 (DL650)
- GSX-S 750
- GSR750
- GSX-S1000
- GSX-S1000F
- GSX-R1000R
- Bandit1200 (GSF1200)
- GSF1200 (Bandit)
- INAZUMA1200 (GSX1200)
- Bandit1250F (GSX1250F)
- GSX1300R HAYABUSA
- GSX1400
- KATANA
- GIXXER 250
- GIXXER 250 SF
- V-STROM 1050
