Check my coupons
Product Detail
[Description]
The Z1R slim seat base is available in carbon.
The Z1R is said to have the worst footprint in the Z series.
If a seat is fabricated using this slim seat as a base, the footing will be greatly improved.
In this case, please adjust the height and angle of the seat hinge (in the case of Mk2), or adjust the height of the mounting bracket and hook.
1. Place the slim seat on the place where the stock seat was removed.If I can get it on without a problem
2. Attach the seat fitting to the front and back of the frame bracket for the horizontal opening.At this time, loosen the fitting mounting bolts and leave them temporarily installed.therefore
If there is a problem such as it doesn't close properly, it lifts up and closes, or it hits the tail cowl tightly, you need to adjust the height of the fitting.
If the installation is successful, go to step 3.
3. Install the rubber cushion on the back of the seat.therefore
If the seat is distorted or lifted, the rubber cushion needs to be adjusted.It is necessary to adjust the height so that it hits on average.
If there is no problem, you are done.
The brackets and rubbers on the back side can be ported for use.
The Z1R is said to have the worst footprint in the Z series.
If a seat is fabricated using this slim seat as a base, the footing will be greatly improved.
In this case, please adjust the height and angle of the seat hinge (in the case of Mk2), or adjust the height of the mounting bracket and hook.
1. Place the slim seat on the place where the stock seat was removed.If I can get it on without a problem
2. Attach the seat fitting to the front and back of the frame bracket for the horizontal opening.At this time, loosen the fitting mounting bolts and leave them temporarily installed.therefore
If there is a problem such as it doesn't close properly, it lifts up and closes, or it hits the tail cowl tightly, you need to adjust the height of the fitting.
If the installation is successful, go to step 3.
3. Install the rubber cushion on the back of the seat.therefore
If the seat is distorted or lifted, the rubber cushion needs to be adjusted.It is necessary to adjust the height so that it hits on average.
If there is no problem, you are done.
The brackets and rubbers on the back side can be ported for use.
Note
* This product will be made after an order, We will notice currect shipping time after we recieve an order.
Caution
*Adjustments such as seat-finishing height adjustment may be necessary when installing the product.Please understand that FRP and carbon sheets may not fit well as they are, even if your previous stock fits.In most cases, the installation can be done without problems by adjustment.
*Please note that this product is handmade one by one, so it will take some time for delivery.
*The seat may warp or the gap between the tail cowl and the body may be too tight when the Mk2 / Z1R is just installed due to the compatibility with the body.
*If the seat is not long enough, there may be something wrong with that bike.
*Custom-made seats may not fit due to bike body error.
*Images may contain other types.
*There may be changes in product specifications due to the manufacturer's reasons.
*Please note that this product is handmade one by one, so it will take some time for delivery.
*The seat may warp or the gap between the tail cowl and the body may be too tight when the Mk2 / Z1R is just installed due to the compatibility with the body.
*If the seat is not long enough, there may be something wrong with that bike.
*Custom-made seats may not fit due to bike body error.
*Images may contain other types.
*There may be changes in product specifications due to the manufacturer's reasons.
Applicable Models
Z1R
