Check my coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See All
iPhone 14 Pro
Product Detail
Specification:
[Material]
・Body: A2017S
・Bolt: stainless steel
[Size] 77mm (W) x 153mm (H) x 11mm (D)
[Body weight] 19g
[Product Components]
・Case body 1 set
・5 Torx bolts (including 1 spare bolt)
・5 shock absorbers (including 1 spare)
・5 O-rings (including 1 spare)
Rattle Prevention Kit" (packaged separately)
・3 Torx bolts 7.5mm (including 1 spare)
・Aluminum shim 2mm, 3 pieces (including 1 spare piece)
・Aluminum shim 1mm, 3 pieces (including 1 spare piece)
・Body: A2017S
・Bolt: stainless steel
[Size] 77mm (W) x 153mm (H) x 11mm (D)
[Body weight] 19g
[Product Components]
・Case body 1 set
・5 Torx bolts (including 1 spare bolt)
・5 shock absorbers (including 1 spare)
・5 O-rings (including 1 spare)
Rattle Prevention Kit" (packaged separately)
・3 Torx bolts 7.5mm (including 1 spare)
・Aluminum shim 2mm, 3 pieces (including 1 spare piece)
・Aluminum shim 1mm, 3 pieces (including 1 spare piece)
[Description]
The concept of "protecting customers' smartphones" has remained unchanged over the past 12 years since we began developing cases for the iPhone.
The case for the iPhone 14 series was also designed and manufactured under the theme of "easier to use and better protection".
The case is made of solid duralumin called "A2017" which is used for aviation, space and racing parts.
We use A2017S duralumin made by Furukawa-Sky (now UACJ Co., Ltd.), which is said to be the highest quality among them.
The protrusion of the four corners of the Solid Bumper is not a mere design feature, but is a necessary thickness to absorb the impact from the four corners when the product is dropped.
These four corners play a major role in protecting your smartphone.
This lightweight and rigid case is precision machined from solid duralumin to protect your iPhone from external shocks.
We have designed the part where the bumper touches the finger so that there is no uncomfortable feeling.
You can also operate the frequently used swipe smoothly.
The bumper for the iPhone 14 Pro model has a wider windshield opening than previous bumpers, which allows for the use of many commercially available protective glass films.
(The protective glass film mounting area (internal dimensions) of the bumper for the 14 Pro is 68mm wide and 144.1mm long.)
A lens guard bar is available as a new option.(Only for 14 Pro/14 Pro Max)
You can choose the lens protection method that best suits your TPO.
If the lens is placed directly on a flat surface, it will not come in contact with the lens.
A duralumin machined lens guard for 14 Pro/14 Pro Max is also available as an option.
You can protect your precious lens.
The bumper can be used with Apple's original MagSafe charger as well as many other aftermarket MagSafe accessories without any interference.
(Bumper in the image is for iPhone 14 Pro, accessory is a card holder made by MOFT.)
Aluminum shims and longer bolts (7.5mm) are included to eliminate rattling when placed on a flat surface.
Use according to your situation.
Strap holes are standard.
A strap can be attached to the bottom left of the front so it won't get in the way during calls.
You can put it in your pocket smoothly.
The bumper does not hide the antenna module part.
Everything is open and 5G can be used without any problem.
Collar bolt set (sold separately) (Model no: GI-305) can also be used for iPhone 14 series compatible cases since the bolt size is the same.
■About Qi Wireless Chargers
The iPhone 14 series compatible solid bumper can be charged with a Qi-enabled wireless charger.(Note 1)
■WIFI, 4G, 5G, MagSafe, Bluetooth, GPS, NFC
There is no problem with FaceID -> face registration, unlocking.
ApplePay -> No problem in normal use.(Note 2)
Wifi: No problem in normal use.(Note 2)
5G → No problem in normal use.(Note 2)
4G → No problem in normal use.(Note 2)
Bluetooth → No problem in normal use.(Note 2)
GPS → No problem in normal use.(Note 2)
MagSafe → No problem in normal use.
■About Protective Glass Film for iPhone 14 Pro
The solid bumper for iPhone 14 Pro is wider than GILD design's previous bumpers and can be used with a wide range of commercial products.
iPhone 14 Pro Protective Glass Film Installation Area (Internal Dimensions) → Width 68mm, Height 144.1mm
■Recommended protective glass film
Belkin protective glass film (model no: OVA109zz)
Product name: Belkin Protective Glass Film for iPhone 14 Pro with Tempered Glass
Made by Asahi Glass AGC Japan, 0.33mm, set of 2 with easy installation kit, clear
The case for the iPhone 14 series was also designed and manufactured under the theme of "easier to use and better protection".
The case is made of solid duralumin called "A2017" which is used for aviation, space and racing parts.
We use A2017S duralumin made by Furukawa-Sky (now UACJ Co., Ltd.), which is said to be the highest quality among them.
The protrusion of the four corners of the Solid Bumper is not a mere design feature, but is a necessary thickness to absorb the impact from the four corners when the product is dropped.
These four corners play a major role in protecting your smartphone.
This lightweight and rigid case is precision machined from solid duralumin to protect your iPhone from external shocks.
We have designed the part where the bumper touches the finger so that there is no uncomfortable feeling.
You can also operate the frequently used swipe smoothly.
The bumper for the iPhone 14 Pro model has a wider windshield opening than previous bumpers, which allows for the use of many commercially available protective glass films.
(The protective glass film mounting area (internal dimensions) of the bumper for the 14 Pro is 68mm wide and 144.1mm long.)
A lens guard bar is available as a new option.(Only for 14 Pro/14 Pro Max)
You can choose the lens protection method that best suits your TPO.
If the lens is placed directly on a flat surface, it will not come in contact with the lens.
A duralumin machined lens guard for 14 Pro/14 Pro Max is also available as an option.
You can protect your precious lens.
The bumper can be used with Apple's original MagSafe charger as well as many other aftermarket MagSafe accessories without any interference.
(Bumper in the image is for iPhone 14 Pro, accessory is a card holder made by MOFT.)
Aluminum shims and longer bolts (7.5mm) are included to eliminate rattling when placed on a flat surface.
Use according to your situation.
Strap holes are standard.
A strap can be attached to the bottom left of the front so it won't get in the way during calls.
You can put it in your pocket smoothly.
The bumper does not hide the antenna module part.
Everything is open and 5G can be used without any problem.
Collar bolt set (sold separately) (Model no: GI-305) can also be used for iPhone 14 series compatible cases since the bolt size is the same.
■About Qi Wireless Chargers
The iPhone 14 series compatible solid bumper can be charged with a Qi-enabled wireless charger.(Note 1)
■WIFI, 4G, 5G, MagSafe, Bluetooth, GPS, NFC
There is no problem with FaceID -> face registration, unlocking.
ApplePay -> No problem in normal use.(Note 2)
Wifi: No problem in normal use.(Note 2)
5G → No problem in normal use.(Note 2)
4G → No problem in normal use.(Note 2)
Bluetooth → No problem in normal use.(Note 2)
GPS → No problem in normal use.(Note 2)
MagSafe → No problem in normal use.
■About Protective Glass Film for iPhone 14 Pro
The solid bumper for iPhone 14 Pro is wider than GILD design's previous bumpers and can be used with a wide range of commercial products.
iPhone 14 Pro Protective Glass Film Installation Area (Internal Dimensions) → Width 68mm, Height 144.1mm
■Recommended protective glass film
Belkin protective glass film (model no: OVA109zz)
Product name: Belkin Protective Glass Film for iPhone 14 Pro with Tempered Glass
Made by Asahi Glass AGC Japan, 0.33mm, set of 2 with easy installation kit, clear
Caution
*The bumper in the picture is for iPhone 14 Pro and the accessory is a card holder made by MOFT.
*Shims and bolts alone cannot prevent lens interference.
*When aluminum shim is used to avoid lens contact, it cannot be used because the length of the bolt is not enough.
*About Qi-enabled wireless chargers: Charging is not possible when the aluminum panel included in collaborative products is attached.Please charge your iPhone with the Lightning cable that comes with your iPhone.
*(Note 1) The thickness of the bumper will cause the iPhone to be 1.5mm away from the Qi-enabled wireless charger.The charging efficiency may be slightly lower than that of the state where it is adhered.The charging time will also vary depending on the output wattage and adapter voltage of the Qi wireless charger you are using.
*(Note 2) Since this product is made of aluminum due to its characteristics, it may block radio waves to some extent and may have a slightly inferior performance in receiving radio waves.It may be difficult to receive the signal in the place where the signal condition is not good.If you are receiving a normal signal, there is no problem.
*We do not guarantee that all the protective glass films can be installed even within the inner dimensions of the case due to the limitations of the shape and other factors.Crystal Armor, tempered glass LCD film cannot be used because it is larger than GILD design bumper.
*Because this product is made of aluminum, radio waves will be blocked from the back of the main body.There is a possibility that the performance of receiving radio waves is slightly inferior.
*This product is not designed to completely protect your iPhone from shocks.GILD design is not responsible for any damage, breakdown, loss, data loss, etc. to the main body of iPhone.
*This product is designed to prevent the iPhone from contacting with the case by using shock-absorbing resin, but it is not designed to completely protect the iPhone from scratches.
*GILD design is not responsible for any damage to the main body of the iPhone caused by the attachment of this product.
*The specifications, appearance, and included products of the product are subject to change without notice.
*You may not be able to use aftermarket chargers.
*It may be difficult to receive the signal in the place where the signal condition is not good.If you are receiving a normal signal, there is no problem.
*Due to the characteristics of the anodizing process, it is difficult to finish the same color for each lot.Tried to keep the same color as much as possible, but due to the anodizing process, the color may vary from lot to lot.
*Because this product is anodized, the contact point where the electric current passes through is not colored.There are two points on the inside of the case that are not colored, but it is not a defect in processing.
*The product image is trying to make it close to the color of the real thing as much as possible, but there is the case that the change of the color is felt by the monitor of the personal computer that the customer uses, the color setting, indoor lighting, sunlight.
*The image may contain other colors.
*There may be changes in product specifications due to the manufacturer's reasons.
*Shims and bolts alone cannot prevent lens interference.
*When aluminum shim is used to avoid lens contact, it cannot be used because the length of the bolt is not enough.
*About Qi-enabled wireless chargers: Charging is not possible when the aluminum panel included in collaborative products is attached.Please charge your iPhone with the Lightning cable that comes with your iPhone.
*(Note 1) The thickness of the bumper will cause the iPhone to be 1.5mm away from the Qi-enabled wireless charger.The charging efficiency may be slightly lower than that of the state where it is adhered.The charging time will also vary depending on the output wattage and adapter voltage of the Qi wireless charger you are using.
*(Note 2) Since this product is made of aluminum due to its characteristics, it may block radio waves to some extent and may have a slightly inferior performance in receiving radio waves.It may be difficult to receive the signal in the place where the signal condition is not good.If you are receiving a normal signal, there is no problem.
*We do not guarantee that all the protective glass films can be installed even within the inner dimensions of the case due to the limitations of the shape and other factors.Crystal Armor, tempered glass LCD film cannot be used because it is larger than GILD design bumper.
*Because this product is made of aluminum, radio waves will be blocked from the back of the main body.There is a possibility that the performance of receiving radio waves is slightly inferior.
*This product is not designed to completely protect your iPhone from shocks.GILD design is not responsible for any damage, breakdown, loss, data loss, etc. to the main body of iPhone.
*This product is designed to prevent the iPhone from contacting with the case by using shock-absorbing resin, but it is not designed to completely protect the iPhone from scratches.
*GILD design is not responsible for any damage to the main body of the iPhone caused by the attachment of this product.
*The specifications, appearance, and included products of the product are subject to change without notice.
*You may not be able to use aftermarket chargers.
*It may be difficult to receive the signal in the place where the signal condition is not good.If you are receiving a normal signal, there is no problem.
*Due to the characteristics of the anodizing process, it is difficult to finish the same color for each lot.Tried to keep the same color as much as possible, but due to the anodizing process, the color may vary from lot to lot.
*Because this product is anodized, the contact point where the electric current passes through is not colored.There are two points on the inside of the case that are not colored, but it is not a defect in processing.
*The product image is trying to make it close to the color of the real thing as much as possible, but there is the case that the change of the color is felt by the monitor of the personal computer that the customer uses, the color setting, indoor lighting, sunlight.
*The image may contain other colors.
*There may be changes in product specifications due to the manufacturer's reasons.
Applicable Models
iPhone 14 Pro
