[Material] Duralumin A2017 material [Stem nut] Hard anodized [handlebar position (4 positions)] ・Street Hi (Stock) ・Street Low ・Racing Hi ・Racing Low [Handlebar] ・Total length: 280mm ・Inner diameter: 16mm [Sweep angle] ・Street: +5 degrees ・Racing: -5 degrees [Opening angle/height] free [Handlebar locks] Available [Handlebar stopper function] Available [Brake/clutch] ・Stock brake master, clutch holder compatible, Brembo RCS brake confirmed [Cables] Both gas pedal and clutch cables need to be rerouted. [Brake hose] *Position Street Hi ・Change the routing if the hose is stock ・When replacing the aftermarket hose, it is recommended that the hose between the master cylinder and the ABS unit be -10cm. [bearings] Under bracket side is included / Top bridge side is reused from stock
[Description]
[Position Details] *Orientation is determined with the rider astride the bike. ・Street Hi When installing the fork clamps, the clamp bolts face outward with the handlebar clamps facing up. Handle clamps are oriented +5 degrees when straddled.
・Street Low When installing the fork clamps, the clamp bolts face outward with the handlebar clamp mounting part facing down. Handle clamps are oriented +5 degrees when straddled.
・Racing Hi When installing the fork clamps, the clamp bolts face outward with the handlebar clamps facing up. Handle clamps are oriented at -5 degrees when straddled.
・Racing Low When installing the fork clamps, the clamp bolts face outward with the handlebar clamp mounting part facing down. Handle clamps are oriented at -5 degrees when straddled.
Caution
*CAFE is available as a separate item number. *Please prepare bar ends separately. *The oil tank and clutch wire may interfere with the meter cover depending on the position. *The brake hose needs to be changed to an aftermarket one or the routing needs to be changed.
*Installation requires specialized knowledge and tools, so please contact a professional shop for installation. *Special meter bracket included. *The light bracket, meter, horn, etc. can be used with the stock products.(Depending on the position, the cable guide bracket may need to be modified.) *Hole drilling to the handlebar is required to fix the switch box. *Use the stock clamp bolts for the under bracket. *When using N Project Blaster 2, Street Low can be installed by relocating the reservoir tank. *Street Hi can be installed by improving mirror interference + relocating the reservoir tank. *Other positions require reservoir tank relocation and cowl modification. *The image may contain other colors. *There may be changes in product specifications due to the manufacturer's reasons.
![[G-STRIKER] Clip-on Handlebar Kit + Under Bracket Set - Webike Indonesia](https://img.webike-cdn.net/s420/catalogue/images/119030/1102132224_5bdbd100c8b0a.jpg "[G-STRIKER] Clip-on Handlebar Kit + Under Bracket Set - Webike Indonesia")
![[G-STRIKER] Clip-on Handlebar Kit + Under Bracket Set - Webike Indonesia](https://img.webike-cdn.net/s420/catalogue/images/119030/0206155703_5e3bb8bf7ec5a.jpg "[G-STRIKER] Clip-on Handlebar Kit + Under Bracket Set - Webike Indonesia")
![[G-STRIKER] Clip-on Handlebar Kit + Under Bracket Set - Webike Indonesia](https://img.webike-cdn.net/s52/catalogue/images/119030/1102132224_5bdbd100c8b0a.jpg "[G-STRIKER] Clip-on Handlebar Kit + Under Bracket Set - Webike Indonesia")
![[G-STRIKER] Clip-on Handlebar Kit + Under Bracket Set - Webike Indonesia](https://img.webike-cdn.net/s52/catalogue/images/119030/0206155703_5e3bb8bf7ec5a.jpg "[G-STRIKER] Clip-on Handlebar Kit + Under Bracket Set - Webike Indonesia")
![[G-STRIKER] Clip-on Handlebar Kit + Under Bracket Set - Webike Indonesia](https://img.webike-cdn.net/catalogue/images/119030/1102132224_5bdbd100c8b0a.jpg "[G-STRIKER] Clip-on Handlebar Kit + Under Bracket Set - Webike Indonesia")
![[G-STRIKER] Clip-on Handlebar Kit + Under Bracket Set - Webike Indonesia](https://img.webike-cdn.net/catalogue/images/119030/0206155703_5e3bb8bf7ec5a.jpg "[G-STRIKER] Clip-on Handlebar Kit + Under Bracket Set - Webike Indonesia")