[PMCXGILD design]MonocoqueSwing Arm

Product number: 74-1041
- IN STOCK
- Out Stock

PMC
|
0.0
(0 review)

Rp33,400,000

*VAT included

Webike Points: +334,000 Points

Delivery information

Please select product form first.

to Jakarta, South Jakarta, Cilandak

CHANGE

Select address

Shipping Fee Rp60,000

Check my coupons

Quantity

100% Original 7 Days Warranty Free Cashback Net Price

Applicable Models

See All

Z1000MK2 72-80 Frame modification required Z1000A1 72-80 Frame modification required Z1000A2 72-80 Frame modification required Z750FX-1 72-80 Frame modification required Z750D1 72-80 Frame modification required Z750A5 72-80 Frame modification required Z750A4 72-80 Frame modification required KZ900 72-80 Frame modification required Z2 72-80 Frame modification required Z1R-1 72-80 Frame modification required Z1R-2 72-80 Frame modification required Z1000 72-80 Frame modification required Z750 72-80 Frame modification required Z1 72-80 Frame modification required Z750-1000 72-80 Frame modification required

Product Detail

Specification:

[Spec. ]
・Main pipeMaterial:Ultra Duralumin 7N01 material/figure of eye cross section
Chain Pull Dept.:A5083 wood
Surface finish:Main pipe:Polishing
Chain Pull Dept.:Silver anodized
Axle Shaft:20ΦHollow Axle Shaft

[Description]

[Product Detailed]
In response to the needs of Z-type heavy users, the "highest quality" Swing Arm that far surpasses conventional products has been completed!

Main features
Improved stability due to its amazingly high rigidity
Designed for 170SizeWide tire
Built-in oil catch tank eliminates the need for a separate tank

The main pipe is made of 7N01, the best aluminum material with a "figure of merit" square pipe (35x70mm), which is both highly rigid and lightweight..
The beautifully detailed weld bead marks and the shine of the carefully polished polish are a sight to behold..
To further enhance the performance of the suspension, the mount can be set to STD, +20/30/50mm..

Built-in oil catch tank
The Oil catch tank, which is required when the Air Cleaner Box is removed, is built into the FrontSpace, eliminating the hassle of installing a separate tank..

Suspension mount
The high rigidity and moderate bending of the RadialSportsTire is one of the features that make it possible to crush the RadialSportsTire of recent years..
Considering the option of 170Size wide tire, we defined the position of each 10mmOffset of oneQuantity:Pair (for Left and Right) against the Normal swing arm (w250mm) as Standard..
Chain line is also fully secured..
Mounting position can be selected from 4 levels of Lay-down 20mm, 30mm, 50mm in addition to Normal position..
The Offset collar required for the Frame SideUpper Mount of the Suspension is also included..

■Bearing use of Pivot section
The PivotMount, the heart of the Swing Arm, combines needle bearing and ball bearing as in the conventional product to achieve the smoothest movement performance in both radial and thrust directions..

■Material's commitment
The main pipe is made of A7N01 material as in the conventional products, and a custom-made stepped-angle pipe (35x70mm) is used to further increase the rigidity of the "figure-of-me" cross section, achieving both amazingly high rigidity and light weight..
The beautiful weld bead marks painstakingly carved to the smallest detail and the polished polish shine are clearly visible and convey the highest quality..

■Add Inside Breath Line
Breath Line added to the inside of the single surface configuration of the previous product.. Although it is in an inconspicuous location, a stamp will not be pulled out..

Adoption of Serial number
"This product is special."
Serial numbers are set individually with this in mind..
The image is testType, so the engraved characters may change a little, but we hope you can get a sense of the atmosphere..

Note

* This product will be made after an order, We will notice currect shipping time after we recieve an order. * This item can not be cancelled, returned nor exchange after placing an order.

Caution

*Please modify the product when installing an external muffler for each car model, as it may interfere with the product.
*The product is designed to be used with a floating brake. If you wish to mount the torque rod to the swingarm, please install the mounting stay by yourself. The image shows the rear floating kit 75-241 (special specification).
*Not for use on '76-'80 Z750-1000 and Z1R-1/2 as the stock rear master cylinder interferes with the swing arm. The image shows the backstep kit 74-2014.
*Models requiring frame modification:Z1/Z2,KZ900,Z750A4/A5/D1,KZ1000A1/A2,Z1R-1/2
*Frame modification is required to cut or widen the inside of the exhaust tail pipe mounting stay.
*There are cases that it contains other product in the photo.
*Please note that the product specification may change due to manufacturer reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.

Applicable Models

Model Page Links

KAWASAKI

[PMCXGILD design]MonocoqueSwing Arm

Applicable Models

Product Detail

Specification:

[Description]

Note

Caution

Applicable Models

Model Page Links

ALSO VIEWED PRODUCTS

PRODUCT READY TO SHIP

Recommend for You

BEST SELLING

MOST VIEWED PRODUCTS

New Custom Article

Apply Coupon

Image Review

Review detail