Check my coupons
Product Detail
Specification:
Guideline type electric tachometer: -12500RPM
White LED
Stainless steel body
Body size: Φ48mm
Screw size: M4 x 18mm
Mounting Pitch :37mm
Meter bracket: Steel with black paint finish
Installation time:1.3H
White LED
Stainless steel body
Body size: Φ48mm
Screw size: M4 x 18mm
Mounting Pitch :37mm
Meter bracket: Steel with black paint finish
Installation time:1.3H
[Description]
Φ48 Small DN Tacho Meter Kit 12500RP that can be installed next to a stock meter with simple wiring modification
■For CL250/500 stock engine bikes, we recommend 12500RPM as the RPM gauge (memory) can be used.
This product comes with a meter bracket that can be placed next to the stock speedometer and a sub-code that enables installation with simple wiring modification, so a Φ48 small DN tachometer (white LED) can be installed on CL250/500.
■Φ48 small DN tachometer
DN=Digital Needle
The angle of the pointer is completely controlled by digital signals and a small motor, resulting in high pointer retention and excellent reliability.
In addition to the RPM function, the meter is equipped with a thermometer, a clock, an engine work timer, and an automatic measurement function (maximum temperature record / maximum RPM record).
The black panel with white LED lighting provides excellent nighttime visibility.
■Guideline type electric tachometer: -12500rpm display
■The monitor is equipped with a variety of functions (digital display)
The thermometer (measuring up to 120°C) is equipped with a stick temperature sensor, so that the temperature at the drain bolt can be measured by purchasing our drain bolt (sold separately).
The temperature sensor can be mounted inside the cowl to measure the outside air temperature.
■Automatic measurement function
The maximum temperature record and the maximum rpm record are done automatically when the meter is installed.
After running, you can check the record by switching the meter display, and the record will be saved until resetting.
■Engine Work Timer
Timer that automatically adds up the engine operating time above 500rpm.
It stops when the speed drops below 500rpm.
Maximum time: 9999 hours (up to 100 hours is recorded in minutes, and over 100 hours is recorded in hours.Resettable.There is a non-display setting.)
■Clock
24-hour display.
There is a non-display setting.
■For CL250/500 stock engine bikes, we recommend 12500RPM as the RPM gauge (memory) can be used.
This product comes with a meter bracket that can be placed next to the stock speedometer and a sub-code that enables installation with simple wiring modification, so a Φ48 small DN tachometer (white LED) can be installed on CL250/500.
■Φ48 small DN tachometer
DN=Digital Needle
The angle of the pointer is completely controlled by digital signals and a small motor, resulting in high pointer retention and excellent reliability.
In addition to the RPM function, the meter is equipped with a thermometer, a clock, an engine work timer, and an automatic measurement function (maximum temperature record / maximum RPM record).
The black panel with white LED lighting provides excellent nighttime visibility.
■Guideline type electric tachometer: -12500rpm display
■The monitor is equipped with a variety of functions (digital display)
The thermometer (measuring up to 120°C) is equipped with a stick temperature sensor, so that the temperature at the drain bolt can be measured by purchasing our drain bolt (sold separately).
The temperature sensor can be mounted inside the cowl to measure the outside air temperature.
■Automatic measurement function
The maximum temperature record and the maximum rpm record are done automatically when the meter is installed.
After running, you can check the record by switching the meter display, and the record will be saved until resetting.
■Engine Work Timer
Timer that automatically adds up the engine operating time above 500rpm.
It stops when the speed drops below 500rpm.
Maximum time: 9999 hours (up to 100 hours is recorded in minutes, and over 100 hours is recorded in hours.Resettable.There is a non-display setting.)
■Clock
24-hour display.
There is a non-display setting.
Caution
*When installing this product on CL250 / 500, simple wiring modification is required.
*Please do not install any aftermarket H.I.D kit or any other company's LED headlights or fog lamps at the same time.Some ballasts / inverters (voltage converters) emit high-voltage noise that may adversely affect digital circuits, causing product failure or malfunction.
*Not completely waterproof due to the moisture vent holes.A hole is provided on the back of the main unit to drain moisture generated by changes in internal temperature due to operation.
*The lighting image is for Monkey 125(JB02).
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.
*There may be changes in product specifications due to the manufacturer's reasons.
*Please do not install any aftermarket H.I.D kit or any other company's LED headlights or fog lamps at the same time.Some ballasts / inverters (voltage converters) emit high-voltage noise that may adversely affect digital circuits, causing product failure or malfunction.
*Not completely waterproof due to the moisture vent holes.A hole is provided on the back of the main unit to drain moisture generated by changes in internal temperature due to operation.
*The lighting image is for Monkey 125(JB02).
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.
*There may be changes in product specifications due to the manufacturer's reasons.
