Check my coupons
Product Detail
Specification:
Coil type
[Material]
Zinc alloy, PA resin, GF, iron, PVC
[Size]
100.5 (H) x 76.5 (W) x 32.4 (D) mm
Cable 1000mm
[Component Configuration]
・Body x 1
・Spacer x 4
・Washer x 2
・Bolt cap x 2
・Reset pin x 1
・M6 x 40mm bolt x 2
・M6 x 55mm bolt x 2
[Material]
Zinc alloy, PA resin, GF, iron, PVC
[Size]
100.5 (H) x 76.5 (W) x 32.4 (D) mm
Cable 1000mm
[Component Configuration]
・Body x 1
・Spacer x 4
・Washer x 2
・Bolt cap x 2
・Reset pin x 1
・M6 x 40mm bolt x 2
・M6 x 55mm bolt x 2
[Description]
[Easy, safe, and fast because it is handlebar-mounted!]]
Simply extend the wire and thread it through the helmet for easy locking.
It locks quickly and allows you to leave the bike immediately and safely.
Coil wire type for easy storage and installation.
[Coiled wire lock]
The dial lock (3-digit) system eliminates the need to carry a key for locking!
Simply pull the lock out from the handlebar position.
Simply extend the wire and thread it through the helmet for easy locking.
It locks quickly and allows you to leave the bike immediately and safely.
Coil wire type for easy storage and installation.
[Coiled wire lock]
The dial lock (3-digit) system eliminates the need to carry a key for locking!
Simply pull the lock out from the handlebar position.
Caution
*This product is a lock for helmets.Not for use with anything but helmets.
*Images may contain other products and colors.
*There may be changes in product specifications due to manufacturer's reasons.
[Installation Requirements]
*The lever holder screws must be secured with two M6 bolts.
*The bolt alignment should be vertical and between 32mm - 35mm.
*There must be space for a helmet to be placed stably.
[Cautions for installation]
*Do not interfere with surrounding master cylinders, switches.
*Do not interfere with the tank or cowl when turning the handlebars.
*Images may contain other products and colors.
*There may be changes in product specifications due to manufacturer's reasons.
[Installation Requirements]
*The lever holder screws must be secured with two M6 bolts.
*The bolt alignment should be vertical and between 32mm - 35mm.
*There must be space for a helmet to be placed stably.
[Cautions for installation]
*Do not interfere with surrounding master cylinders, switches.
*Do not interfere with the tank or cowl when turning the handlebars.
Applicable Models
Universal
